Is there a way to create a table to display parametric information -- either Dimensional Constraint Parameters or User Parameters? This can be done with Inventor but I haven't yet found a way to do this in AutoCAD. I've also considered Data Extraction but this doesn't seem to recognize parameters.
View 1 RepliesI am looking for an Example of accessing 2011 AutoCad FX Table.
I would like to programmatically read and write dimensional and user parameters.
Is there a way to setup Field entry text in a Table that will control Dimensional Constraint Parameters in a model?
I basically want the control of the Parameters Manager to be in table form on the drawing that is usable and printable.
I have an IPart with about 100 instances in it that is sheet metal. I created a user parameter for the gauge of the sheet metal relating to the thickness and that works fine in the ipart. My dilema is how to get the gauge to show up in my drawing in the general table. Pretty much I woud like the table to list part number, material and then have a column for the gauge of the steel related to the thickness in the Ipart table. I am using Inventor 2011 if that makes a difference.
View 2 Replies View RelatedI have created a dynamic scale bar block that a user can edit two custom properties of (Horizontal Scale and Vertical Exaggeration) and the values on the scale bar will self-adjust after a regen. The block works fine if inserted into a drawing as per normal the normal insert method.
However, the issue I am running into is this:
If the block is inserted into a template drawing that contains our standard company titleblock (again this part works fine), and that layout is then imported into a new drawing using the "From Template..." right-click option on the Model/Layout tabs, the block loses the custom user parameters. Editing the block definition shows that the parameters are there, they just no longer have names or default values and do not appear in the properties window when the block is selected.
Trying to edit the user parameter names in the block definition of this imported copy of the block, just results in receiving an error that I'm attempting to use characters that are not alphanumeric.
I've tried this same procedure with 2013 and the issues still occur. I've tried user parameter names that don't have an underscore in them (just in case that was causing the issue), but again no luck.
I've attached a simpler block that recreates the same problem: Tester.dwg - this is the block that can be inserted into a drawing. It contains two user parameters "Tester" and "Tester_2". Inserting this block into a drawing shows the block works correctly (user parameters are editable from the properties window).Testing.dwg - this is a drawing that contains the above block inserted onto Layout 1. If Layout 1 is imported into a new drawing (using the "From Template..." right click option of the model/layout tabs), then the block no longer functions as it should. The two user parameters are no longer visible in the properties window.
I tried to report my dimensional constraints in my drawing as a table. Is it possible?
View 0 Replies View RelatedHow can you access user-defined parameters/function defined in the Parameters Manager dialog?
View 1 Replies View Related have a problem with the display of my constraints
after i uncheck the "show all dynamic constraints"
all the dimensional constraints stay invisible even i re check the show all
i can find a way to turn the visibility of the dimensional constraint on
Product Design Suite 2013
why can't I snap to a knot on a spline when trying to use a dimensional constraint? I can snap any other geometric feature like a line or a dimension string to a knot. I can grab the knot (also seems to be in the same place as the "fit point", yes?) and move it around, so why, why, WHY can't I use a dimensional constraint? I really need to be able to control a spline's fit points with dimensional constraints, but I can't get at them exept to manually move them around.
View 2 Replies View RelatedI need to copy about 15 user parameters from 1 part to about 300 others. I used the DA to copy the iproperties but the user parameters are also needed.
View 2 Replies View RelatedIs there a way to create user parameter as TEXT Paramters does not accept the text paramaters . we always have tor create parameters as numbers.
View 9 Replies View RelatedMoving right along with my Parametric Block programming tools. I have successfully created several linked parameters with formulas and values, and now I want to be able to show a select few of them in the Properties Palette (NOT Parameters Manager) for the inserted block ref. Taken from Stephen's example, here is my code for creating the AssocVariable (User Parameter)
Public Function AddOrModifyVariable(ByVal varName As String, ByVal varExpression As String, ByVal sourceObjectID As ObjectId, ByVal trans As Transaction) As ObjectId Dim db As Database = sourceObjectID.Database Dim varId As ObjectId = ObjectId.Null Using trans2 As Transaction = trans.TransactionManager.StartTransaction() ' Open the AssocNetwork Dim networkId As ObjectId = AssocNetwork.GetInstanceFromObject(sourceObjectID, True, True, "") Dim network As AssocNetwork = DirectCast(trans2.GetObject(networkId,
[code]...
I don't know if I need to create a dynamic block property (or if that can be done), or somehow get this AssocVariable to display on its own.I also noticed that the example for creating a parametric Dimension object, does not set the dimension to the right type of Dynamic dimension. (Play with the Constraint From property in the properties palette, be sure to regen in between).
Is it possible to add a user parameter into a general table in a drawing?
Example:
If I create a multi value text parameter called "Design", and give it two values "open" & "closed". Is there a way to add the chosen value into a general table on the drawing.
Autodesk Product Design Suite 2013
Win 7 Professional 32bit
Intel(R) Xeon(R) W3565 @ 3.2GHz QC
4.0 GB Ram
1GB Nvidia Quadro 2000
We are trying to add reference lines to the idw drawing for a sub-assembly. These lines represent centerlines of parts of the main assembly. The main assembly is not the reference file for the drawing. However, the required dimension setting the centerlines is a User Parameter in the sub-assembly. (The centerlines are represented by work planes in the sub-assembly file). Using iLogic, we were able to populate the User Parameter from the sub-assembly into the idw file. We can see it as a User Parameter in the idw file. However, when we go into sketch mode the User Parameter is not an option. In sketch mode, we pull a dimension between the two centerlines (d4). When you look at the parameters d4 does not exist so we cannot set d4 equal to our User Parameter (and we've looked there are no filters on). We need this dimension to be able to adjust as the length of the sub-assembly adjusts for different cases. Each case is unique and done on a job by job basis.
There are several places in our drawings where being able to place reference lines and set their relationship to the part would be very useful.
1. Why are the User Parameters not available for use in sketch mode on a drawing?
2. Why can the dimension IDs (ex. d4) not be seen by looking at the parameters?
3. alternative way of putting reference lines on a drawing?
I work with Inventor 2011.
It is possible to sort Parameters (user parameters) by code (simulating a click on column header) ?
I have a large collection of parts that are controlled from an exteranl rule. I need to make slight changes to the external rule, but for the changes to be successful I need two extra user parameters to be added to each of the parts. There are hundreds of parts, so going in and adding the two parameters to each would take days.
Is there a simple way of getting the external rule to add the two parameters?
P.s. My VB skills are pretty limited, but my understanding of iLogic is pretty good.
I have a dblock I built that has quit of few User Parameters. I know I can put the order I want them to display but is there a way to break them up by a blank line, or maybe subtitle a group of user parameters?
View 3 Replies View RelatedWhen I create blocks and give them dynamic elements, I often define user parameters in the block table. I have noticed that on some drawings when I open them and go to the block editor to edit them, the user parameters have no name, value, or expression and my dynamic will not work.
I have tried renaming them and putting the expression back in from the parameters manager, but it gives me an error message saying invalid parameter name.
I made an assembly that adjusted to sized based on some key parameters. These key parameters are controlled by a form in the main assembly. The keys parameters actually adjust the skeleton file, which then drives the frame, then all the parts are adjusted.
after changing these parameters all necessary parts would adjust to size and keep the location constraints. Worked quite well.
The issue now is that, we adopted a new naming convention and this assembly requires all the part files to be renamed. I meticulously saved each part as their new name and then replaced each component in the main assembly. This worked to an extent. The problem that I am facing is that when I saved each part as there new name, the new part retained the linked parameters to the old part. Is there a way to change this link to the newly name skeleton file?
I looked into design assistant for this process as well, but the only changes I think available were to add a prefix or suffix. If worse comes to worse, I can remodel this project but, I am sure there has to be a way to alter this.
attached is a single part with those parameters in the image above.
I have a part with very irregular shape created by projecting geometry of other parts.
I wondered if there is any way of calculating area of this extrusion instead of dimensioning the sketch and creating equasions in user parameters?
I have some parts with varies User Parameters that allow cusomization of part features. With numeric user paremeters we can check the export parameter box and then, in the description of the part we can refrence that parameter. For instance the description could be: =Width <Width>, Height <Height>, etc. Where it would desplay as Discription: width 22in, height 12".
We also have text User parameters. Is there a way to add these parameters to the description as well? They do not have the option of checking the export parameter box in the parameters table.
I need import all new params, rules and forms from a new template to older parts. I'm trying to use an external rule to create a new iproperties and import params from xml file but I can't assign these parameters with these iproperties.
I attach the code.
I would like to have a rule that will add specific user parameters to a part file. These parameters need to be formatted so the width, depth and thickness will control the description of the part.
IE:
Width=4
Depth=2
Thickness=3/16
DESCRIPTION = TS <Width>X<Depth>X<Thickness>
I would like to format each parameter so that the:
Format=Fractional
Precision=1/16
Unit string=False
This is what I have so far:
oMyParameter=ThisApplication.ActiveDocument.ComponentDefinition.Parameters.UserParameters
oParameter=oMyParameter.AddByExpression("Width", "TOP_RAIL_WIDTH", UnitsTypeEnum.kInchLengthUnits)
oParameter.ExposedAsProperty=True
oParameter.Units="in"
[Code]...
The TOP_RAIL parameters are from a linked file.
I am trying to export a user parameter that is a text string to a custom I property. I am able to export other parameters to custom properties that are numarical values. I export check box is missing on the text user parameter.
Is there a way to acomplish this with I-logic?
I want to change 'mutil value select" to "custom value input" in ilogic user parameters. something like this:
if condition A then
multivalue.setlist("length", 1,2,3,4,5)
else
(users can enter any value they want, how can i remove the list first and set it to custom value input?)
In our company, we put Excel tables in our drawings. The reason we've chosen for Excel-tables is that we can adjust the layout of the table quite easily. These tables consist of grouped cells in a particular company-specific layout. We select the range of the desired cells, copy and paste them in our AutoCAD drawing. This drawing is sent to our customers. The disadvantage of this method is, that when our customers (who use CAD-software of other brands) open the dwg, they don't see the table, but some kind of picture of the table.
Is there a way to 'explode' the excel-table, but keep the specific layout of the table? For attributes in blocks there's the 'Explode Attributes'-command in the Express-tools, but is there something similar for Excel-tables?
Product Design Suite 2014
Inventor 2012 SP2, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
How can I display iPart parameters in an iAssembly general table?
On my .dwg I would like to use one detail with a table. The 2 table columns I need are:
(1) iAssembly name (no problems here, shows up in the general table by default)
(2) Length (this parameter value is in the iPart)
Inventor RS 2011
AutoCAD Mechanical 2011
ASD 2013
Vault Collaboration 2011
Windows 7 Pro
But I was wondering if it is possible to contol the insertion of dynamic blocks and it user definerable parameters from a excel-text file.
I am surveying a section of pipework and I need to display the brackets that are supporting the pipes. As there are numerous pipes on top of each other I have decided to show the brackets in plan and isometric view.
I think I have made the dynamic block ok and have numerous stretch/move and scale parameters working correctly.
But the only way that I can see of chaging these parameters at the momment is by manually typing them in the properties tool pallete for each individual block.
So I was thinking that if I can store the correct values that I need for each parameter in the dynamic block on our data logger along with the correct E,N,Z insertion point is it possible for this file to change the parameters in the dynamic block for example, If I have the correct insertion point stored and then have 10 parameters stored with that point for simplicity I store as A=5.00,B=8.00,C=0.100 etc and these correspond with the parameters in the dynamic block will this file be able to alter the dynamic block as the values in the excel/Text file are displayed.
I created some tables in the attached AutoCAD Map 3D 2011 drawing by copying and pasting cells from an Excel 2007 workbook.
I have been able to update the tables in AutoCAD and print without any problems. However, when a second user opened the drawing, the table text was missing (the lines were present).
Note: We are saving our files in AutoCAD 2010 format for compatibility with some LT users.
I have an iPart that I have created parameters to perform some basic calcs so the values will show up on every member. The parameters are correct for the different member so it appears to be working correctly on the model side. For example I have a parameter called 'CutLength' that performs simple math functions. But when I make the table on the drawing and I include this parameter, I see the formula in the table instead of the value. Is there a way I can have it display the value instead of the equation?
View 2 Replies View RelatedIs there any way you can use the "Application option" "user name" in a revision table column?
The "APP'D" by "Author" is not very useful considering most changes are done by various people.
If this is not an option could it possibly be added?