I would like to instantly launch an External Rule just by clicking on a button in the Global Forms area of the iLogic browser. Is this possible, and if so, how would I do it?
Product Design Suite Ultimate 2014 | Vault Basic 2014 (SP1)
Dell Precision M6600 | Intel i7-2820QM - 16GB
nVIDIA Quadro 4000M | Windows 7/64 Pro
Is there someway to launch an external iLogic rule with VBA?. I'd like to add a button to run the iLogic rule.
Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB
I want to simply set a custom iproperty as the Description in each part file within my assembly. I can do this easily at part level with ilogic but I want to be able to run the rule from the assembly level and all the parts run the rule. I am struggling to find a way to do this.
I think this may be the best method I have found but I think it must be far easier?
[URL].......
I am working for customer with a simple item with his iLogic design. He has created a simple form to modify his iProperties. To modify the current material, a multi-value parameter was created and the following rule as a local rule;
"MultiValue.List("MATLIST") = iProperties.Materials
iProperties.Material = MATLIST"
He is now trying to make this an external rule but gets the following error
Error in rule: Mat2, in document: Mat2.iLogicVb
iProperties.Material: is probably a bad material name.
The more info tab says:
System.ArgumentException: iProperties.Material: is probably a bad material name.
at iLogic.CadPropertiesInRule.SetDocMaterial(Document doc, String matName)
at LmiRuleScript.Main()
at Autodesk.iLogic.Exec.AppDomExec.ExecRuleInAssembly(Assembly assem)
at iLogic.RuleEvalContainer.ExecRuleEval(String execRule)
I have an ilogic external rule which contains functions that I use from rules in my local assembly document. I'm trying to access the value of a parameter in the document from the external rule's function. Attached is a simple version of what I'm trying to do. If I manually run the external rule, it seems to work just fine, but when I call on the function from a seperate rule, its unable to get the parameter value. I get an error stating, "'Parameter' is not declared. It may be inaccessible due to its protection level."
'this is the external rule. if I run this manually, it works
Public Class test_functionsSub Mainmyresult = ""thisisatest(myresult)MsgBox(myresult)End SubFunction thisisatest(ByRef resultcreated As String)resultcreated = "it worked - " & Parameter("ParameterInDocument")End FunctionEnd Class
'this is my rule in the assembly document trying to use the external rule's function
AddVbFile "z_testrule.iLogicVb"Dim external_rule As New test_functionsmyresult = ""external_rule.thisisatest(myresult)MsgBox(myresult)
Is it possible to run an external rule in assembly occurrences?
You have RunRule in Component, But it does not seem to work with external rules
I referenced to occurrences and opened it using ThisApplication.Documents.Open(filepath, False)
Then i tried calling the same external rule. I thought it would run the external rule in the opened file,
but I ended up with a infinite loop on the main assembly.
Is there a way to run your rule in every occurrence with external?
Is there any way to pass an array from an internal rule to an external rule in iLogic?
View 2 Replies View Relatedwhy this will not run as an external rule? It runs fine as an internal one.The error I get is object referance not set to an instance of an object?
'Updates rule when done
iLogicVb.UpdateWhenDone=True
'Creates input list dialog box & allows the user to choose the state
Product_Code=InputListBox("Enter Product Code", MultiValue.List("Product_Code"), Product_Code, Title :="Product Code", ListName :="Available Codes")
'Writes values to iProperty
iProperties.Value("Project", "Cost Center")=Product_Code
Created in the template sheet metal rule. Why External ilogic rule is not working? User-valued parameter is created, sheet metal rule does not change.
name = ""For Each par In ThisDoc.Document.ComponentDefinition.Parameters.UserParameters If par.Name = "SMR" Then name = par.Name Exit For End IfNextIf name = "" Then Dim MyArrayList As New ArrayList For Each st In ThisDoc.Document.ComponentDefinition.SheetMetalStyles MyArrayList.add(st.Name) Next ThisDoc.Document.ComponentDefinition.Parameters.UserParameters.AddByValue("SMR", "", UnitsTypeEnum.kTextUnits) MultiValue.List("SMR") = MyArrayList Parameter("SMR") = SheetMetal.GetActiveStyle()End IfSheetMetal.SetActiveStyle(Parameter("SMR"))iLogicVb.UpdateWhenDone =TruePS:
How to create external ilogic rule?
View 3 Replies View RelatedIs it possible to place an external iLogic rule under a specific Event Trigger in a file via the API?
Inventor Professional 2014 64 Bit
Windows 7 Professional
NVIDIA Quadro FX 4600
Dual Intel Xeon E5540 CPUs
16GB DDR3 Ram
I've made an External rule in Ilogic that must read a parameter value (Thickness) to set a value in a property (StockNumber).
The value is not written to the property by Using 'Select Case', see code. There is no error or something like that. So what am I doing wrong?
Tested in an internal rule, where Select Case = <Thickness> instead of Parameter ("Thickness") and that works fine.....
Select Case Parameter("Thickness")Case 2iProperties.Value("Project", "Stock Number")="686001"Case 4iProperties.Value("Project", "Stock Number")="686002"Case 3iProperties.Value("Project", "Stock Number")="686003"End SelectiLogicVb.UpdateWhenDone = True
I tried to read an environment with iLogic and to combine it with an external rule name and to pass the whole path over to iLogicVB.RunExternalRule.
StrPath = Environment.GetEnvironmentVariable("ILOGIC_DIR")ilogic_rule = "IPT__01_New_Document_EXT.iLogicVb"rule = StrPath & ilogic_rule'MessageBox.Show(rule, "iLogic Rule to execute")iLogicVb.RunExternalRule(rule)
The message box shows the correct path, but I allways receive a error massage:
'GetEnvironmentVariable' is not a member of 'Inventor.Environment'
My company has recently switched from the H drive to the G drive. This has resulted in a lot of old files still referring to the H drive where the External Ilogic rules used to be. I'm wondering if there's any automatic way to change that? Uploading a pic showing the event triggers as they are now.
Inventor 2014 Professional
Windows 7 Professional 64 bit
Intel Xeon E3-1240 @ 3.4 ghz
Nvidia Quadro 600
8.00 gb RAM
I need import all new params, rules and forms from a new template to older parts. I'm trying to use an external rule to create a new iproperties and import params from xml file but I can't assign these parameters with these iproperties.
I attach the code.
I have an ipart that uses a simple form to control its length. This part is used in an iassembly whic has other forms to control constraints.
I would like to be able drive the ipart form from inside the assembly.
I am trying to setup some rules to print various PDF files which we have managed to do without any problems.
The bit I am stuck on is when one of the PDF files being saved is open by another user.
We have been able to error trap it when it is open by showing a message box on error asking them to close the file befopre continuing. The current message box being used is the Retry / Cancel box.
When the user clicks Retry we would like it to re-run the rule, or loops through the rule and check is the file is still open. If the file is open return the same error, and if the file has been closed save the PDF file. When Cancel is pressed it ends the rule (This Bit has been done).
My questions is how do I get the rule to re-run / loop through when the retry button is pressed.
Is it also possible to show the user who has the file open (or Previewing it in a Window Explorer)?
I have attached the Code currently Being used but I can post it here of preferred?
I'm trying to find a way to add a custom button to my ribbon that will launch a global rule or form using VB. I know of a way using VBA but I want to get away from VBA. I'd much rather create an add with VB and use that.
I'm currently running IV 2012.
Adobe 5 closes immediately when I click the "Print" button.
View 3 Replies View RelatedHow to customize the Submit button in EdgeHero forms? I would like the button to say something other than "Submit". I tried embedding text into the rectangle, but when the page is rendered in a browser, it throws the text outside of the submit button box and it still says "Submit" on the button.
View 11 Replies View RelatedIs there a way to invoke the iLogic Rule Editor and pass it an existing rule name or external rule for editing?
View 4 Replies View RelatedI need a way to run a rule which is saved in my top-level assembly using iLogic rule which is saved in a part file in the parent assembly.
I have even tried using an external rule in a txt file, but that gives the error "Component: This function can only be used in an assembly." - which makes no sense to me. I hope I am just missing something simple. I cant believe with all its other strengths, that iLogic would be so limited in that regard. Why is there not simply a snippet under the 'Run Other' that allows you to specify an assembly file and the rule name? (like there is for running a rule in a component from the assembly)
I am looking for creating a button that will open a PDF file (Manual). The purpose would be to have our users open our draftig procedures manual by clicking this button without the need to close autocad.
View 2 Replies View RelatedI am trying to use iLogic to create the file types I need to give to my vendors once I have created a drawing.In the .idw file I have a rule that creates a .pdf file and .dwg file. I also want it to activate a rule I have in the .ipt file that creates a .dxf file.
trigger = iTrigger0oType=Left(ThisDoc.FileName(False),3)GoExcel.Open("S:DRAWINGSFolder Types.xlsx", "Sheet1")For rowPN = 1 To 200 If (GoExcel .CellValue("A" & rowPN) = oType) Then oFile = GoExcel.CellValue("C" & rowPN) Exit For End IfNextoFolder = "S:DRAWINGSNOT RELEASED" & oFileIf Not System.IO.Directory.Exists(oFolder) ThenSystem.IO.Directory.CreateDirectory(oFolder)End IfThisDoc.Document.SaveAs(oFolder & "" &
[code].....
What is the best way to make art forms with inventor?
View 9 Replies View Relatedhow to delete iLogic forms from Inventor 2013 parts/assembly using VB.net 2010?
I am able to delete all the rule using "Activated_iLogic.DeleteAllRules(PartDoc)" but "Activated_iLogic.DeleteAllForms(PartDoc)" or "Activated_iLogic.DeleteForm(PartDoc, FormName)" does not give me the result I was expecting and Google is not showing any result related to this.
From iLogic i got a lot of information. And i want to configure or display this in a form.
But without having to make parameters for everything.
Example:
Display the stocknumber of an ipart/iassembly.
Configure the parameters from a part in the main assembly.
I am just playing with iLogic forms and I have set a slider to move a part in 15 degree steps from 90 to 180 degrees, all is fine but the slider is on the left for 90 degrees and on the right for 180 degrees, I would like it to be able to be set so that 180 is on the left of the slider and 90 is on the right of the slider. is this possible?
View 3 Replies View RelatedI'm trying to build a simple ilogic form to fill out iproperty infomation for parts we generate. Our company only uses a few of fields that are available. The problem is that the Physical tab is not available in the form editor. I would like to add this field to my form to be able to select the material for the part. The style/standard editor in our part template file holds all materials we use. Summary, Project, Status, and Custom are all available, why isn't Physical?
View 9 Replies View RelatedI have a small problem with iLogic forms picture folder. Is there a way of seting the image by the selected tab ?
I want to update the image by the tab selection.
I have tried "if" or "select case" and neither one worked. as I am saying Stair_Properties = True it only makes the tab active. It doesnt indicate if it is selected, here is the code :
If Stair_Properties = True ThenImage = "Image 01"End IfIf Railing_Properties = True ThenImage = "Image 02"End IfIf Riser_Properties = True ThenImage = "Image 03"End If'Select Case Image'Case Stair_Properties'Image = "Image 01"'Case Railing_Properties'Image = "Image 02"'Case Riser_Properties'Image = "Image 03"'End Select
I would like to know if it is possible to make a form with multiple forms, depending on the selection a could build a rectangle, or a cilynder or a cone.
View 3 Replies View Related