I have a serious problem with Photoshop cs6 during the drawing with a large number of forms (about 30 ...).Appear in drawing the colored squares, lines and other defects, randomly placed in the drawing.If I save the image, close and reopen itthe drawing is ok.
My system is:
Mac Pro
Mac OS X 10.7.5
Intel Xeon quad-core "Nehalem" a 2,8 GHz
12 GB (3 x 4 GB)
HD Serial ATA da 1 TB a 3 Gb/s e 7200 giri/min
ATI Radeon HD 5870 1 GB
I have an ipart that uses a simple form to control its length. This part is used in an iassembly whic has other forms to control constraints.
I would like to be able drive the ipart form from inside the assembly.
Every time I try to open a drawing I get the pop up stating that it can't be opened because of incomplete or corrupt information and needs to be recovered, but when I recover the file the audit doesn't find any errors. I can open the file, but this is kind of annoying to have to do this each time. I've purged the drawing, ran an audit, and verified that there aren't any problematic blocks or anything like that.
View 5 Replies View RelatedIs there a way to check in VBA if the design doctor has found errors in a drawing? I have a mass print script and it'd be handy to be able to skip printing any drawings that have errors like unatached dimensions and such.
View 2 Replies View RelatedI want to use Photoshop Elements (2002) to add typed information onto pdf forms like I do in PS CS
View 2 Replies View RelatedThis is a cropped corner of an illustration I removed from its opaque background and placed on a transparent background. The north and west borders show the whilte line that forms whenever I place objects on a transparent background. The south and east borders are the cropped edges -- they are clean and make the trasition from object to background color without that white line. With some objects, it's possible to use the Plygonal Lasso Tool, for instance, and trim that object away from the background. With portraits or irregularly shaped objects, though, it's necessary to use the Magic Wand or other means to trim the background away from the object, which results in that unwanted white line. Defringing, Removing White Matte, Anti-aliasing, trying to predict what color you'll lay the silhouette on and working in that color, and on and on. It seems as though Photoshop would be relied upon heavily by professionals who need to place objects on top of one another without intrusion.
View 3 Replies View RelatedI would like to offer my customer the option of posting a pdf quiz on her website. Where the customer would fill in the answer fields, along w/ name, phone, etc.
Am I able to create it in X5?
I'had just met another matter for my Add-on. I noticed that when I instance a new drawing, while a first one is opened, when I load a new Form, this one keep all first drawing's properties. What could happen?
For example, I would like to add the layer list on a ComboBox.
My source:
Private Sub LayerBox_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load '***************************' '* Initialisation LayerBox *' '***************************' Using acTrans = acCurDb.TransactionManager.StartTransaction() acLyrTbl = acTrans.GetObject(acCurDb.LayerTableId, OpenMode.ForRead) For Each acObjId As ObjectId In acLyrTbl acLyrTblRec = acTrans.GetObject(acObjId, OpenMode.ForRead) ComboBox1.Items.Add(acLyrTblRec.Name) Next acObjId End Using End Sub
This source works, but if i instance a new form on a new drawing, the first drawing's layer list is kept and the new layer list on the second drawing is ignored!
What is the best way to make art forms with inventor?
View 9 Replies View RelatedOne set is light, and the other is "dark," so to speak. Just wondering what filters and what not are used. I am aware that a lot of it comes from the actual lighting itself while the photo is being taken. I am just wondering what is being used and how this is done.
The "light" photos some "pin-up" technique, I am guessing. (Moti Malul Photography):
motimalul6.jpg (231.97K)
Number of downloads: 10
The "dark" photos. I am guessing a lot of dodge and burn, but to what extent?
the marquee select with the rectangular selection is often very limitated. Sometimes I wish to select multiple objects with a "free form", for example drawing the selection area with a polyline tool. Is this possible? I did not find a way to do it with the tool in CorelDraw (X5). Neither did I find solutions in the internet.
There's one tool, that does something very similar: the shap tool with ALT key can be used to select nodes by drawing a free line around the node. This is what I mean, but for objects not node.
how to delete iLogic forms from Inventor 2013 parts/assembly using VB.net 2010?
I am able to delete all the rule using "Activated_iLogic.DeleteAllRules(PartDoc)" but "Activated_iLogic.DeleteAllForms(PartDoc)" or "Activated_iLogic.DeleteForm(PartDoc, FormName)" does not give me the result I was expecting and Google is not showing any result related to this.
From iLogic i got a lot of information. And i want to configure or display this in a form.
But without having to make parameters for everything.
Example:
Display the stocknumber of an ipart/iassembly.
Configure the parameters from a part in the main assembly.
Can you round over existing solid forms in autocad 2010. My solid is 30mm thick and I want to round-over the edges with a 6.5mm radius.
View 2 Replies View RelatedI've created a personalized invoice form in which I integrated a Microsoft Excel from to it. Ever since the version I integrated my Excel forms it has always been an issue.
When I integrate a Microsoft Excel form in CorelDRAW and apply changes to it, the form doesn't retain its size and emplacement. The change VERY slightly, but still ALWAYS change.
I am just playing with iLogic forms and I have set a slider to move a part in 15 degree steps from 90 to 180 degrees, all is fine but the slider is on the left for 90 degrees and on the right for 180 degrees, I would like it to be able to be set so that 180 is on the left of the slider and 90 is on the right of the slider. is this possible?
View 3 Replies View RelatedI'm trying to build a simple ilogic form to fill out iproperty infomation for parts we generate. Our company only uses a few of fields that are available. The problem is that the Physical tab is not available in the form editor. I would like to add this field to my form to be able to select the material for the part. The style/standard editor in our part template file holds all materials we use. Summary, Project, Status, and Custom are all available, why isn't Physical?
View 9 Replies View RelatedI have a small problem with iLogic forms picture folder. Is there a way of seting the image by the selected tab ?
I want to update the image by the tab selection.
I have tried "if" or "select case" and neither one worked. as I am saying Stair_Properties = True it only makes the tab active. It doesnt indicate if it is selected, here is the code :
If Stair_Properties = True ThenImage = "Image 01"End IfIf Railing_Properties = True ThenImage = "Image 02"End IfIf Riser_Properties = True ThenImage = "Image 03"End If'Select Case Image'Case Stair_Properties'Image = "Image 01"'Case Railing_Properties'Image = "Image 02"'Case Riser_Properties'Image = "Image 03"'End Select
I would like to know if it is possible to make a form with multiple forms, depending on the selection a could build a rectangle, or a cilynder or a cone.
View 3 Replies View RelatedWhat is it for and how do I use it? Will it allow me to switch between different pictures for display on my iLogic form?
If so? How do I set which picture to display?
how to create a check box for parameters in forms in inventor 2013, i have modelling a door which contains to many types of locks and where they are placed so i need to create check boxes to pick multiple items so i need to know how to insert them.
View 8 Replies View RelatedHow to create artwork that uses the styles of traditional art forms such as oil, watercolor, acrylic painting? Or even Crayon, pastel, charcoal, sketch drawings? As in recreating the how the brush strokes in sketching or oil painting or like crayons the texture. Mostly the recreating the overall styles of those traditional mediums?
View 11 Replies View RelatedI have a form I have to fill out every day several times according to the client, but this information comes from a spreadsheet.
View 8 Replies View RelatedI am using acad 2012, and VS 2010 (C#) on win 7 64 bit.
I made a form, and showing it as modeless via Application.ShowModelessDialog... as recommended by everyone and that works fine.
I have a button that does something, and I set a break point right on the first line of code for its callback.
The button runs fine, but VS is not stopping at the break point.
Is there a different technique required when debugging modeless forms?
[URL]
I had some success transferring geometries, generated with an advanced math software, to Inventor using IGES files containing Manifold Solid B-Rep Object Entities (Type 186) (see the specification IGES5-3_forDownload-1.pdf). Now I would like to include several Type 186 entities into a single IGES file and form the geometrical unit of these (and them), for which the IGES Boolean Tree Entity (Type 180) seems to exist. I'll do some trial-and-error testing, but it would be very useful to have a (reliable) list of all IGES entities the Inventor IGES import function does or does not support (like these: Transcendata, MoldflowInsight). Unfortunately I could not find such a list anywhere.
Another question: Are the IGES import/export functions of Inventor written by Autodesk (and/)or are third-party libraries used? If the latter, which ones?
I set up a Form in Inventor using parameters that are driven from Excel. I cannot edit the form.
View 6 Replies View RelatedAleays that I change the selection "MODO" ("D e i" instead of "Z1 e Z2" and vice-versa), I need run one more time for the rule sense the changing.. when the right is run one time.
iLogicForm.Show("FLAMA-GEARS", FormMode.Modal) If MODO = "D e i" Then iLogicForm.Show("D e i", FormMode.Modal) End If If MODO = "Z1 e Z2" Then iLogicForm.Show("Z1 e Z2", FormMode.Modal) End If
simple programme for consecutive numbering of forms while digitally printing? e.g. adding consecutive numbers to a batch of pre-printed invoice sets. One original, but numbers on it increasing or decreasing as they are printed.
View 6 Replies View RelatedHow to customize the Submit button in EdgeHero forms? I would like the button to say something other than "Submit". I tried embedding text into the rectangle, but when the page is rendered in a browser, it throws the text outside of the submit button box and it still says "Submit" on the button.
View 11 Replies View RelatedI would like to instantly launch an External Rule just by clicking on a button in the Global Forms area of the iLogic browser. Is this possible, and if so, how would I do it?
Product Design Suite Ultimate 2014 | Vault Basic 2014 (SP1)
Dell Precision M6600 | Intel i7-2820QM - 16GB
nVIDIA Quadro 4000M | Windows 7/64 Pro
In Autocad Arch 2013, is there some parameter or option that will turn off the default behavior of dropping out part of the hatch or color, around a peice of text? In other words I don't what the white space that forms around a text object when I apply a hatch or color region.
View 1 Replies View Related