AutoCAD Inventor :: Wrapping An Appearance To A Sphere
Oct 6, 2012
I've been attempting to create a sphere with an Earth texture, for which I've made a custom appearance with a flattened picture of earth. Instead of wrapping to the sphere, however, the image is mirrored on both sides of the sphere and extremely distorted. I knew wrapping 2D geometry to a sphere was not strictly possible, but is there no way to pull it off with an image?
If not, would something like this be possible in 3DS max?
View 9 Replies
ADVERTISEMENT
Oct 20, 2005
I'm trying to find a quick way to realistically wrap text onto the surface of this sphere, and initial experiments in CS2 with the Arc warp and some perspective finangling have proved below expectations.
View 9 Replies
View Related
Jan 1, 2013
I was checking out this tutorial on wrapping a bitmap around a sphere, and I downloaded the referenced filters. The filters did not seem to work. The spherical mould tool seems not to work for me either.
View 4 Replies
View Related
May 16, 2012
Why does the table wrap like this (see attached)?? Shouldn't it place the wrapped rows on the bottom?
View 6 Replies
View Related
Jul 6, 2012
What is the best setting for shrink wrapping an assembly?
I've found shrink wrapping it as a surface causes problems with the video card when rotating the model and placing views on a drawing.
View 9 Replies
View Related
Feb 27, 2013
I'm attempting to use the "emboss" feature and wrapping the text to the surface of the part.
Attached is the example of the part I am working with. Also attached is the error message I receive after attempting the process. Is there another way to wrap the text about the surface of a "coiled" face?
View 2 Replies
View Related
Feb 7, 2013
how to Wrap the text shown here. Obviously the Column labeled "ITEM NO." would be 1, 2 , 3 etc. So I would like that column to be smaller. When I make the column smaller, the wording disappears.
View 1 Replies
View Related
Dec 6, 2012
When a parts list in an Inventor drawing is wrapped it always takes the bottom portion and kicks it to the left.
Is there a way to kick it to the right? So when you are looking at the BOM it reads such that item 1 is in the first group and not the second.
View 3 Replies
View Related
May 1, 2012
Having trouble Wrapping projected curve to a surface of a cylindrical solid to make a barrel cam,
View 2 Replies
View Related
Nov 2, 2013
In the attached Inventor 2013 ipt, I am trying to use the extrude / cut command to lop off the top of the sphere and I am not having any success.
View 1 Replies
View Related
Apr 6, 2013
I have a sphere which I'm able to project on a sketch of smaller circles which I'd like to engrave over it's surface, yet I want each of them to be perpendicular to the surface of the sphere in each point. Emboss doesn't do the trick, it just makes the engraving perpendicular to the plane.
View 9 Replies
View Related
Jun 5, 2013
Any step by step procedure, to create semi-sphere in Inventor or how to draw semi-sphere ?I am unable get this semi-sphere, using all the "extrude", split" options.
View 9 Replies
View Related
Mar 6, 2013
I have a sphere body whose material is partly removed by a boolen subtraction with another sphere. When I query the EdgeLoop of sphere for Outer edge loop using function InvEdgeLoopPtr::GetIsOuterEdgeLoop(), I always get a value of VARIANT_TRUE. check for the inner and outer loop of a sphere? use the attached file for reference.
View 3 Replies
View Related
Aug 22, 2013
I have a funnel with a curved top. I'm trying to project an inset of the border onto the curved surface and use the shell command to create a hollow funnel with an overhanging lip. I have projected the inset successfully, but cannot select the resulting smaller face, just the whole original face.
A similar problem that I tried while attempting to figure this out was shelling a sphere. 2d sketch -> 3d sketch project onto surface, and try applying shell to the resulting "face". However I can only select the whole face when trying to shell.
View 7 Replies
View Related
Jul 11, 2012
I am trying to create a spheric container with a irregular pattern of different triangle as show in the example attached.
What would be the best way to creat this part? i was thinking of creating each triangle in a different .ipt and after assemble them all toghter. But this will take ages and a lot of ipt.
View 1 Replies
View Related
Sep 15, 2013
I need an intersection of the surface of a sphere and a plane, producing a circular line.
I do not know how to do that.
View 2 Replies
View Related
Dec 3, 2013
I'm looking to use Inventor Studio to render a model, using an image sphere (e.g. Stuttgart Courtyard) as the background.
I cannot find the installed location for these images, so even if it is the active view, Inventor will not allow me to render it, and I cannot manually select the file as my image sphere.
Also, are additional such image spheres available for download?
Inventor 2013
Win 7 Pro SP1 (x64)
View 3 Replies
View Related
Jun 21, 2013
What are the parameters for a parametric 3D Equation Curve to create a path for a coil similar to that in the attached image?
Or alternatively tell me how I can produce the coil in some other way!
View 9 Replies
View Related
Sep 19, 2011
I need a path on a sphere like on the image I attached (sphere_spiral) for the result similar to image called "gomb". The only problem, metric spiral or coil / 3d helical curve path won't work because it doesn't end the result I need, because the lines are converging each other. So, I figured out I need a logarithmic spiral 2D sketch or maybe a sinusoidal path.
I need a path from the sphere's top center point to the bottom center point, projected to its surface with equal distance of lines.
View 4 Replies
View Related
May 31, 2013
Is it possible to add a Appearance tab to a Ipart table? I am cataloging a set of parts and one part is made with steel but in Gloss - Black and Matte - Black and i'd like to differentiate the 2 without haveing to make 2 seperate Ipart files.
View 2 Replies
View Related
Aug 24, 2012
I'm having trouble finding or creating an 'appearance' that actually looks like glass. Each of the appearances in the Inventor library and Autodesk libraries are milky and not very transparent at all. I'd like to find or create a material that is almost 100% clear, but reflects the environment.
The transparency slider scales from 0-100% but the results are more like 0-75%.Inventor Studio looks just as bad.I've got to believe that it's not impossible to do without Showcase or 3DS Max.
View 2 Replies
View Related
Jan 10, 2014
I need to do a ray-traced rendering of a smooth black anodized surface.
However when using the "Anodized Black" appearance, I get a speckled surface when using ray trace, and the part looks like galvanized steel.
View 1 Replies
View Related
Nov 12, 2013
In Inventor LT, it would be very useful if some of my parts were translucent in appearance. I have changed the "feature appearance" of the extrusion to Polycarbonate Clear" but it's still at the default grey.
View 5 Replies
View Related
Dec 7, 2012
How to set Autodesk Appearance Library as default using API
View 2 Replies
View Related
Jul 15, 2013
I created a host of materials with a certain appearance etc and saved them as a library. When I open my Inventor 2013 this morning I seemed to have lost my appearances. It says my materials are missing the Appearance asset - see attached screenshot.
What is this, and how can I rectify the problem?
View 5 Replies
View Related
May 22, 2013
How can i have extrusion 3 with the Glass appearance or clear so as to look like Glass ?
View 2 Replies
View Related
Mar 6, 2013
I am clearing an override of a part in a subassembly. I tried to use the clear appearance button but I get message saying Active Design View has no appearance overrides which is not true. You can see in my attachment there clearly is an override from Chrome-Polished in the IPT to Satin- Brushed in the IAM.
There is no "Clear Override" in the Appearance pull down. I think I used to be able to click on color As Part in previous Inventor version but now it's different. The black areas are embossed features representing silkscreened graphics I need to preserve.
I tried to post the files in Inventor/Customer Files NG but the "new message" button was grayed out & not working.
View 6 Replies
View Related
Jan 7, 2013
I have an xml file with RAL colors I used befor the new appearance was added in Inventor. Now I want to use ral colors in Inventor 2013 but that I can not manage. how I can add ral colors and also properly be given in my parts.
View 1 Replies
View Related
Jun 17, 2013
Just got upgraded to version 2013 by IT. Seeing that AD still can't maintain consistency from vers to vers. This version replaced 'Color Styles" with 'Appearances'. But, not just appearances, you have Document Appearances, the Autodesk Material Libray, the Autodesk Appearance Library, and the Inventor Material Library.
Why would the Material libraries show up when clicking the Appearances button when there is another button right beside it to get to Materials.
I mean, who is really going to use several dozen different types of flooring. And why is some metal in the metal category and some in default Category. And then some is in the metal Type and some in the generic Type. Is there really a need for two fields for organizing 'appearances' ? If this were a graphical design program I couls see some of this but it is a cad program. Seems like a case of trying to tailor one product to too many markets.
To the question. How do I unlock the Autodesk Appearance Library so I can get rid of all the junk I don't need and add some really obvious ones that are not there.
View 2 Replies
View Related
Sep 20, 2012
I have a problem when I want to use a cutout.
My purpose is to get a perforated plate but Inventor doesn't show this.
Only the black color is shown and not the holes.
View 9 Replies
View Related
May 2, 2012
In 2012 (and earlier) you rotated the texture in Style Editor. This was limited vs the new method.
I have parts with lots of faces and need to rotate all the faces at the same time, like 2012.
Also, I need the changes to be updated in all iparts, whereas at the moment the Adjust only seems to affect each one. Again, much less limited, but I need the option to update all at once too.
View 5 Replies
View Related
