AutoCAD Inventor :: Wrapping Projected Curve To A Surface
May 1, 2012Having trouble Wrapping projected curve to a surface of a cylindrical solid to make a barrel cam,
View 2 Replies
ADVERTISEMENT
AutoCAD Inventor :: Wrapping Text To Surface
Feb 27, 2013I'm attempting to use the "emboss" feature and wrapping the text to the surface of the part.
Attached is the example of the part I am working with. Also attached is the error message I receive after attempting the process. Is there another way to wrap the text about the surface of a "coiled" face?
AutoCad 3D :: Trim One Side Of Circular Surface By Using Projected Line
Nov 21, 2011I am trying to trim one side of a circular surface by using a projected line that forms my trimming line. The original surface is simply a circle that is swept along a path (like a tube/cylinder). When trimming by using the projected line it wants to cut all the way through the surface (i.e. both sides of the tube/cylinder) but I only want it to cut out one side. Is there a way of allowing this or do I create two semi-circular surfaces, therefore only cutting/trimming in effect one side?
View 2 Replies View RelatedAutoCAD Inventor :: Table Wrapping
May 16, 2012Why does the table wrap like this (see attached)?? Shouldn't it place the wrapped rows on the bottom?
View 6 Replies View RelatedAutoCAD Inventor :: Create Hyperbola Curve Using Equation Curve (Autodesk 2013)
Feb 19, 2013I want to draw hyperbola curve whose equation is x^2/a^2 - y^2/b^2=1. May I use equation curve tool to make the above hyperbola.
I have also made a hyperbola curve of aforesaid equation through conventional method on mathematical ground in the past.
AutoCAD Inventor :: Displaying Projected Lines When Using Breaks?
Aug 13, 2012I have a drawing of an assembly and have a sectioned view so as to see the internals. The assembly is very long so I've used 3 breaks to shorten it to fit the page. What I'm wanting to do is create a sketch and project the geometries of several parts so I can fill them in with color. The problem I'm having is when I click the lines I want projected, the lines don't form over the part but form where I assume they would be if there were no breaks on the view. I do this all the time and it works fine, but it's usually with only 1 break. I'm thinking it's the 3 breaks that are causing the problem.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
AutoCAD Inventor :: Extrude All Projected Geometry Automatically?
Feb 7, 2013I have looked thru the forum and didn't see this question anywhere. Many times I have to make mounting holes on large assemblies that have a lot of holes to project and extrude.
Is it possible for the Extrude command to pick all Projected Geometry automatically? If it looked only specifically for only projected geometry? It would save so much time instead of having to pick every single projected geometry hole to extrude.
AutoCAD Inventor :: Remove All Projected Geometry From Sketch
Sep 19, 2013Is there a way to quickly remove all geometric elements that have been projected upon a sketch?
I don't want to remove the constraints that lock them. I want to remove the elements that basically have that constraint.
AutoCAD Inventor :: Projected Geometry Does Not Update Upon Change
Jun 3, 2012I am struggling with projected geometry that is for some reason not updating in sketch when I change sorce element.
I have sketch in ipt file A.ipt
A.ipt is placed in A1.iam.
in A1.iam I create or place B.ipt
in B.ipt I create sketch and project some elements of A.ipt sketch to it.
After any change i sketch in A.ipt file I and up with elements projected to sketch in B.ipt not muchning elements they ware projected from.
I tried I think everything, adaptivity, creating additional points i A1.iam (they update properly but still projection is not updating).
AutoCAD Inventor :: Projected Sketch Geometry Not Updating?
Jan 7, 2013We just upgraded from 2011 to 2013 and we are having SERIOUS problems with our projected sketch geometry in parts not updating. We have only done this about 1.1 million times over the past four years and now every one of our skeleton models we touch is failing to update and causing a whole mess of delays.
I looked through the Application options for sketching and didn't see anything.
AutoCAD Inventor :: Projected Section View Not Aligned In IDW
May 9, 2012It seems that there is a problem with the section view function in Inventor.
The projected section view is not ailgned with the base view.
I assume that the attached screenshot is very clear.
[URL]
AutoCAD Inventor :: Shrink Wrapping Assemblies
Jul 6, 2012What is the best setting for shrink wrapping an assembly?
I've found shrink wrapping it as a surface causes problems with the video card when rotating the model and placing views on a drawing.
AutoCAD Inventor :: Wrapping An Appearance To A Sphere
Oct 6, 2012I've been attempting to create a sphere with an Earth texture, for which I've made a custom appearance with a flattened picture of earth. Instead of wrapping to the sphere, however, the image is mirrored on both sides of the sphere and extremely distorted. I knew wrapping 2D geometry to a sphere was not strictly possible, but is there no way to pull it off with an image?
If not, would something like this be possible in 3DS max?
AutoCAD Inventor :: Geometry Text - Projected Edges Displayed
Sep 27, 2011I am trying to add some text to the face of the part, no issues other than the projected edges are displayed as well, can the projected stuff be hidden?
View 1 Replies View RelatedAutoCAD Inventor :: Projected Geometry Not Updating Between Sketches 2013
Jul 13, 2012projected geometry not updating between sketches in inventor 2013. I hope this will be fixed in 2013 sp1. I have noticed it happening alot when I project a line of another sketch that makes a single point in my new sketch. once the original skecth is changed the second one doesnt update sometimes. It doesnt do this 100 percent of the time just when I need to get stuff done.
Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800
AutoCAD Inventor :: Wrapping Text In Parts List
Feb 7, 2013how to Wrap the text shown here. Obviously the Column labeled "ITEM NO." would be 1, 2 , 3 etc. So I would like that column to be smaller. When I make the column smaller, the wording disappears.
View 1 Replies View RelatedAutoCAD Inventor :: Parts List Wrapping Direction?
Dec 6, 2012When a parts list in an Inventor drawing is wrapped it always takes the bottom portion and kicks it to the left.
Is there a way to kick it to the right? So when you are looking at the BOM it reads such that item 1 is in the first group and not the second.
AutoCAD Inventor :: Projected Geometry In Sketch In IDW - Related To Breaks In View
Apr 12, 2012I'm using Inventor 2012, and experiencing some trouble with certain types of projected geometry that I'm using in a sketch associated with a view in an .IDW file - but only when the view involves a break (or breaks).
I'm generating section views to show the layout of hole details at various axial locations along the part. When placing a section line, I can't "pick up" any appropriate locating geometry from the view. So, after creating the view (using just a vertical section line), I edit the sketch that defines the section line. Project some geometry (the edges of the holes, in the attached example), draw some additional geometry constrained to that, then constrain the section line to that. That works fine; if I move the view around, the section lines stay attached to it. This is what is shown in the attached "before break" picture.
When I apply a break to the drawing, though, the section lines don't follow the changing view. They stay right there, as if the view had not been broken at all. This is what's shown in the attached "after break" picture. Move the view around, and they track with it - but always staying the same "real" distance apart from each other. It is as if that projected geometry were completely ignoring the break.
I observe something similar if I start with an IDW view with one or more breaks, then create a sketch associated with the view. If I project geometry, some of it projects where it should, but other geometry projects elsewhere on the page - as if no breaks were present in the view.
The part I've shown here is something I put together as a simplified example of what I'm observing. The part I'm actually trying to detail is more complicated (many more details), and much longer (so breaks are a requirement to put it on paper).
AutoCad 3D :: Extruding Modeling Operation Error - Lateral Curve Does Not Intersect To Surface
Jan 26, 2012I keep getting this message. I know others have posted about it- but back int 2006 [URL]. The referenced link showing the solution is no longer available.
I read on an archived blog somewhere that is was a glitch in autocad2005. I am running 2010- so I don't get it. I really need to extrude these plines
AutoCAD Inventor :: Cannot Create Radius Dimension On Circular Drawing Curves Projected From Spline Edges
Dec 4, 2011API enhancement/fix in SP1: Cannot create a radius dimension on circular drawing curves projected from spline edges.Does it in some way trying to refer to the issue with nonplanar arcs turning into splines in drawings saved-as AutoCAD .DWG?
View 3 Replies View Related3ds Max :: Crash / Drawing CV Curve On Surface
Oct 9, 2013Finally just got updated to 2014, and I cannot draw a CV curve on a surface. It immediately crashes.
I tried using Direct3D and OpenGL. No dice.
AutoCAD Inventor :: Projected Drawing View Doesn't Show / Design View Rep Don't Update
Sep 27, 2013After upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..
Any workaround regarding disappearing views?
AutoCAD Inventor :: Curved Surface - How To Increase Volume Of Surface At Certain Points Only
Apr 10, 2013how I can add more volume to curved object surface? Say for example I have a plastic cup.You can think of this as cylinder object ,which was the shelled out using the shell tool and then had its base sealed.
Now at certain parts, I would like to increase the thickness and then blend it the rest of the surface(may be chamfer its edges) .
At certain parts on curved surface I would like to add an extra mm, I think if the surface was flat I would just sketch the shape, then extrude it by few mm and smooth the edges by doing a chamfer
But how can this be done on surface that is curved? Or multi curved for edges?
AutoCAD Inventor :: Ribs On Curved Surface / Trimming To Complex Surface
Feb 28, 2013I'm designing a press for a skateboard similar to: Rib Press
I have the board modeled: (see attached)
Now what i want to do is generate those ribs as seen in the picture.
I tried creating a block that intersected with the board and tried to split the rib at the surface, but to no avail. I think the issue has something to do with the curve of the board in two directions, but i can't seem to get it right.
if you are having trouble visualizing what i'm asking about, look at this. I want to be able to figure out the exact shape of those center ribs to print and eventually cut out of wood.
AutoCAD Inventor :: Extend Button Flat Surface Diameter 12.5 Upto Shaped Surface
May 31, 2012It is not possible forme to add the fil because it is to large 1.8MB how can I poste then I like to know if it is possible to extend the button flat surface diameter ø12.5 up to the shaped surface. The result should be a total solid block whit a surface shaped hole.
File last up-date with Autodesk Inventor Professional 2013
AutoCAD Inventor :: Extrude Feature And Select Part Surface For New Sketch - Offset Surface?
Dec 9, 2011I am a beginner when a extrude a feature and select a part surface for new sketch now i want is to offset that surface but i can,t there is + sign with mouse icon and something like fully constrained is written in down the window.
View 9 Replies View RelatedAutoCAD Inventor :: Merge Flat Surface To Circular Surface?
Dec 6, 2012I am trying to merge the gaps left from extruding a flat surface off a circular surface, delete face and heal does not appear to work.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Inventor :: Modify The Sketch From Projected Sketch?
Aug 22, 2012After I create a adaptive part from projected sketch. How to modify the sketch? Please see the part attached.
View 6 Replies View RelatedAutoCAD Inventor :: Projected View From Crop View
Mar 24, 2011I have a Crop View of a IAM and want/need a Projected View of the Crop View. When I select the Crop View as my base and then select try to create a Projected View, I get the whole IAM.
I guess one could use the Section View and eliminate all the items I don't need for my Base View.
IV2014 sp1.2 PDSU / Sim Mech 2014 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 331.82
SpacePilot Pro 3.17.1, 6.17.7, 4.11
AutoCAD Inventor :: Convert Surface To Solid Model / Turn Off Yellow Edges In Surface Model
Mar 4, 2008We received a surface model from a vendor that I have patched up as best I can, it still has one hole that I can find that I haven't been able to fill. Ideally we would like to have a solid model, but I'm running out of time to get this done and the surface model we have would be good enough for our purposes IF I can get the yellow surface tangent lines to turn off or change their color to black.
I've attached a jpg of the surface model with the yellow lines and uploaded the model here: [URL].....
AutoCAD Civil 3D :: Error 607 / Inlet A9 Gutter Capture Curve Is Not A Valid Curve
Dec 31, 2013I have ran an analysis and SSA gave me Error 607 on the report. It says "Inlet A9 gutter capture curve is not a valid curve."
A couple things I did different from the video lectures...
I selected user define for the Tc to figure out Q. i computed those manually.
For the Inlets I have selected Maximum Capture Cutoff.
There are some inlets in this model I created that do not capture 100% of the flow so i created conveyance links to account for the bypass flow.Not sure why is not recognizing the Curve?
