Is there a way to quickly remove all geometric elements that have been projected upon a sketch?
I don't want to remove the constraints that lock them. I want to remove the elements that basically have that constraint.
We just upgraded from 2011 to 2013 and we are having SERIOUS problems with our projected sketch geometry in parts not updating. We have only done this about 1.1 million times over the past four years and now every one of our skeleton models we touch is failing to update and causing a whole mess of delays.
I looked through the Application options for sketching and didn't see anything.
I'm using Inventor 2012, and experiencing some trouble with certain types of projected geometry that I'm using in a sketch associated with a view in an .IDW file - but only when the view involves a break (or breaks).
I'm generating section views to show the layout of hole details at various axial locations along the part. When placing a section line, I can't "pick up" any appropriate locating geometry from the view. So, after creating the view (using just a vertical section line), I edit the sketch that defines the section line. Project some geometry (the edges of the holes, in the attached example), draw some additional geometry constrained to that, then constrain the section line to that. That works fine; if I move the view around, the section lines stay attached to it. This is what is shown in the attached "before break" picture.
When I apply a break to the drawing, though, the section lines don't follow the changing view. They stay right there, as if the view had not been broken at all. This is what's shown in the attached "after break" picture. Move the view around, and they track with it - but always staying the same "real" distance apart from each other. It is as if that projected geometry were completely ignoring the break.
I observe something similar if I start with an IDW view with one or more breaks, then create a sketch associated with the view. If I project geometry, some of it projects where it should, but other geometry projects elsewhere on the page - as if no breaks were present in the view.
The part I've shown here is something I put together as a simplified example of what I'm observing. The part I'm actually trying to detail is more complicated (many more details), and much longer (so breaks are a requirement to put it on paper).
After I create a adaptive part from projected sketch. How to modify the sketch? Please see the part attached.
View 6 Replies View RelatedI have looked thru the forum and didn't see this question anywhere. Many times I have to make mounting holes on large assemblies that have a lot of holes to project and extrude.
Is it possible for the Extrude command to pick all Projected Geometry automatically? If it looked only specifically for only projected geometry? It would save so much time instead of having to pick every single projected geometry hole to extrude.
I am struggling with projected geometry that is for some reason not updating in sketch when I change sorce element.
I have sketch in ipt file A.ipt
A.ipt is placed in A1.iam.
in A1.iam I create or place B.ipt
in B.ipt I create sketch and project some elements of A.ipt sketch to it.
After any change i sketch in A.ipt file I and up with elements projected to sketch in B.ipt not muchning elements they ware projected from.
I tried I think everything, adaptivity, creating additional points i A1.iam (they update properly but still projection is not updating).
I am trying to add some text to the face of the part, no issues other than the projected edges are displayed as well, can the projected stuff be hidden?
View 1 Replies View Relatedprojected geometry not updating between sketches in inventor 2013. I hope this will be fixed in 2013 sp1. I have noticed it happening alot when I project a line of another sketch that makes a single point in my new sketch. once the original skecth is changed the second one doesnt update sometimes. It doesnt do this 100 percent of the time just when I need to get stuff done.
Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800
Trim/ extend sketch geometry dynamically doesn't work with construction lines?
View 1 Replies View RelatedI have an existing sketch and a new sketch onto which I want to project some lines from the existing sketch.
The panes of both sketches do not run parrallel.
Normally a projection is created by imaginary projection lines from the existing sketch to the new sketch perpendicular to the new sketch.
But now and want to project the existing sketch with imaginary projection lines that are perpendicular to the existing sketch.
Is there a way to hide project geometry from model sketch? I am modeling a sheetmetal part where I need to sketch centermaks, part number etc. for laser cutting. I want to use xy planes for symmetry reasons when sketching, but I don't want them to appear in dxf. This is a problem if I create a dxf directly from the model.
Usually I create dxf files from drawing by adding new sheet where I create flat pattern view from the spesific part (excluding machinigs etc, only thermal cut boundaries visible). In the drawing I am allso able to show model sketches and hide unwanted project geometry. Is it possible to include these sketches to dxf?
In an assembly document, if you want to project a sketch from one part into another, you go through these steps:
- select the part
- edit the part
- create a 2D sketch
- select the plane
- select project geometry
- select the sketch in the other part
- finish sketch
This creates a reference to the original sketch, so if I move the original sketch the new sketch will also move when I hit Assemble.
I am trying to do the same through the API, so I create a proxy for the original sketch and a proxy for the new sketch. I then use the AddByProjectingEntity method on the new sketch proxy passing the original sketch proxy.
This works for projecting the sketch, but it doesn't create the reference, so if I move the original sketch the new one doesn't move, even if I hit Assemble. How to create this link between the two sketches?
I wish to delete all project geometry in the active drawingsketch with 1 click
But unsure how to get to these constraints.
Are these geometricConstraints?
What I have now doesnt work:
Select Case ThisDoc.Document.DocumentType
Case 12292:
Case Else: MsgBox("Current Document not a drawing document")
Exit Sub
End Select
[Code] .......
I am unable to select Sketch geometry via a crossing window to project to a new sketch.
While in the new sketch if I select " Project Geometry " I am only able to select one line at a time. quite tedious for some of my larger projects.
I can not honestly say that this feature was available in previous releases but it seems to me it was. Am I missing a variable somewhere?
"Path has discontinuous segments. Use Edit Sketch to change the path geometry"
View 5 Replies View RelatedCan we now toggle "sketch only" geometry when creating drawing view sketch transient geometry in the Inventor 2012 API?
View 2 Replies View RelatedI am using projected and sketched geometry (2D sketches) in assembly space to create lines/ points that I intend to use to define planes and axes. The problem I have is that nearly all the geometry I create (lines and points in 2D sketches) is not "selectable" when I try to create planes or axes. I cannot even put a work points "on top of" my sketch points. Why are my sketches not usable in the assembly space? Since the components in my model are just two extruded rings I don't have any linear edges I can select to make this work/ define planes.
View 9 Replies View Relatedis there a method to project the sketch onto the part so that i can then remove 2mm of that shape from the part....?
Inventor 2013 & Inventor 2014 (work)
I have a basic problem but I can't seem to be able to get around it. I added an image to a sketch successfully but it cam with a yellow line around it (see attached) and I can't remove it. In the sketch properties I was able to change it's color to black to make less visible but it's still there.
Any clue as to how I can make it disappear ?
I am trying to export geometry found in a flat pattern sketch overlaid onto the flat pattern.
Since I am creating the output file manually I gather the flat pattern boundaries and bend center lines for output to a file.
When I add flat pattern sketch entities to the mix they do not overlay properly. What matrix would I have to push the sketch entities through to get them to the same coordinates as the flat pattern?
I have a drawing of an assembly and have a sectioned view so as to see the internals. The assembly is very long so I've used 3 breaks to shorten it to fit the page. What I'm wanting to do is create a sketch and project the geometries of several parts so I can fill them in with color. The problem I'm having is when I click the lines I want projected, the lines don't form over the part but form where I assume they would be if there were no breaks on the view. I do this all the time and it works fine, but it's usually with only 1 break. I'm thinking it's the 3 breaks that are causing the problem.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
Having trouble Wrapping projected curve to a surface of a cylindrical solid to make a barrel cam,
View 2 Replies View RelatedIt seems that there is a problem with the section view function in Inventor.
The projected section view is not ailgned with the base view.
I assume that the attached screenshot is very clear.
[URL]
I've created a shared sketch and have used it with various features. Sometime those features are suppressed. The model works fine but the shared sketch generates a sketch doctor error because the feature that created it has been suppressed. Is there anyway to make the sketch suppressed so it doesn't trigger a sketch doctor error? Inventor 2013
View 2 Replies View RelatedHow do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
I was trying to query some sketch points data from a profile Path using code as below. However the program stopped without telling the reason.
Code below:
i = 0;
foreach (ProfileEntity oSourceProfileEntity in oProfilePath) { switch (oProfilePath[i].SketchEntity.Type) { case ObjectTypeEnum.kSketchArcObject: { SketchArc srcSkArc = default(SketchArc); srcSkArc = (SketchArc) oSourceProfileEntity.SketchEntity; // error points[i] = srcSkArc.StartSketchPoint.Geometry; break; } default: { SketchLine srcSkLine = default(SketchLine); srcSkLine =(SketchLine) oProfilePath[i].SketchEntity; // error points[i] = srcSkLine.StartSketchPoint.Geometry; break; } } i++; }
First we imported an ".igs" file to inventor, which produced "wires". Then by promoting the wires it produced a 3-d sketch.
The model is in one plane and 2-D, and we are trying to use Ansys 2-D analysis, but in-order to do so it needs to be in a 2-D sketch.
The model is too large to be redrawn on a 2-D plane, how to convert it to a 2-D sketch
want to change sketch 2013 into the sketch of 2010
View 1 Replies View RelatedWhen I edit certain sketched some other sketches disappear. see attached.
This is causing modelling to slow down as I can not project lines from the sketch that has disappeared.
what is the difference between a sketch and a planar sketch?
View 2 Replies View RelatedAPI enhancement/fix in SP1: Cannot create a radius dimension on circular drawing curves projected from spline edges.Does it in some way trying to refer to the issue with nonplanar arcs turning into splines in drawings saved-as AutoCAD .DWG?
View 3 Replies View Related