AutoCAD Inventor :: Table Wrapping
May 16, 2012Why does the table wrap like this (see attached)?? Shouldn't it place the wrapped rows on the bottom?
View 6 Replies
ADVERTISEMENT
AutoCAD Inventor :: Shrink Wrapping Assemblies
Jul 6, 2012What is the best setting for shrink wrapping an assembly?
I've found shrink wrapping it as a surface causes problems with the video card when rotating the model and placing views on a drawing.
AutoCAD Inventor :: Wrapping Text To Surface
Feb 27, 2013I'm attempting to use the "emboss" feature and wrapping the text to the surface of the part.
Attached is the example of the part I am working with. Also attached is the error message I receive after attempting the process. Is there another way to wrap the text about the surface of a "coiled" face?
AutoCAD Inventor :: Wrapping An Appearance To A Sphere
Oct 6, 2012I've been attempting to create a sphere with an Earth texture, for which I've made a custom appearance with a flattened picture of earth. Instead of wrapping to the sphere, however, the image is mirrored on both sides of the sphere and extremely distorted. I knew wrapping 2D geometry to a sphere was not strictly possible, but is there no way to pull it off with an image?
If not, would something like this be possible in 3DS max?
AutoCAD Inventor :: Wrapping Text In Parts List
Feb 7, 2013how to Wrap the text shown here. Obviously the Column labeled "ITEM NO." would be 1, 2 , 3 etc. So I would like that column to be smaller. When I make the column smaller, the wording disappears.
View 1 Replies View RelatedAutoCAD Inventor :: Parts List Wrapping Direction?
Dec 6, 2012When a parts list in an Inventor drawing is wrapped it always takes the bottom portion and kicks it to the left.
Is there a way to kick it to the right? So when you are looking at the BOM it reads such that item 1 is in the first group and not the second.
AutoCAD Inventor :: Wrapping Projected Curve To A Surface
May 1, 2012Having trouble Wrapping projected curve to a surface of a cylindrical solid to make a barrel cam,
View 2 Replies View RelatedAutoCAD Inventor :: Bend Table Error / Angle Or Radius Are Outside Table Boundaries
Mar 15, 2012The angle or radius are outside the table boundaries. I have used bend tables before and have not run into this. See screenshot. What I don't understand is that in the error dialog box the Thickness is correct the Radii are correct and the Angle is correct except it is showing a -90 degrees. Is that the problem? The negetive? Why is it showing a negative number. I can't change the way the part is formed. The problem seems to be with the lower left hand curl. It does go ahead and flatten it, but I don't trust the results when I have the three errors.
View 1 Replies View RelatedAutoCAD Inventor :: Table Driven IFeatures In A Hole Table?
Oct 16, 2013I have a part where I have placed a number of table driven iFeatures. These features generate parameters in the model that I can see in the parameter table. I am trying to find a way to have these iFeature parameters show up in the hole table in my drawing.
By 'exporting' the parameters, I have been able to get the values to show in notes and drawing view labels but I can't find a way to add them as a 'New Property' in my hole table.
AutoCAD Inventor :: Inventor Hole Table - Mixed Units - Description Cell
Dec 18, 2013Is there a way in the description field of an Inventor hole table to have mixed units? Some hole sizes at fractions, some at 2 plc, and others at 3 places.
Inventor Pro 2013 or 14
AutoCAD 2010 :: Explode Excel Table But Keep Table-layout And Texts
Mar 14, 2013In our company, we put Excel tables in our drawings. The reason we've chosen for Excel-tables is that we can adjust the layout of the table quite easily. These tables consist of grouped cells in a particular company-specific layout. We select the range of the desired cells, copy and paste them in our AutoCAD drawing. This drawing is sent to our customers. The disadvantage of this method is, that when our customers (who use CAD-software of other brands) open the dwg, they don't see the table, but some kind of picture of the table.
Is there a way to 'explode' the excel-table, but keep the specific layout of the table? For attributes in blocks there's the 'Explode Attributes'-command in the Express-tools, but is there something similar for Excel-tables?
Product Design Suite 2014
Inventor 2012 SP2, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
AutoCAD Civil 3D :: Force Table And Table Text Height To Stay Constant Despite The Scale?
Feb 23, 2012Is there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
AutoCAD Map 3D :: Join Access Table To SHP File Attribute Table?
Dec 9, 2011Having an issue trying to join an access table to a shp file attribute table. I want to use the access table to cross reference the shp file for matching parcel numbers. I have attached the access table in the ODBC using a data source name however it seems to not give me the option to view any records.
View 2 Replies View RelatedAutoCAD 2010 :: Multiline Boundary Not Wrapping Text?
Feb 12, 2013I am trying to create an attribute with multi-text and I am unable to get the text to wrap. I have the boundary width option checked and specified, but the text doesnt seem to care and keeps right on going....
View 4 Replies View RelatedAutoCAD Civil 3D :: Table To Table Link On Different Layouts
Feb 18, 2013I want to know if you can link AutoCad tables to other Autocad tables on different layouts. Say I have ten sheets, each with a table for quantities of pipe length, and one sheet with a total of all quantities. Can I link cells from each separate layout sheet to the main table sheet, so that I can add them all for project totals?
View 3 Replies View RelatedAutoCAD Map 3D :: Use Table Object To Display Linked Table
Nov 20, 2012I am wanting to use an Autocad table object to display fields from an Access database table that is linked to symbols in my drawing.
My objective is create a database table that has detailed notes for call outs in my drawings and then link my call out blocks to the database table and display the blocks and linked descriptions in an Autocad table. If the notes in the database table are edited the Autocad table updates with the new the description from the database.
AutoCad :: Export Excel Table Not As OLE Object But As A Table?
Dec 13, 2013How can I export a excel table to Autocad not as an OLE object but as a Audocad table?
View 7 Replies View RelatedAutoCAD Inventor :: Delete Revision Table
May 6, 2013I'm simply trying to delete the revision table if it exists on a drawing. I did find where you can't do anything with Rev Tags with the API, but what about the Actual Revision Table?
Trying to get this to work;
If iProperties.Value("Project", "Revision Number")>0Dim oRevTable as RevisionTableoRevTable = ActiveSheet.Sheet.RevisionTable.Item(1) oRevTable = nullRevisionTable
AutoCAD Inventor :: Can Split A Revision Table
Oct 11, 2011I 'd like to keep the old Revision table rows available , but off the sheet rather than delete all the rows & start from , let's say, Rev 10.Is this possible in 2012?
Inventor Suite 2013 Ultimate
AutoCAD Inventor :: Add Appearance Tab To IPart Table?
May 31, 2013Is it possible to add a Appearance tab to a Ipart table? I am cataloging a set of parts and one part is made with steel but in Gloss - Black and Matte - Black and i'd like to differentiate the 2 without haveing to make 2 seperate Ipart files.
View 2 Replies View RelatedAutoCAD Inventor :: Coordinate Table On Drawing
Jun 25, 2010I have created some reference points on a part. I have a need to include a table on the drawing of this part that shows the x,y,z coordinate positions of each of those points relative to the coordinate system origin. I have been trying to figure out a way to extract this information from the part to create source data to place into a table on the drawing.
View 3 Replies View RelatedAutoCAD Inventor :: IAssembly / Table Replace
Aug 12, 2009I am creating an iAssembly with iParts. Some of the iParts have the "Table Replace" colum option and some do not. Both iParts have tables with members and part numbers. See pic.
View 3 Replies View RelatedAutoCAD Inventor :: Hole Table Dimension
Apr 23, 2012I have a drawing of a sheet metal part that I did late last year. I used a Hole Table to dimension all the holes.
Fastforward to today. I added two holes that are different in size than any other hole. So when I opened the drawing it automatically added them to the Hole Table and gave them tag #'s in a new group and it kept the grouping in Alpha order. A, B, C were there before and it added D. Great, that's the way to do it.
Then I decided I needed to change the hole size. The change would keep the size different than any other hole on the part still. I go into the drawing and it change the size in the Table BUT, it also moved them up to the top of the list but kept the tag # as D*.
How do I get those two entries back to the bottom where they belong to keep them in order?
AutoCAD Inventor :: Expression In IPart Table
Nov 27, 2011Having this issue with IE9? I have a table driven iPart that has an expression in the description field. The expression is =PL <THICK> x <WIDTH>, so that as the thickness and width change the description of this plate also changes. I have recently added rows to this part for the use of bar instead of plate on certain shapes. In order for the bar description to match standard steel shape nomenclature the expression on these parts needs to be =BAR <WIDTH> x <THICK>. How can I add the description to the iPart table so that I can simply edit the bar parts to be as needed?
Some things to note:
1.) These are custom iParts so when the item is inserted you select the thickness, file name, save location, etc.
2.) There are about 705 lines to this iPart right now and I would prefer not to go higher.
3.) I would like to keep these as the same iPart instead of having two different files.
4.) I need the description to be an expression because long after these parts are placed, they sometimes change and I need the dimensions to update after the fact like all our other parts (so don't forget that these one won't and then the drawings are incorrect).
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
AutoCAD Inventor :: Set Revision Table Row To Static - Add Row
Aug 28, 2013I have never attempted any i-logic before and this may be running before I can walk, but I was wondering if this premise even sounded do-able. I would like to create a rule to set the last row of my revision table to all static values, and then add a row.
View 5 Replies View RelatedAutoCAD Inventor :: Inserting Symbols Into A Table
May 10, 2011Is it possible to insert symbols into a table in Inventor 2011? I have a table set up that handles tabulated dimensions, and I need to be able to insert symbols, such as diameters, degree marks, +/-, etc.
View 4 Replies View RelatedAutoCAD Inventor :: Working With Table IPart
May 18, 2012I am using the VBA need to replace the contents of table cells in columns iPart MemberName PartNumber. By what teams can do this?
View 1 Replies View RelatedAutoCAD Inventor :: Insert Table Into IAM Without IAssembly
Dec 5, 2013Is there any way to insert a generic table into an assembly file. I don't want to create an iAssembly or use the data to configure the component in any way. I would just like to be able to maintain some design related information within the assembly file, similar to the tables that you can create in an idw. A table just like the iAssembly table would be fine, minus the iAssembly part or any sense of configuration.
View 4 Replies View RelatedAutoCAD Inventor :: Table Wrap Text
Feb 20, 2008How can you get the header text in a table to wrap to the next line?
View 3 Replies View RelatedAutoCAD Inventor :: Revision Table Not Update By VBA?
Dec 3, 2012I tried to add a revision table by vba routie. useing fllowing code
Dim oRevStyle As RevisionTableStyle
Set oRevStyle = oDoc.StylesManager.RevisionTableStyles.Item("Revision Table_NEW")
Dim oRevTable As RevisionTable
Set oRevTable = oDoc.ActiveSheet.RevisionTables.Add2(oPoint, , , , , oRevStyle)
It adds revision table is not shown correct in the drawing. I have to manually select certain style in the drawing.
I try doc.update or view.update. it doesnt work.
Autodesk Inventor Professional 2014
Autodesk Product Design Suite Standard 2013
Microsoft Office 2007 & 2013
Windows 7 64bit
Synergis Adept 2013
Visual Studio Express 2010
AutoCAD Inventor :: Family Table And Vault
Dec 6, 2013I have completed a part file with a family table defined in it. I check this part into vault. When I search for this part in vault it seems like it has taken the part number and the description from the first line in the family table and assigned it to the main part file. To me this is confusing because it looks like there are two items that are the same.
View 2 Replies View Related
