AutoCAD Inventor :: Table Wrap Text
Feb 20, 2008How can you get the header text in a table to wrap to the next line?
View 3 RepliesHow can you get the header text in a table to wrap to the next line?
View 3 RepliesCan you set up word wrap in a table's column headers?
View 4 Replies View RelatedHow do you word wrap leader text?
View 6 Replies View RelatedaIs there a way to Format the Column Header to wrap text & rotate text if necessary? I would prefer if I could only Format the QTY Column Headers, but leave the others s is.
View 2 Replies View RelatedI want to engrave the text 'TEST' all the way around this clonal object. When I use the emboss tool, selecting the option 'wrap to face,' it gives me an error message that the "face selected is not tangent to the profile plane."
I am using a work plane that is offset from the XY plane. I included a screen shot and the file that I am using (Inv. 2014)
I am looking for assitance with the VB code to change the text style within a custom table when it is created from a VB standalone program. I am using Inventor 2013 and VB 2010 Express.
I have a customtable that is created within a .idw, and I would like to have the data cells set to "Table_Cells" style that I have created. I cannot find anything in the help file with a sample code to build off.
I figure it's got to be something with oCustomTable.DataTextStyle but beyond that I am lost.This is what I have, and VB is kicking it back in my face.
Dim oTextStyle As TextStyleoTextStyle = oCustomTable.DataTextStyle.StyleType("Table_Cells")
Error 2 'Public ReadOnly Property StyleType As Inventor.StyleTypeEnum' has no parameters and its return type cannot be indexed.
When I click on an object to retrieve it's extended data, the data keeps writing to the right, it does not return to the next line, when the text approaches the end of the screen. Very difficult to analyze information.
View 4 Replies View RelatedIs there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
I am using VB.net to generate a custom table in my .idw files to make a plot stamp. The table is showing up, however, the text is garbled. When you open the .idw, the table properties show the text correctly but the display is coming out messed up. I have attached a picture of what each looks like. I moved the table off the sheet for clarity.
The
Public Sub PlotStamp()
Dim oDrawDoc As DrawingDocument
oDrawDoc = _invApp.ActiveDocument
Dim oInvSheet As Sheet
oInvSheet = oDrawDoc.ActiveSheet
Dim oTitles_Plot(0) As String
oTitles_Plot(0) = CurrentFilename
[Code]...
When I click on an object to retrieve it's extended data, the data keeps writing to the right, it does not return to the next line, when the text approches the end of the screen.
View 2 Replies View RelatedI have designed a C# application to To Print I Cards Of School. Here I am sending data from my application to a CDR FILE (Already Created ) Which Contains ADDRESS Text Field..Now I Need to Print Address(which contains 60 characters or more) on this Text field .
I Have Used The following c# Code.. To Replace Address text field that contains text 'Address '.....
s.Text.Replace('Address',"Text To be replaced .......")...here s is Active shape...
This Works Fine But How can i WRAP TEXT....of Address field.
I'm trying to change the value in the description column through the formattedtext but the final result is not what is supposed to be, this is a part of my code.
Sub HoleTab()Set oDrwDoc = ThisApplication.ActiveDocumentDim oSheet As SheetDim i As IntegerSet oSheet = oDrwDoc.ActiveSheetDim oHoleTables As HoleTablesSet oHoleTables = oSheet.HoleTablesDim oTable As HoleTableDim oTableRow As HoleTableRowDim oTableRows
[Code] .......
In the column Description from a I-assembly table I will place the text Test<200. Than I get a error message "Detected potentially damaging errors in the table. Unable to interpret cel: " ". It goes wrong with this symbol <. How do i get this symbol normal as a text in this column?
View 5 Replies View RelatedThe angle or radius are outside the table boundaries. I have used bend tables before and have not run into this. See screenshot. What I don't understand is that in the error dialog box the Thickness is correct the Radii are correct and the Angle is correct except it is showing a -90 degrees. Is that the problem? The negetive? Why is it showing a negative number. I can't change the way the part is formed. The problem seems to be with the lower left hand curl. It does go ahead and flatten it, but I don't trust the results when I have the three errors.
View 1 Replies View RelatedI have a part where I have placed a number of table driven iFeatures. These features generate parameters in the model that I can see in the parameter table. I am trying to find a way to have these iFeature parameters show up in the hole table in my drawing.
By 'exporting' the parameters, I have been able to get the values to show in notes and drawing view labels but I can't find a way to add them as a 'New Property' in my hole table.
Is there a way to setup vertical alignment of text in a cell for the entire table, when using Table Tool? It is possible for a single cell, but when selecting a table (or multiple cells) this option is not available.
View 5 Replies View RelatedI am setting a book in Indesign CS2.I use "Text frame options" > align > justify on all my pages. On a page that was so justified, I inserted a picture using the "text wrap". Soon as I did, the text stopped being aligned along the foot of the page (which looks rotten, because the facing page is justified and so the spread is now no longer aligned.
I tried to I use "Text frame options" > align > justify again, but now the option to align is now greyed out.
Is there a way to force text pulled from a drawing property to wrap to fit a cell of Mtext? In otherwords,... a multi line field? Some of our drawing titles are several lines, and instead of wrapping inside the field box in our titleblock, the text just spreads out all over. I'd rather not go back to the old method of having a custom property for Line 1, Line 2 etc....
Acad 2011
I have always struggled with AutoCAD's text masking. I love the masking ability which makes drawings that are clean looking and easier to read. My issue is with the way the mask border is created. The mask creates a rectangular border that does not "shrink wrap" around the text. This can lead to masking more text than originally intended.
I am looking for a quick and easy way to wrap the mask around text. Right now the only way to accomplish the desired result is to explode the text into single lines and then mask each individual line. This creates issues with leaders and is a more time consuming process.
I'm Trying to Wrap Text Around a Coin, I've searched A lot of the Tutes, but Found that Not one, up to now, has Wrapped text around anything? Do I need a Plugin? Or Am I just Too Brand new?
View 3 Replies View RelatedFirst I am a new user of InDesign so it might just be me. I am trying to use text wrap and it works fine with a text box. When I try to do the same thing on another page with a link text, text wrap does not work.
View 2 Replies View RelatedI've got a template with a set of Object defaults for an Inch drawing and a set for a Metric drawing. I've just noticed that within my metric set, if I insert a hole table with tapped holes, the font on the tapped holes doesn't match the other hole types. I'm searched around, but all the settings for the hole table style reference the same text style. (Please see the attached image.)
So is there a way to set a certain hole type to have a certain font or size within a hole table? Because if there is, I'd obviously like to remove it..... But I can't seem to figure out where the issue is.
if the command line is docked and you hit F2 to bring up the text screen,
there is no word wrap.
e.g.
type (entget (car (entsel))) pick an object, and then F2 for text screen.
The result is all on one line and you can only view it by scrolling sideways.
The same happens when you list a few lines of Mtext.
If the command line is not docked there is no problem.
My text will not wrap around a map that I have created in CorelDraw. The map consists of lines (depicting roads, streams, and railroads that were drawn using the freehand pen) and place names and titles. In both contour and square wrap settings, the text box only recognizes the text objects on the map and ignores all the line objects. I have grouped everything on the map and it shows as one object. Is there a simple solution so that my text will properly wrap around the map. This problem is holding up my publication schedule!
View 7 Replies View Relatedi need to put some perspective into my text, but i have no idea how to do it. the image i have is a wall from an angle. i need to know how to make the text look like it is on the face of the wall. any ideas?
if there are not to clear, post a reply and i will try to scan the image with what i want drawn on it and then upload it here.
I have a an image and i want to wrap text around it to form a love heart shape similar to this image: URL....Is it possible to do this in bespoke/manual way, or is it a case of using various degrees of the arc functionality?
View 2 Replies View RelatedI am attempting to do a text wrap in Illustrator. Everything is on one layer. Both items I wish to wrap text around are above the text itself. The text is actually the bottom component in the layer. Each of the two items is a graphic with text and each is grouped prior to asking it to wrap text. The text wraps just fine around one item, but will not wrap around the second item. I earlier had created a very similar file and the text wrapped fine around both items, so I know it can. But it doesn't want to in this instance.
View 5 Replies View RelatedMy text won't wrap around the bounding box of my object in CS6.
View 3 Replies View RelatedI have a part that was sent to me from a vendor. It was a large 80MB part so I put it in an assembly file and shrinkwrapped it to reduce the size of it. Now it is transparent and I can not figure out how to turn it off.
View 8 Replies View RelatedThe attached is a jpeg of an InDesign file. I have the image of the guy that has text wrap around him and would like fake that in Photoshop. Is that possible?
View 2 Replies View RelatedHow can I make letters wrap around others like this picture? All I have are photoshop and indesign, no illustrator.
View 5 Replies View Related