AutoCAD Inventor :: Fillet Edges Of The Designs - Try Again With Small Radius
Sep 7, 2011I am trying real hard to fillet the edges of these designs but it keeps saying try again with a smaller radius.
View 5 Replies
ADVERTISEMENT
AutoCad :: Fillet With A Radius
Nov 12, 2012I'm having a problem with the fillet command using a radius, I can't seem to get a rounded corner. I have the radius set at 1.00. I should see a rounded corner. If I set it at 0.00 or 1.00. I get the same result. Something doesn't seem right! Could it be a setting.
I viewed a few videos on Youtube and I can't replicate the same filet with radius results. I watched one that you can select radius by right clicking mouse. A text box appears to the right of the cross hair cursor where you can input the radius. On my screen that does not come up.
AutoCAD .NET :: Fillet Two Lines With Radius
Dec 23, 2013I need to fillet below lines in .net...Iam having the entities list..How to fillet those lines with radius using .net?
View 2 Replies View RelatedAutoCAD LT :: Put FILLET Radius In Polyline?
Jul 26, 2005Is there a way to put a FILLET radius in a polyline? (2D dwg)
e.g. a straight line crosses a radius, both lines trimmed off, turned into a polyline and joined using PEDIT.
When I try to put a FILLET radius between the straight line and the original radius, the command line quotes;`Cannot fillet polyline arc segements'
AutoCad 3D :: Put 5 Mm Radius Fillet On Upper Edge?
Jan 15, 2013I want to put a 5 mm radius fillet on the upper edge. After 1.5 mm it will not...Why? What can I do? Convert it to a mesh object? Or?
View 9 Replies View RelatedAutoCAD 2010 :: Fillet Radius Defaulted Back To 0
Jan 22, 2013If I define the fillet radius in a drawing and close the drawing, then next time I open the drawing, the fillet radius has defaulted back to 0 and I have to redefine it again. Is there a way to maintain the fillet radius in a drawing so that I do not have to redefine it every time I open the drawing?
View 3 Replies View RelatedAutoCAD Civil 3D :: Polyline Offset Adds A Radius Fillet?
Apr 15, 2013What settings has changed to make any polyline I offset to add a radius fillet to it. See attachment
Civil 3D 2013 (SP1)
Dell T3500
Win 7 Pro X64
Intel Xeon 3.2 GHz
24 GB ram
NVIDIA Quadro 4000
AutoCAD Inventor :: Cannot Create Radius Dimension On Circular Drawing Curves Projected From Spline Edges
Dec 4, 2011API enhancement/fix in SP1: Cannot create a radius dimension on circular drawing curves projected from spline edges.Does it in some way trying to refer to the issue with nonplanar arcs turning into splines in drawings saved-as AutoCAD .DWG?
View 3 Replies View RelatedPhotoshop :: Small Pattern Designs
Mar 22, 2009I have attatched an image of what I am trying to accomplish. It's a small image which is repeated horizontally to create a footer. I want to know how to create these small designs.
View 2 Replies View Related3ds Max Modeling :: How To Get Radius / Fillet Where 2 Pipes Intersect
Feb 8, 2013When joining 2 pipes (cylinders) how do you get a radius/fillet where the 2 pipes intersect? How can you control the radius size? Attached is a 2010 version and 2013 version MAX file. piperadius.zip
View 2 Replies View RelatedAutoCAD 2013 :: Fillet Edges Faster Than Rhino
Apr 23, 2013I use Rhino to make pendant models but I find that Rhino's fillet function very slow and inefficient, so I'd like to know if Autodesk would be better at doing that.
View 9 Replies View RelatedCorelDRAW X5 :: Website Logo Designs Have Jagged Edges / Look - How To Make Smooth
Apr 3, 2012Using X% and trying to make some website logo designs but all the letters etc do not look nice and smooth on the site.
I make the logo full size and shrink it then save for web but when I import to the site program and publish the site the logo looks ragged.
the logo in question is the top right side image at [URL] .....
I have tried lots of different design ways but still looks crummy.
3ds Max Modeling :: How To Accurately Fillet The Edges Of The Cube
May 5, 2011Say I have an editable patch cube. Is there a way to accurately Fillet the edges of the cube while it's a patch?
I need to use patch modeling so I can convert to nurbs for IGES export. I really don't want to convert to an editable poly at any point in the process because it adds so many extra patches when I convert it back.
Photoshop :: CS2 Rounded Edges Tool-adjust Radius AFTER Its Been Drawn?
Jan 1, 2006how to set the radius of a rounded edges box BEFORE I draw it, but I can't find how to adjust it AFTER I draw it!
View 3 Replies View RelatedAutoCAD Inventor :: Using Optimization For Checking Designs
May 27, 2012I am not fully conversant with the optimization function however I have leaned that this can be used for checking FEA tests on designs.
View 4 Replies View RelatedAutoCAD Inventor :: How To View Designs Created By Publisher
Nov 15, 2011My supervisor needs to view the autodesk inventor designs (I create) in his PC without installing the whole inventor package. Its something like using eDrawings to view designs created with solidworks.
View 3 Replies View RelatedAutoCAD Inventor :: Convert Designs Into ADSK File To Use As BIM Info
Dec 2, 2011Ok, so I understand how to take my Inventor designs and make them into a .adsk file for use as BiM info. Without having revit how in the world am I supposed to check what I'm sending out to my clients? It goes against everything I've ever learned to just make a file and send it out blindly without checking it.
Is this really how Autodesk thinks this process should work?
AutoCAD Inventor :: Edge Won't Fillet
Feb 19, 2012I have remodeled a part I was working on previously, but now an edge doesn't want to fillet, as it was on the old model ( in the top right corner )..
View 2 Replies View RelatedAutoCAD Inventor :: Fillet Connecting Wrong
Oct 11, 2013I am working on my project at home and I am having some problems with the fillet tool.
Attached is a picture of my problem with what it is doing.
I am trying to fillet A to E and E to C (B to D and D to F also)
On the left hand side when I fillet, it connects C to E instead of A to C and I do not know why it is doing that or what I am doing wrong.
AutoCAD Inventor :: How To Make 3 Mm Fillet In Other Direction
Dec 7, 2011How do i make the 3mm fillet go in the other direction.When i apply the fillets to the top of the pipes it goes inwards but i want the fillet to go outwards.(like a weld - i don`t want to weld though just use a fillet).
View 1 Replies View RelatedAutoCAD Inventor :: Fillet Weld Around Corners
Mar 14, 2012Is there a way to create smooth transitions for fillet welds for around corners?I have to create four separate fillet welds on all sides of the mating pieces and it breaks at the corners.
View 2 Replies View RelatedAutoCAD Inventor :: Fillet In Eccentric Reducer?
Sep 23, 2013What kind of fillet i need for relax the edges in a eccentric reducer pipes's fitting, i can use fillet of faces for the sircular edge smaller , but am in troubles with the bigger .
View 1 Replies View RelatedAutoCAD Inventor :: Fillet Line Highlight In Drawings
May 6, 2013I have a little issue with drawings where I cannot find out how to highlight fillet edges on the models. I dare say I am missing some simple setup option.
The picture attached shows what I mean. The left is how the model looks in drawing mode and on the right is how I would like it to look (taken from the modelling environment).
AutoCAD Inventor :: Can Delete Part Of A Fillet Feature
Dec 7, 2011Can you delete part of a fillet feature? While still keeping part of it & adding to it.
I have a fillet feature with 2 fillets to a part. One is in the wrong place.The Feature Fillett1 if you edit it, you will see what I mean.
Keep the middle one. Both fillets are 0.25" / Replace the bottom fillet to the top corner.
I would like to keep the Feature in the order it is in, if possible.
I am using Inventor 2012.
AutoCAD Inventor :: Joining Two Lines (Straight And Fillet)
Apr 16, 2013I have searched the discussion groep and have not came up with any usefull information.
I have an inside web plate sketch that i want to offset but my offset does only do one line at a time.
So my problem basicly is that I want it to do the whole sketch in one click. Is it possible to join all the lines? or is there another function that I do not know of that will do this for me.
Attached is photos of the problem I have
1 picture - How do I join these lines
2 picture - How the whole sketch looks
3 picture - The offset does only do one line at a time (i want it to do the whole sketch)
AutoCAD Inventor :: Fillet A Stitched Solid To A Cylinder
Oct 30, 2011I'm currently modeling a propeller and i want to fillet the base of the blade to the hub but the way i have it will only let me fillet it towards the patched surface on top of the cylinder, what can I do?
I would also like to have the fillet be a large radii on the center and be small at the leading/trailing edges.I just tried posting it but the file I have available now is bigger than the limit and I cant compress it to 1.5 mb, while I get acces to the file on monday:
The blade is comprised of 2 lofted surfaces and patched surfaces to join them and make a closed loop, one of the patched surfaces ''hugs'' the cilinder outer surface (hub), when I try to fillet the it tries to smooth from the lofted surfaces to the patched surface, making the arc to the other side i want it to.
AutoCAD Inventor :: Fillet And Groove Weld Settings?
Sep 14, 2012I have been asked to change some of the default weld settings within the weldment template, i.e. set groove weld to full face full face, set the fillet weld to 6x6. so that when we do a new weldment these things are already set, have hunted high and low on here, through google, autodesk knowledge base for inventor but havent found anything, not sure if havent put the right keywords in or that it just isnt possible to do.
View 2 Replies View RelatedAutoCAD Inventor :: Bend (fillet) Between Two Lines In 3DSketch
Sep 15, 2013I generate 3 points, two lines between point 1,2 and 2,3 and make a bend between the two lines. Cannot do it correctly.
On one side the fillet is not trimmed correctly. I think it is a bug in Inventor. Also when I have the sketch I manually cannot make a decent bend/fillet in the 3D sketch I created.
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click 'add 3d sketchpoints in open partdoc Dim oPartDoc As PartDocument Dim oPartDef As PartComponentDefinition Dim oTG As TransientGeometry oTG = _invApp.TransientGeometry oPartDoc = _invApp.ActiveDocument oPartDef = oPartDoc.ComponentDefinition Dim oSketch As Sketch3D oSketch = oPartDef.Sketches3D.Add() Dim sp1(2) As SketchPoint3D Dim rod(1) As SketchLine3D sp1(0) = oSketch.SketchPoints3D.Add(oTG.CreatePoint(0, 0, 10)) sp1(1) = oSketch.SketchPoints3D.Add(oTG.CreatePoint(0, 0, 0)) sp1(2) = oSketch.SketchPoints3D.Add(oTG.CreatePoint(10, 0, 0)) rod(0) = oSketch.SketchLines3D().AddByTwoPoints(sp1(0).Geometry, sp1(1).Geometry) rod(1) = oSketch.SketchLines3D().AddByTwoPoints(sp1(1).Geometry, sp1(2).Geometry) 'bending it oSketch.SketchArcs3D.AddAsBend(rod(0), rod(1), 2.5) End Sub
The resulting part-file is added, for who wants to try to get a bend with both sides trimmed correctly.
AutoCAD Inventor :: Fillet Part Of A Face Edge?
Sep 20, 2011I need to fillet part on an edge on the top face of the enclosed part, is this possible? I have tried a few things but the fillet command always selects all the edges on the face to fillet.
once selected it says in the selection box that 15 edges are selected, and I can't ctrl click to remove any of them singly, basically it will deselect them all? I have made sure I have loop select off.
AutoCAD Inventor :: How To Change Fillet Sizes With Family Table
Feb 16, 2012i am learning publishing parts to content centre so as to use for frame generator.Success so far except i cannot work out how to change Fillet sizes with the Family Table.As i increase the sizes of beams i want to also control the fillet size within the Family table.Where do i add the fillet parameter?
INV 2012
AutoCAD Inventor :: Show Fillet Welds Between Bar And Curved Surface?
Mar 23, 2012 I need to show fillet welds between the bar and the curved surface. There is a small gap there (3/8" bar against 2 3/4" O.D. tube) and IV and neither groove or fillet weld works. How to show the weld?
I am using IV2009.