AutoCAD 2013 :: Fillet Edges Faster Than Rhino
Apr 23, 2013I use Rhino to make pendant models but I find that Rhino's fillet function very slow and inefficient, so I'd like to know if Autodesk would be better at doing that.
View 9 Replies
ADVERTISEMENT
Maya :: How To Export From 2013 To Rhino
Sep 16, 2012I am trying to export my hair curves from maya 2013 into rhino. I select my curves and try to export the selection and try to export as an .iges file. but maya is giving my an error.
i see that the .iges export is now .iges DCE..
AutoCAD Inventor :: Fillet Edges Of The Designs - Try Again With Small Radius
Sep 7, 2011I am trying real hard to fillet the edges of these designs but it keeps saying try again with a smaller radius.
View 5 Replies View Related3ds Max Modeling :: How To Accurately Fillet The Edges Of The Cube
May 5, 2011Say I have an editable patch cube. Is there a way to accurately Fillet the edges of the cube while it's a patch?
I need to use patch modeling so I can convert to nurbs for IGES export. I really don't want to convert to an editable poly at any point in the process because it adds so many extra patches when I convert it back.
AutoCAD 2013 :: Fillet Dimension Input
Nov 6, 2013I am used to entering my fillet radius dimensions in the command line with [F]illet, [R]adius, then entering a value.
However with 2014 an extra prompt has been added (or enabled) which would mean the path was [F]illet, [D]imension, [Radius], value. I was getting frustrated with this and tried fiddling with the settings ([F]illet, [S]ettings) but could not sort it, and now when I do go to enter a dimension the only option I am left with is to "Select fillet arc", meaning I have lost the ability to enter a value in the command line.
How do I regain the ability to enter a numerical value for a radius?
AutoCAD 2013 :: Repeating FILLET Command When Using Keyboard?
Dec 31, 2013I want to make it so that whenever I type F for FILLET the MULTIPLE option is selected so I don't have to type F then M. Is there a way to make it so that when I type F it always gives me the multiple option without my having to type F then M? How would I do that?
View 9 Replies View RelatedAutoCAD 2013 :: Fillet Edge Of Extruded Spline Shape
Aug 16, 2013Autocad 2014.
I have the outline of a solid body guitar that I drew with spline, extruded and now trying put a 1/2" fillet radius along the edges, top and bottom.
Using the 3d fillet command produces an error, and extruding a profile along the edge path doesn't work either.
Attached is the spline outline, the red part is what needs the fillet, but the white part does not. However, they can't be extruded into a 3d solid unless their joined!
AutoCAD 2013 :: Sort Circular Divots - Part Fillet / Chamfer
Oct 27, 2013I'm trying to create these rounded divots in a solid. However the only way I know how to get this sort of shape is with a revolved PLINE - which I of course can't use to subtract material from my regular old box.
The shape I want is something like this: (the 2D is a profile of what I want in the end, a divot in a box)
AutoCAD Inventor :: Fillet Weld Not Showing Typical Bitmap Texture In 2013?
May 31, 2012Usually when creating a fillet weld it displays a texture of a wavy surface. I can only get a smooth surface. Is there a way to modify weld appearance to what I'm used to?
View 2 Replies View RelatedAutoCad :: Drawing Options From Rhino 3D
Oct 11, 2011Only two weeks ago I started using Autocad. In the past I used to do a lot of modeling with Rhino 3D. Because of the similarities among the two products, the change was quite smooth. Still, there is a series of (basic) operations I miss a lot. I hope they exist in Autocad too (who knows, under a different name).
Among the features I miss the most, are the following:
-Draw line > Both sides
-Offset > Both sides
-Direction lock (tab key)
Revit :: Editing Imported Rhino Mass?
Feb 14, 2013I have a relatively simple mass modeled in Rhino that I imported to a Revit Mass Family (via .sat file). I then placed walls, roofs, structure on the face of this mass. However I would like to be able adjust this mass, either in Rhino or Revit and the walls and structure adjust accordingly. Now however, if I reload the mass into my Revit family, and then reload the family to my model, and then attempt to Update to Face, the error "Faces defining this Element cannot be reacquired." and my only option is to delete the offending wall/roof etc.
Is this just a limitation in Revit/Rhino, or am I totally doing it wrong?
Maya :: 2012 IGES Export To Rhino?
Dec 6, 2011I am trying to export IGES file to rhino however when I open the file in rhino it says there is no geometry
View 2 Replies View RelatedAutoCAD 2013 :: 3D Object With Unconnected Edges
Sep 12, 2013In the attached file there is a single 3D solid object. But there seems to be several unconnected lines, out in space, that are part of the object, but un editable. By selecting individual edges (on the problem geometry) edges on the solid are also being selected.
View 6 Replies View RelatedAutoCAD 2013 :: How To Remove Edges Of Array Object
Jan 9, 2013I've created arc, then 3 side polygon and placed created array. Now I want to delete those sides. How can I do it?
View 2 Replies View RelatedAutoCAD 2013 :: How To Have Multiline With Same Width Even At Filleted Edges
Apr 19, 2013Multiline width issue at edges when fillet is applied,
I wanted to draw a multiline with curved edges and to keep the width (scale) of the multiline the same at these curved edges.
Scenario:
The multiline is drawn say with 20 meters width (screenshot is attached)
The multiline is exploded (screenshot is attached)
The edges are filleted, say with 20 meters radius (screenshot is attached)
Now, when the width of the multiline is measured at the curved edges, then it is found that the width is more than 20 meters! (screenshot is attached)
Then how to have a multiline with same width even at the filleted edges?
AutoCAD Inventor :: 2013 Material Display And Dull Edges?
Nov 11, 2013All the assemblies that I created in 2012 are showing with lighter color steel that I don't like. Is there any way other that selecting each member to change the display color to a darker steel color? I want to change the display quality to show the member edges as straight lines and not dull zig zag looking edges. How would I do that?
View 1 Replies View RelatedAutoCAD Inventor :: 2013 - Realistic Versus Shaded With Edges
Jul 25, 2012How do I get my part to be transparent in the "Realistic" view like it is with the"Shaded with edges"? This is what it looks like with the view style set to "Shaded with Edges". Notice how it is transparent and you can see thru the part.
Now when I switch to "Realistic", I get this. Anything that is behind this part is not visible.
I want to be able to see thru the part when in the reallistic visual style.
AutoCAD Inventor :: Workstation With Faster Renders
Apr 1, 2012After shelling out a pretty penny for Inventor 2012, my boss set me up with a less-than-adequate off-the-shelf PC. I don't need faster visualizations as I'm not dealing with super complex assemblies, maybe 100-200 parts. I also don't care about ray-tracing while modeling. My problem is it took 24 hours to render a 65 second animation (about 1000 frames).
my boss is going to allow me to build a new, more inventor optimized workstation. I am using studio to do fairly complex animations. Fades, camera changes, constraint animations, all rendered with higher quality. I need a computer that will render quickly, and possibly higher quality if available.
I don't fully understand the whole "Direct X vs OpenGL" stuff. What should I spend my money on, knowing that rendering, not modeling is where I need improvement. I am thinking AMD system to save $$. Also, what to look for, fast bus, cache, etc. Just remember, I need faster RENDERING in STUDIO ANIMATIONS.
AutoCad :: Faster Way Or Command To Which Lines Are Flying
Sep 28, 20111. is there a faster way or command to which lines are flying?coz i got this file from a collegue and i was wondering why is it that lines doesnt connide each other... so when i tilt the file into front elevation... i saw all the lines were not on the same elevation.. so what i did is to change the value of Z into zero....
2. does i press something... i used to select the object, pan and drag ( to select and add more on my selected objects.).now if i select the object and use the center of my mouse to drag... point were gone out... so i input first the command then select and drag..
AutoCAD Inventor :: Selection Trails - Fade Faster
Jul 23, 2013How I can make these trails fade faster?
View 2 Replies View RelatedAutoCAD Inventor :: Making ILogic Faster And More Efficient
Apr 24, 2013What are the best ways for speeding up iLogic routines? Can Inventor updating or re-calculation be suppressed while the iLogic code is running? Does ScreenUpdating = False accomplish this?
What other tips do users have for improving their iLogic code efficiency and speed?
AutoCAD VB :: Manual Work Faster Than Automation - Selection Sets
Oct 13, 2011I need to explode ~2000 PolyFace meshes in a drawing.Manually I can do the following:
> QSELECT - PolyFace Mesh - Select All
> Explode
I get a question if I want to "Disregard DrawingOrder for this operation due to the fact that it might take some time", by selecting "Yes" the process takes ~10 minutes (one explode).With an VBA automation I do the following:
> Create a selection set of all PolyFace meshes
> Explode each obj (2000 times) in the selection set with SendCommand (as .Explode does not work on polyface mesh objects)
I have waited hours for the same process (might be due to multiple explodes and/or screen updating taking place).I have always though automation is faster than manual work, but this proved me wrong.So to the questions:
1. How can I prevent screen updating in VBA (disregard draw order) during "long actions"
2. Is there a better way to explode a selection set than looping through each and every object calling explode (obj.handle)
For one drawing I can do it in 10 minutes, but I have 50 drawings with the need to explode this, having an automation run over night sounds great, but having it take 6x+ times longer for each drawing causes the night not to be long enough.
AutoCAD .NET :: Can Cache Files Manually / Faster Xref When File Cached
Jan 15, 2013I have noticed that a file is xrefed much faster if the file has been opened at some point. (Wtih the file I tested with it was 45 sec vs 1,5 sec) This must mean that the file is cached and can very quickly opened later if it has been opened.
I have an application that xref other files as overlay xref's. This is very slow since the xrefed files haven't been opened. And it will be this slow every time i xref them since they are never opened. Is there a way I can cache the files manually or something like that?
Photoshop :: More RAM Or Faster CPU
Jun 22, 2007I have an old computer Sempron 2600+ and 1Gb RAM. So my question is what I should to upgrade for more comfortable working in PS - buy a new CPU, or additional RAM?
View 2 Replies View RelatedPhotoshop :: More Ram Or Faster Processor
Dec 29, 2008improves performance more, more ram or faster processor?
I've got a Dell workstation 650, xeon processor 2.0GHZ.
2.5 GB Ram
XP Pro
CS
If I upgrade to 4GB Ram, will I see a big improvement? Or do I need to get a new computer with a faster processor plus 4GB or more of Ram.
Photoshop :: Saving So It Loads Faster
Sep 11, 2005I'm seeking a way to "Save for Web" so the website i'm working on will load faster than it does now.
Does any one know which options I should mess with to save it so it loads faster?
Photoshop :: Is There A Faster Way To Duplicate Layers?
Jan 7, 2005I'm duplicating layers one at a time. I have to duplicate the same layer for a total of 108 layers and this seems ridiculously time consuming. Can anyone tell me if there is a way to make a large number of duplications at one time?
View 5 Replies View RelatedGIMP :: Get Rendering Of Image Faster
May 8, 2013I am testing GIMP now, for professional use. As i believe there is much more out there to get GIMP exactly right than Photoshop.
I have to retouch images of 80mpix, and i wonder if there is any way to get the "rendering" of the images faster, as now it takes loads of time just to calculate ( line per line) the curve change.
And does 16bit exist on gimp ?
Premiere Pro :: Editing Flow - Can Do This Faster
Jan 14, 2014I am editing in Premiere Pro using AVCHD footage. It takes a few seconds for my MacBook Pro to catchup and think in order to play it smoothly. It is HD footage and up to 60 GB of footage in the bin. Rendering takes 4xs longer than real time it seems to be. I am not savy with editing.
View 2 Replies View RelatedPremiere Pro :: How To Get Faster Export Times
Mar 17, 2014My specs are
CPU: i7 4820k 4.4ghz
GPU: 4gb radeon r9 290 200 series
RAM: 16gb 2400MHZ
SSD: ASUS writes at 840/mbs
OS: Windows 8.1 64 bit
Using CS6
Taking like 15 mins to export a 374mb video
VideoStudio :: X2 Playback Is Faster Than Original Stream?
Apr 30, 2011I recorded a video from my TV and during recording everything looks normal.
However, when I play back the recording, everything is sped up. I can use VLC Media player to slow down the playback speed to normal, but I can't figure out why the recorded stream is faster than normal. Even when I burn the video to DVD, playback is faster than it should be.
Most streams recorded are played back just fine. Could it be that the source stream for this particular video is different than most and if so, how do I get VS to compensate for this?
Can I use VS to play it back at the correct speed and rerecord the recorded stream?