I'm duplicating layers one at a time. I have to duplicate the same layer for a total of 108 layers and this seems ridiculously time consuming. Can anyone tell me if there is a way to make a large number of duplications at one time?
View 5 RepliesI'm using CS6 and noticed that whenever I delete a layer that was a dupe of another layer with links (although not linked specifically to the deleted layer), the undeleted original layers become invisible on the canvas even though they are still visible in the layers pallette. I've been able to recreate this several times. Nothing I do will make the layers visible -I've tried moving them all to the top of the layers palette, making sure their opacity is 100%, making sure there are no layer effects, etc.
View 2 Replies View RelatedI have 2 opened files in photoshop, and I duplicated a layer in file 2 to the file 1. When I click on the file 1, I can see in the layers box the layer that i had duplicated, but I can't see the image on the screen.
PS: the layer is not hide
I am printing a program that is half of one 8.5x11 sheet, so I'd like to print 2 programs per sheet - I have resized the canvas of the document to 8.5x11, but is there an easy way to copy all the layers in the .PSD over to the other side of the sheet? I know I could flatten the image and copy it, but I'd like to retain the layers.
View 6 Replies View RelatedIs it possible to duplicate multiple layers at one time.
I can link layers and then do Merge Linked and then duplicate it,
How can I duplicate several layers together ? (in one layer manager)
View 2 Replies View RelatedI can't add and/or duplicate layers. I want to make a button (which I've made many times) But I can't add the appropriate amount of layering (in fact, I can't add any at all!
View 15 Replies View RelatedIs there a way to duplicate layers in text?
View 4 Replies View RelatedI was watching one of the tutorials by Scott Georgeson on lynda.com on Corel X6. It was on the polygon tool where he was making a polygon and adding different colored duplicate layers on top to make it multicolored. He said to hold the plus+ key and then grab handle to shrink one of the layers down to show some of the underlying layer. When I try this the layers aren't isolated and the whole thing moves. I saw a check box in the settings to edit layers separately but didn't work.
View 1 Replies View RelatedI have an Illustrator document with one layer (named Layer 1).In that layer are lines, rectangles and text.Is it possible (in script) to: make 3 additional layers named NL, EN and GEselect and cut all the text in Layer 1paste that text in the same place in the layers NL, EN and GE
(Step 2: select all text items and Ctrl-X)
(Step 3: select proper layer and Paste in Place in that layer)
I know this can be done with an action (I did that allready) but the reason I want to script this is because I have to combine this with another script which takes care of colorizing stuff.
I have an old computer Sempron 2600+ and 1Gb RAM. So my question is what I should to upgrade for more comfortable working in PS - buy a new CPU, or additional RAM?
View 2 Replies View Relatedimproves performance more, more ram or faster processor?
I've got a Dell workstation 650, xeon processor 2.0GHZ.
2.5 GB Ram
XP Pro
CS
If I upgrade to 4GB Ram, will I see a big improvement? Or do I need to get a new computer with a faster processor plus 4GB or more of Ram.
I'm seeking a way to "Save for Web" so the website i'm working on will load faster than it does now.
Does any one know which options I should mess with to save it so it loads faster?
I'm using PS CS 3 Extended and whenever I try to open multiple files/images (either by dragging/dropping, using the bridge or just using the Open dialog) it really takes a long time, because photoshop seems to want to "check" every image behind the one it just imported. Let's say I'm importing 40 pictures for editing into Photoshop and I'm upto image 30; then it checks every image behind that (29, 28, 27, 26 etc.), slowing the process down conciderably.
In previous versions of Photoshop, I used to be able to import multiple files and they would load up relatively quick, and it wouldn't do this "checking" of files behind the last file imported.
Is there any way to turn this "checking" off so the import process will be faster?
im just getting used to using PS and IR together although ive been using PS for a while and i wanted to know if one of the ways to have a faster loading image was to save it for web and lower its res or to actually create more slices and have the HTML generator create a table to load the image faster?
im trying to get the best load times for a 28.8Kbps modem load (setting the bar low to get best results).
I am testing GIMP now, for professional use. As i believe there is much more out there to get GIMP exactly right than Photoshop.
I have to retouch images of 80mpix, and i wonder if there is any way to get the "rendering" of the images faster, as now it takes loads of time just to calculate ( line per line) the curve change.
And does 16bit exist on gimp ?
I am editing in Premiere Pro using AVCHD footage. It takes a few seconds for my MacBook Pro to catchup and think in order to play it smoothly. It is HD footage and up to 60 GB of footage in the bin. Rendering takes 4xs longer than real time it seems to be. I am not savy with editing.
View 2 Replies View RelatedMy specs are
CPU: i7 4820k 4.4ghz
GPU: 4gb radeon r9 290 200 series
RAM: 16gb 2400MHZ
SSD: ASUS writes at 840/mbs
OS: Windows 8.1 64 bit
Using CS6
Taking like 15 mins to export a 374mb video
I recorded a video from my TV and during recording everything looks normal.
However, when I play back the recording, everything is sped up. I can use VLC Media player to slow down the playback speed to normal, but I can't figure out why the recorded stream is faster than normal. Even when I burn the video to DVD, playback is faster than it should be.
Most streams recorded are played back just fine. Could it be that the source stream for this particular video is different than most and if so, how do I get VS to compensate for this?
Can I use VS to play it back at the correct speed and rerecord the recorded stream?
After shelling out a pretty penny for Inventor 2012, my boss set me up with a less-than-adequate off-the-shelf PC. I don't need faster visualizations as I'm not dealing with super complex assemblies, maybe 100-200 parts. I also don't care about ray-tracing while modeling. My problem is it took 24 hours to render a 65 second animation (about 1000 frames).
my boss is going to allow me to build a new, more inventor optimized workstation. I am using studio to do fairly complex animations. Fades, camera changes, constraint animations, all rendered with higher quality. I need a computer that will render quickly, and possibly higher quality if available.
I don't fully understand the whole "Direct X vs OpenGL" stuff. What should I spend my money on, knowing that rendering, not modeling is where I need improvement. I am thinking AMD system to save $$. Also, what to look for, fast bus, cache, etc. Just remember, I need faster RENDERING in STUDIO ANIMATIONS.
1. is there a faster way or command to which lines are flying?coz i got this file from a collegue and i was wondering why is it that lines doesnt connide each other... so when i tilt the file into front elevation... i saw all the lines were not on the same elevation.. so what i did is to change the value of Z into zero....
2. does i press something... i used to select the object, pan and drag ( to select and add more on my selected objects.).now if i select the object and use the center of my mouse to drag... point were gone out... so i input first the command then select and drag..
I currently have my main catalog 'gwcat-2-2.lrcat' in what I think is the default directory of ":..D:UsersGeorgePicturesLightroom". I would like to move it to a faster drive. Should I move JUST the lrcat file, or is moving the gwcat-2-2 Previews.lrdata required?
There is a LOT of stuff in lrdata! and would take a long time to move. I've always been a bit confused by the difference between "Previews.lrdatafa" and the cache directory (I already have the cache directory on SSD). --If you go by just the definition of terms, it seems like a distinction without a difference.
How I can make these trails fade faster?
View 2 Replies View RelatedI use Rhino to make pendant models but I find that Rhino's fillet function very slow and inefficient, so I'd like to know if Autodesk would be better at doing that.
View 9 Replies View RelatedMy animator asked me a good question, he's breaking up models to rig/animate and of course shen he does multiple UVsets generate. Is their a faster way to copy and move UVsets to Map1 and then delete the old Uvset from the model? A script, or a working method. I knopw that in Max it apprently would do it for you.
View 5 Replies View RelatedI think there should be a 'edit cfx' menu when we right -click the clip in timeline. This is very handy to get fast access to the cfx. Yes i can click the small cfx icon/button and RMB - edit cfx , or i can double click the cfx button itself, but this only work when the cfx button is visible. Also there should be a hotkey for this.
View 3 Replies View RelatedWhat are the best ways for speeding up iLogic routines? Can Inventor updating or re-calculation be suppressed while the iLogic code is running? Does ScreenUpdating = False accomplish this?
What other tips do users have for improving their iLogic code efficiency and speed?
I'm cropping a few thousand pictures, and the crop tool is just sluggish.
Changing the crop or moving the picture behind the crop is jumpy, sometimes it needs seconds to change the display, which makes cropping pain to work.
Even after the picture is loaded and the lightroom rested some time, cropping is sluggish, which should not be, since the picture is fully in the memory and moving it around should be easy for the computer.
So how can I get the crop tool to move faster?
I'm using a Win7 Core i7-2600 with 16GB Ram, LR catalogue on Intel SSD, images on a fast SeaGate HDD, AMD Radeon HD 6800 grafics adapter, 30" (2560x1600) display. The files are NEF from a Nikon D800E, but the files from my D700 are slow, too.
I've created a new video player for my client who has bounced the job as the subs are overlaid by the controls of the video - he still wants the full screen option but does not want to see the controls once you play the video.
[URL]
why my video plays faster than the set animated sequence i have saved in the playback preferences. I have a camera on a motion path and have slow the playback speed to 3fps yet when i play the avi video in quicktime after it's rendered it plays much faster.
View 3 Replies View RelatedI need to explode ~2000 PolyFace meshes in a drawing.Manually I can do the following:
> QSELECT - PolyFace Mesh - Select All
> Explode
I get a question if I want to "Disregard DrawingOrder for this operation due to the fact that it might take some time", by selecting "Yes" the process takes ~10 minutes (one explode).With an VBA automation I do the following:
> Create a selection set of all PolyFace meshes
> Explode each obj (2000 times) in the selection set with SendCommand (as .Explode does not work on polyface mesh objects)
I have waited hours for the same process (might be due to multiple explodes and/or screen updating taking place).I have always though automation is faster than manual work, but this proved me wrong.So to the questions:
1. How can I prevent screen updating in VBA (disregard draw order) during "long actions"
2. Is there a better way to explode a selection set than looping through each and every object calling explode (obj.handle)
For one drawing I can do it in 10 minutes, but I have 50 drawings with the need to explode this, having an automation run over night sounds great, but having it take 6x+ times longer for each drawing causes the night not to be long enough.