My animator asked me a good question, he's breaking up models to rig/animate and of course shen he does multiple UVsets generate. Is their a faster way to copy and move UVsets to Map1 and then delete the old Uvset from the model? A script, or a working method. I knopw that in Max it apprently would do it for you.
View 5 RepliesI need to explode ~2000 PolyFace meshes in a drawing.Manually I can do the following:
> QSELECT - PolyFace Mesh - Select All
> Explode
I get a question if I want to "Disregard DrawingOrder for this operation due to the fact that it might take some time", by selecting "Yes" the process takes ~10 minutes (one explode).With an VBA automation I do the following:
> Create a selection set of all PolyFace meshes
> Explode each obj (2000 times) in the selection set with SendCommand (as .Explode does not work on polyface mesh objects)
I have waited hours for the same process (might be due to multiple explodes and/or screen updating taking place).I have always though automation is faster than manual work, but this proved me wrong.So to the questions:
1. How can I prevent screen updating in VBA (disregard draw order) during "long actions"
2. Is there a better way to explode a selection set than looping through each and every object calling explode (obj.handle)
For one drawing I can do it in 10 minutes, but I have 50 drawings with the need to explode this, having an automation run over night sounds great, but having it take 6x+ times longer for each drawing causes the night not to be long enough.
Is there a way of scaling or transforming vertices uniformly without having to clean up some of the vertices afterwards.The closest attempt I have got is to switch the move tool to normals but this still requires a bit of straightening up afterwards.
View 2 Replies View RelatedI am wondering if it is possible to move/focus the manipulator gizmos in Maya.
If I for example am working on a tall plank and want to align the bottom part with something I'd zoom in to be more precise, but since the manipulator is stuck in the middle of the plank I have to zoom out anyway and find a spot where I'm fairly zoomed in but still can see the manipulator.. If there is a way to make the manipulator follow on the screen when i zoom in (without altering the pivot point) I'd be able to work so much easier.I am of course talking about all the manipulators (move, rotate and scale).
I'm rigging a model of a robot and I have wires (nurbs circles extruded along a curve) attaching to two objects that are on different joints. I have it rigged so that when the first joint moves, half of the CVs of all the wires (in a control cluster) move along with the joint (and, in turn, the object they are attached to). This much works fine, the extruded nurb follows the curve and stays the same diameter from start to finish. My problem starts with the rigging of the second joint (the second joint is the parent of the first joint). I've tried many different ways of rigging it, but as I'm only just starting rigging my thought process isn't quite a straight line yet. Basically my problem is when the source curves physically move, the extruded surface goes twice the distance as displayed in the picture below.
I need to know how to get the extruded surface to always be in the same place as the curve with out breaking the connection.
I currently have my main catalog 'gwcat-2-2.lrcat' in what I think is the default directory of ":..D:UsersGeorgePicturesLightroom". I would like to move it to a faster drive. Should I move JUST the lrcat file, or is moving the gwcat-2-2 Previews.lrdata required?
There is a LOT of stuff in lrdata! and would take a long time to move. I've always been a bit confused by the difference between "Previews.lrdatafa" and the cache directory (I already have the cache directory on SSD). --If you go by just the definition of terms, it seems like a distinction without a difference.
why my video plays faster than the set animated sequence i have saved in the playback preferences. I have a camera on a motion path and have slow the playback speed to 3fps yet when i play the avi video in quicktime after it's rendered it plays much faster.
View 3 Replies View Relatedi had custom rigs with a character set to store our animations in clips. now i want to do the same with the new humanIK rig. the documentation is not very big on this. it just covers the retarget workflow.which nodes do i have to include in my character sets, so i can store my animations in one file?(retargeted and classic hand animated) or is there any documentation i overlooked on this?
View 1 Replies View RelatedHaving an issue with joining two vertices that are so close to each other, it isn't funny!! I just need to join 2 sets and I can move on to the next portion. Why these aren't joining?
See attached pic.new_bitmap_image_3.zip
I am trying to find a way to programmatically move our AutoCAD room tag attribute data to new AEC space property sets. I work in a hospital that has approx. 1 million s.f. and over 3000 rooms. Obviously a daunting task to do room by room.
View 4 Replies View RelatedI have a problem when I am modeling my character or rather the character from the animation academy. I have created an NURBS sphere and I want to adjust it to the arm, so I go to the component mode add some isosparms and then it happens!!! I can´t move any vertexes... but in the object mode I can move the hole object.
View 1 Replies View RelatedI have 2 identical files. same character, same rig, same character sets. One has animation. Can I just copy the curves of one character set and somehow put it into the character set of the other file?
View 1 Replies View RelatedOnce i set up a motion path for my object to follow, it sets the object to follow it over the entire timeline. what if i just want to object to start later on? I want it to raise up, hover over to the path, and then be attached to it.
View 2 Replies View RelatedI have a problem. Randomly today, the usual controls for moving, scaling and rotating are gone, instead there are just red lines for the X, Y and Z axis. How can I get the other ones back?
View 2 Replies View RelatedI have difficulties using Cloth : Some years ago I had less problems with Cloth but my characters were much taller than real characters, 2 or 3 meters high for example. Now, I have decided to use realistic sizes for my characters, hoping it would improve the result with Cloth, but it is the contrary. With my new characters, 1 unit = 1 centimeter and it is almost impossible to have a perfect result. I was wondering if it is possible to move manually some vertices within Cloth after the simulations for correcting the inaccuracies.
View 2 Replies View RelatedI have a bunch of curves that is going to drive nhair. However I'd like to use the "soft modification tool" to do further adjustments to the curves. But I'd want to pin the root of the curves so it doesn't fly off the head when I use soft modification. Is there any way I can lock or pin the root CV of the curve? (its a cubic nurbs curve)
View 1 Replies View RelatedI made a patch of grass moving yesterday using this tutorial (URL....) it worked perfectly and I got a test render out yesterday, today I open up the file and the grass does not move with the hair follicles and I do not know why, nothing has been changed since the render.
Opened up a new scene, tried going through the steps again and it does not work.
I wish to create a testing surface for simulation from a DSM height data (under a college assignment). I downloaded a height data from [URL]........ in a .dwg file format and want to import in on maya and create a surface out of it.
I am using maya 2013 on windows OS.
[URL]........
This is my model. Simple.
Now the only thing I want to do is to cut out this:
[URL]........
I used the Extrude tool just for visualization. The problem is, working with booleans apparently doesn't work for such objects, it works for freshly created clean polygons, but not for this one, when I try to use "Boolean difference" both objects disappear.
Extruding doesn't work because the faces are still there and I cannot delete them for whatever reason:
[URL].........
My cursor is pointing on the little face, but both are being highlighted. Making a hole through the the "Make a hole" function doesn't work because it only deletes faces as it seems.
i have been having problems with maya where i can't select individual faces vertices or anythign other than the entire model
View 8 Replies View RelatedMy model loses lambert on only certain faces every so often. Might be related to clicking on camera or trying to extrude certain edges. I want to delete the camera but this happens to the model every time i touch the camera. I can't reapply the lambert by pressing 6 or assigning new material. if you know what's happening.
View 1 Replies View RelatedI am looking for the same function in Maya that I use alot in 3DS. In 3DS, you can "Merge" (import) models from another scene (file) into your current one. It allows you to pick a single model from the imported scene to be imported into the current scene.
I know Maya has the import function but it seems to import all the objects. I just want to import a particular model.
Is this possible in maya?
3DS Max 6 to 2009, Maya 2010
NVIDIA Quadro 1700, Quad Core 2.67GHz, 4Gb RAM
[URL]....
Here is what I've tried so far in creating the pupil of the eyeball:
1. Right click - select isoparm - attempt to select.
2. Right click - select Surface Point - attempt to select.
3. Left clicking
4. Holding shift (and other keys) - attempt to select
5. Right clicking
6. Middle clicking
7. Marqueeing
When I right click - select surface point, I get something that looks like a selection, but it also has an isoparm dotted line.... when I attempt to DETACH I get an error.
I am attempting to import 3d models from a software called Daz studio into Maya. The models enter motionbuilder and 3ds Max with no problem. When I import them into Maya they come in as wireframe. I have been unable to take the wireframe off of the model. The file format I am using is FBX. wHEN I RENDER an image of the model i am able to see it in it's realistic form-but when i attempt to see it in the viewport it is wireframe.
View 1 Replies View RelatedSay I have a car engine that I created. to make it easier on myself I made it out of a bunch of separate pieces. then at the end I combined them into one. somewhere down the line I'll want to animate the pieces separately, but until then I dont want all that inner geometry rendering because it takes up unnecessary render time. is there a function in maya where I can delete all invisible mesh geometry? so then any faces inside the outermost shell will be deleted.
View 1 Replies View RelatedIn earlier version thats work just fine, but in 2013 i cant convert selections,...
View 1 Replies View RelatedI'm new to Maya, and also new to 3d modeling/animation programs. how can i learn Maya 2011? there are not very good learning paths to find on the internet.
View 1 Replies View RelatedIm a maya user since 3 or 4 months. Distance between tool for rigging which i cant find in maya 2013.
View 2 Replies View RelatedHow to craete feathers in maya 2012? Or any good plugin for it for win. 7 x32 bit Maya 2012 ?
View 1 Replies View RelatedI'm having trouble with shading objects I imported from SolidWorks using SimLab's plug-in. My problem is two-fold:
First, the polygons appear to have bizarre twists and bends in them, but there are no corresponding edges to create these deformations. Also, Maya thinks all the faces are planar. I tried cleaning up the objects and it yielded no results. These weird twists appear in both the work space and when rendered. I have tried deleting overlapping edges, but it didn't work.
Second, when I try to apply a bump map to my objects, they don't work. I tried using a noise and a fractal bump map and neither appear on the rendered image. However, the Brownian bump map works. I have tried creating other objects in the scene and the noise and fractal bump maps work just fine on those, just not on my imported geometry. I figured out a brute-force method to make the bump maps work - I delete a polygon and use the append tool to create a new polygon - but I have over 110,000 polygons on this thing.
I'm working on an 8-core MacPro running Windows 7 64bit with 32 GB RAM and two GeForce 9500GT video cards.
I'm creating a face, but what I want is to have whatever happens on the right to happen on the left, instead of clicking each point to move the edges. I tried just cutting the face in half and duplicating, but I don't know how to flip second copy.
View 2 Replies View Related