AutoCAD Inventor :: Delete Fillet Without Deleting Half Of The Part At Same Time?
Oct 10, 2011
I made a fillet earlier and then continued to work on the part. Now when I try to delete the fillet (to replace it with chamfer) Inventor gives me a box: "delete features" and the middle box can be selected which says "dependent sketches and features". If I check the box and hit ok, some of the unreleated holes and chamfers gets deleted and the fillet I wanted to delete doesn't get deleted. If I uncheck the box, different chamfers and threads dissappear, fillet I wanted to delete stays in place again and yellow box appears on the corner of the part. So what should I do to just delete the fillet and keep everything else?
View 4 Replies
ADVERTISEMENT
Dec 7, 2011
Can you delete part of a fillet feature? While still keeping part of it & adding to it.
I have a fillet feature with 2 fillets to a part. One is in the wrong place.The Feature Fillett1 if you edit it, you will see what I mean.
Keep the middle one. Both fillets are 0.25" / Replace the bottom fillet to the top corner.
I would like to keep the Feature in the order it is in, if possible.
I am using Inventor 2012.
View 2 Replies
View Related
Sep 20, 2011
I need to fillet part on an edge on the top face of the enclosed part, is this possible? I have tried a few things but the fillet command always selects all the edges on the face to fillet.
once selected it says in the selection box that 15 edges are selected, and I can't ctrl click to remove any of them singly, basically it will deselect them all? I have made sure I have loop select off.
View 2 Replies
View Related
Aug 13, 2013
attached is an image of an assembly, i placed a part in the assembly and only half of the part is displayed.
View 2 Replies
View Related
Oct 13, 2012
I created a work point on a part. How do I delete it? Right clicking on the work point in the model browser doesn't give a Delete menu item.
[URL]
View 2 Replies
View Related
Mar 7, 2012
We are using basic Vault and have some parts that are obsolete or duplicates. We don't currently have the resources to completely replace/purge them in all the assemblies (many of which are old desgns that may never be built again) in which they are used.
Our problem is that engineers keep using these parts in new assemblies and it doesn't get caught until the assemblies are ready to be ordered. Then the assemblies have to be updated, vendors contacted, etc. to correct the situation.
Is there a way to block a part from being used in the first place without deleting it? Or some way to alert the engineer that they are using the wrong part?
View 1 Replies
View Related
Mar 7, 2012
removing the material to a part.
Lets say i applied first Brass to a part and i changed to other. I wil check the properties.
Finally i want to remove the material to same part.
View 2 Replies
View Related
Oct 11, 2012
I am tryiing to "purge" a local appearance in a part. From the tools>Appearance, I want to delete the Knurled (Coarse), but the delete is greyed out.
I cleared the appearance overrides, but it is still greyed out. Here is a short video of what I have tried.
The reason I am going thru this excersice it to remove the knurl.bmp that shows up in by vault browser... watch the end of the video.
View 2 Replies
View Related
Nov 17, 2011
Is there such thing or add-on, that would accumulate time worked on a assembly / part?
View 9 Replies
View Related
Nov 10, 2011
How do I delete work plane 1 from the attached part, 'test derived'?
workflow.
create a part, pattern a plane, save as 'test deriver'
create new part, derive work plane 1 from 'test deriver' sketch onto work plane 1, save as test derived
go back to 'test deriver, delete the pattern and create a new pattern, work plane 2, (i couldnt just edit it because the real life case was a series of patterns at different distances)
open part 'test derived', edit the derived part to include work plane 2, (work plane 1 doesnt exist in 'test deriver' anymore) redefine the sketch onto work plane 2
try to get rid of work plane 1 from the part?
View 4 Replies
View Related
Apr 22, 2013
Divide The Tube Part in half its too big for my 8in x 8in 3d printer. The last time i used it was on a dos operating system and it has changed a lot since then. URL....
View 8 Replies
View Related
Oct 27, 2013
I'm trying to create these rounded divots in a solid. However the only way I know how to get this sort of shape is with a revolved PLINE - which I of course can't use to subtract material from my regular old box.
The shape I want is something like this: (the 2D is a profile of what I want in the end, a divot in a box)
View 5 Replies
View Related
Mar 18, 2012
how do you get an image to half that "cartoon" look but at the same time realistic?
View 9 Replies
View Related
Aug 26, 2011
I have been trying to make an animation with a logo, I have to use pro cutter in order to accomplish this task. My problem is one I use a box mesh as a cutter, then cut it, I delete the box meshes, but pro cutter has duplicated them and merged them to my mesh. So I can't delete the extra boxes without deleting my mesh.
View 5 Replies
View Related
Jan 14, 2014
How do I delete images from elements 12 with out deleting them from my folders?
View 2 Replies
View Related
May 29, 2013
I can't delete anything from my Organizer. The error message is "Error deleting media".
View 3 Replies
View Related
Oct 24, 2012
Untitled-1 copy.jpg
When the modify dimensions box is open, the 'roundoff' menu gives me 1/16", 1/8" etc, even when DECIMAL is selected as the unit format.
This wasn't happening earlier, not sure what's going on. [in fact in a solved problem from earlier, a colleague found a drawing that had units set to millimeters, had its insertion scale set to inches! Different computer, so not related].
View 3 Replies
View Related
Mar 15, 2011
there is a way to delete multiple profiles at the same time?
Currently, I have to go through the prospector and delete them one at a time. I have an alignment with many profiles (various walls along the length of the road), but have split the drawing up into several files... How can I delete all the profiles at once?
View 4 Replies
View Related
Sep 9, 2011
trying to delete a file every time CAD is fired up and/or a new drawing is opened. i cannot make it work so far. planning to incorporate it into acaddoc lsp file.
(defun deletestupidfile()
(vl-load-com)
(setq myname (getvar "loginname"))
(if (= (getenv "PROCESSOR_ARCHITECTURE") "AMD64")
(progn
[code]...
View 5 Replies
View Related
Feb 19, 2012
I have remodeled a part I was working on previously, but now an edge doesn't want to fillet, as it was on the old model ( in the top right corner )..
View 2 Replies
View Related
Oct 11, 2013
I am working on my project at home and I am having some problems with the fillet tool.
Attached is a picture of my problem with what it is doing.
I am trying to fillet A to E and E to C (B to D and D to F also)
On the left hand side when I fillet, it connects C to E instead of A to C and I do not know why it is doing that or what I am doing wrong.
View 2 Replies
View Related
Dec 7, 2011
How do i make the 3mm fillet go in the other direction.When i apply the fillets to the top of the pipes it goes inwards but i want the fillet to go outwards.(like a weld - i don`t want to weld though just use a fillet).
View 1 Replies
View Related
Mar 14, 2012
Is there a way to create smooth transitions for fillet welds for around corners?I have to create four separate fillet welds on all sides of the mating pieces and it breaks at the corners.
View 2 Replies
View Related
Sep 23, 2013
What kind of fillet i need for relax the edges in a eccentric reducer pipes's fitting, i can use fillet of faces for the sircular edge smaller , but am in troubles with the bigger .
View 1 Replies
View Related
May 6, 2013
I have a little issue with drawings where I cannot find out how to highlight fillet edges on the models. I dare say I am missing some simple setup option.
The picture attached shows what I mean. The left is how the model looks in drawing mode and on the right is how I would like it to look (taken from the modelling environment).
View 1 Replies
View Related
Apr 16, 2013
I have searched the discussion groep and have not came up with any usefull information.
I have an inside web plate sketch that i want to offset but my offset does only do one line at a time.
So my problem basicly is that I want it to do the whole sketch in one click. Is it possible to join all the lines? or is there another function that I do not know of that will do this for me.
Attached is photos of the problem I have
1 picture - How do I join these lines
2 picture - How the whole sketch looks
3 picture - The offset does only do one line at a time (i want it to do the whole sketch)
View 6 Replies
View Related
Oct 30, 2011
I'm currently modeling a propeller and i want to fillet the base of the blade to the hub but the way i have it will only let me fillet it towards the patched surface on top of the cylinder, what can I do?
I would also like to have the fillet be a large radii on the center and be small at the leading/trailing edges.I just tried posting it but the file I have available now is bigger than the limit and I cant compress it to 1.5 mb, while I get acces to the file on monday:
The blade is comprised of 2 lofted surfaces and patched surfaces to join them and make a closed loop, one of the patched surfaces ''hugs'' the cilinder outer surface (hub), when I try to fillet the it tries to smooth from the lofted surfaces to the patched surface, making the arc to the other side i want it to.
View 6 Replies
View Related
Sep 14, 2012
I have been asked to change some of the default weld settings within the weldment template, i.e. set groove weld to full face full face, set the fillet weld to 6x6. so that when we do a new weldment these things are already set, have hunted high and low on here, through google, autodesk knowledge base for inventor but havent found anything, not sure if havent put the right keywords in or that it just isnt possible to do.
View 2 Replies
View Related
Sep 15, 2013
I generate 3 points, two lines between point 1,2 and 2,3 and make a bend between the two lines. Cannot do it correctly.
On one side the fillet is not trimmed correctly. I think it is a bug in Inventor. Also when I have the sketch I manually cannot make a decent bend/fillet in the 3D sketch I created.
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click 'add 3d sketchpoints in open partdoc Dim oPartDoc As PartDocument Dim oPartDef As PartComponentDefinition Dim oTG As TransientGeometry oTG = _invApp.TransientGeometry oPartDoc = _invApp.ActiveDocument oPartDef = oPartDoc.ComponentDefinition Dim oSketch As Sketch3D oSketch = oPartDef.Sketches3D.Add() Dim sp1(2) As SketchPoint3D Dim rod(1) As SketchLine3D sp1(0) = oSketch.SketchPoints3D.Add(oTG.CreatePoint(0, 0, 10)) sp1(1) = oSketch.SketchPoints3D.Add(oTG.CreatePoint(0, 0, 0)) sp1(2) = oSketch.SketchPoints3D.Add(oTG.CreatePoint(10, 0, 0)) rod(0) = oSketch.SketchLines3D().AddByTwoPoints(sp1(0).Geometry, sp1(1).Geometry) rod(1) = oSketch.SketchLines3D().AddByTwoPoints(sp1(1).Geometry, sp1(2).Geometry) 'bending it oSketch.SketchArcs3D.AddAsBend(rod(0), rod(1), 2.5) End Sub
The resulting part-file is added, for who wants to try to get a bend with both sides trimmed correctly.
View 2 Replies
View Related
Feb 16, 2012
i am learning publishing parts to content centre so as to use for frame generator.Success so far except i cannot work out how to change Fillet sizes with the Family Table.As i increase the sizes of beams i want to also control the fillet size within the Family table.Where do i add the fillet parameter?
INV 2012
View 4 Replies
View Related
Mar 23, 2012
I need to show fillet welds between the bar and the curved surface. There is a small gap there (3/8" bar against 2 3/4" O.D. tube) and IV and neither groove or fillet weld works. How to show the weld?
I am using IV2009.
View 1 Replies
View Related
