AutoCad 2D :: DText Not Prompting For Text Rotation Angle
Jun 22, 2011
I've received a drawing from a client today and in it there are several text styles. One has Arial as its font. When this text style is current and we insert some dtext AutoCAD does not prompt for the text rotation angle, it uses the last rotation angle we used.
As far as I know there is no system variable that controls this behaviour, or have I missed it. Other delivered text styles do not have this problem.
I have a plan with lots and lot numbering. I made the lot number text annotative and matching view orientation. But when it rotates in the view it rotates about the left justification point instead of middle as inserted into drawing. So I inserted lot numbert text into drawing and changed text to non-annotative, but now i can not change the text rotation angle unless i use rotate command on each individual piece of text (was trying to pick all text and change in properties box). Using feature lines to assist in grading design so not sure if this is an autocad problem or a civil 3d 2012 problem. I can rotate dtext made or inserted in drawing.
I have a property line that is N 36d19'52" E but needs to be N 12d52'18" E. The obvious and calculated rotation angle would be 23d27'34" but when I rotate the line by the calculated angle it doesn't rotate to the right angle. It's off by 0d11'10"!? When I draw a line by bearing at N12d52'18" E and inquiry the angle between the property line and the drawn line the angle difference is in fact 23d27'34".
I am working on a project with several sheets. The viewport rotation (or angle) on each sheet is different. How can I find out the viewport rotation (or angle)?
I am trying to get DText objects to update width factor when I change the Width Factor of the Text Style. We have one style (Simplex) & I hoped to be able to set the width factor of that style to 0.8 or 1.2 depending on what is required and then just insert objects from the tool palette so they have the correct width factor.
This seems to work for MText but not for DText or Attributes. Short of using lisp is there a to update the width factor of DText & Attributes? (hoping to be able to do this on LT also)
Only way I can see for DText is to qselect text and change style to something else and back to Simplex. Only way for attributes I've found is to advance edit block and change text style to something else and back.
Using the mvsetup, a colleague of mine rotated the model space in the viewport. I cannot determine what angle was used, is there an setting in the properties manager to show the rotation angle or other way to find out?
I am trying to select multiple instances of text (dtext) with different strings but want to change all of the fomats to the same settngs. I have searched high and low on the web to no avail. I am using AutoCAD 2012.
For example: I want the routine to find all instances of "AA", "AB", "AC", "AD", "BA", "BB", "BC", "BD", etc... all the way up to "ZD".
Next I want all of those text entities to change to the following text formats:
Getting this to work with just finding one string at a time with the ssget function seems simple enough, but it's getting it to work with multiple strings that I can't get past.
I went to content browser and loaded the "Plan Elevation Label" onto my tool palette when I go to place the label in the drawing it prompts for elevation and nothing else.
How can you change the rotation on the screen accept to use the rotation command?
The tag itself is referencing a block I went to the block and changed the block now if I go to insert the multi view block it prompts for rotation but not to edit the attribute is there any way to get it to do both?
Just exactly what does "Angle" represent when placing a "Rotation Parameter" in a DBlock?
I've tried a bunch of diff angles and haven't noticed a difference. I'm trying to figure out just what effect diff values would have. I thought that maybe when rotating the block instance, I'd only be able rotate it "so far" (270 degrees in the example I've shown). But it still went well beyond that.
I have some 300 images, all handheld shots done in an on-location studio set. They all need varying amounts of image rotation since they're handheld. There's a beaded curtain in the background, so manually I use the ruler tool, draw a line along a strand of beads, and then image/rotate/arbitrary.
I need to create an action that will (1) do the arbitrary rotation and then (2) save and close the file.
However, when I record this, the value of the rotation of the sample file I'm working is what gets recorded (not surprising). In other words, if image A needs 0.28 degrees of rotation, that's not what I want for image B which might need -0.15 degrees instead. The action recorded 0.28.
Is there a way to create an action that will simply rotate according to the ruler once I've drawn it?
I've been using Corel Draw! 8 for years and my favorite tool was the angle of rotation. For example, I would select an object, usually a rectangle that has the point of rotation at end of the narrow rectangle. As I rotated it, I could see how much the angle of rotation in degrees is. Therefore I could type a value in the box and the rectangle would rotate some many degrees. Fast forward to my Corel Draw 12. Now when I click on the same object, the box will display what the angle is in degrees already based on the circular angle startingaat the nine o'clock position. I need it to say ZERO and I can't find the setting to set it at zero
what I am drawing is I rotate a narrow rectange and basically creating a dial face for instruments.
dtext function not working. when doing dtext but using the insertion point of some previous text. will not move to next line unless some text placed on first line. is there a setting, no issue in 2011
A drawing that is in Vault, it asks if you want to check it out, and if you say no (like if you just need to print it), it opens it then asks you again if you want to check it out? Did it not get the hint the first time?
If you have a VP color asigned to a layer and you edit single line text on that layer by going into modelspace thru the viewport, the text reverts back to its modelspace color. It does not do it with MTEXT and moving or copying the text doesn't change it. The only way I've found to change it back is to change the color in properties and the change it back to by-layer.
how to change the DTEXT command to be typed on a specified layer. I have poked around and came across some macros editing but this did not do the trick.
I have have an aligned dimension that does not rotate in a paper space print window. Contour labels, alignment labels all rotate except for the dimension.
I am making a template file having title block with fields. I use this template for creating layouts and sheets using Sheet Set Manager and the fields will be updated from the data of SSM. Now i would like to add a dynamic north block to my template. The block could be rotated (i have this block in file itself) and rotation angle could be inserted. Now how can i add a custom field to SSM so that i could set a rotation angle for the project and thus every new layout or sheet created using the template has the north block rotated with the angle mentioned in SSM.
How can I revised the line type so that the text reads in the same direction. The linetype text auto adjust to read correctly in Model Space. However In the plan and profile drawing the site is rotated 90 degrees so when the text changes direction from northwest to northeast and the line text changes direction. I need for the text to be in the same direction the entire length of the line.
Using Enhanced Attribute Editor one can set attribute text rotation to 0 when the block is rotated. But it must be done for each block individually. Is there a way to do this for several blocks at the same time or globally?
I know making block or text annotative does it but it requires redefining block, something I do not want to do.
I'm just trying my hand at learning to create some dynamic blocks, but need a solution to keep the text unrotated. I have attached a file of my troublesome file for you experts to look at, if possible.
PileTest.dwg
The file is basically a plan view of 4x foundation columns for overhead line towers (pylons). These towers can be different sizes and at different orientations, hence the dynamic options I have applied. However, when I rotate the block I want the text to rotate with it (to keep aligned with each column A, B, C, D), but I don't want rotation to be applied to the text, if that makes sense?
I have a feeling that constraints might work, although I know nothing about them, but these usually lag my PC. At present I am having to explode the block and apply a 0 rotation to all the text.
I have a section symbol that I want to rotate and keep the text at 0degress relative to UCS. The text is not in the middle so I can't rotate about the cetner of the text. I'll attach the block so it's more clear.
Right now the only fix is to assign a seperate rotation grip to both attribute text items.
I have my annotation scales setup, I can move each scale individually but i cannot rotate individually, ie if I rotate one scale it does the same for rotation for every other scale
This is just a basic block to specify a section plane. What I would like to have is a BPT with 4 rotation options (0, 90 180, 270) that would rotate the whole block but it would keep the text upright and be able to stretch the ends of the arrows. I know I must be including/not including something important. Pointers on how to do this
I just received a large floor plan and loads of the text is upside down. Usually I would use the TORIENT command in Express Tools although this doesn’t seem to work.
The error I get is:1 object was not parallel to the current UCS.No valid objects selected.
I’ve tried flatten, mirror & rotate but I still can’t get the text to display correctly.
I’ve attached a DWG file (2010 format) with a piece of text.
I placed all my leaders (mleaders were used) and text, then I had to change my viewport rotation 180 deg. Now all my text is upside down. I change my UCS to view and new mleaders and text (which I don't need, I've already labeled everything) come in at the correct orientation, but all my original labels are rotated. How can I make these labels update? I'd really like to avoid having to relabel everything.
Windows 7 x 64 bit NVidia Quadro 2000 Dual Monitor 6.00 GB RAM Intel Xeon W3550 @ 3.07 GHz Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3