AutoCAD Civil 3D :: Xopen Converts Reference File Name To Lowercase
Mar 28, 2013
If we use the command ._Xopen to open a reference drawing, the file name of the reference file is converted to lowercase, and it gets saved this way if we save the drawing. (We typically name files using Camel Case and want to keep the file names this way)
However if we open the reference file by right clicking on the file name in the Reference Manager and choosing open, then the reference file is opened and the file name retains it's case.
I have a surface, to which I've added data from a ENZ file. No problems - I had a workable surface. I want to be able to work on the drawing at home as well as work. So I brought home the DWG as well as the ENZ file thinking that if both were in the same directory, it would work OK. But I get an error saying the Point file can't be found. I can't see any way to make the file reference relative, rather than absolute.
I was working on my project today when the window popped up telling me to reload my pavement file. When I reloaded the file, the reference said it was unresolved. I tried to open that file directly, but it would not open.
my colleague that is on holidays right now sent some civil 3d drawings that contain data references to another office and they are having broken reference issues with the surfaces. I opened the drawing in our office and the surfaces are there and showing the data ref symbols in prospector but when i look through the data shortcuts folder below in prospector the surfaces are not there.
how do i locate the .xml files or if they have been deleted how do these surfaces appear in my drawing.
We are using Autocad Civil 3D 2010 and are also using the 2010 Vault.
We are having problems with one project in Civil 3D (project in Vault). We are trying to create a surface reference and are getting the error: "Drawing is already attached to project X."
Note: This drawing is not vaulted, only the cross section surface that has the final grade surface in it is vaulted.
When we test the same process with a new document we are able to reference the surface fine and the command shows: _AeccCreateSurfaceReference which works properly.
I have structures and alignments data referenced. If I assign the structures ref alignments in the dwg with the data refs for labeling, the next time I open the dwg the ref alignments are set back to none, causing the labels to be ?
I'm working on a large infrastructure project with numerous of drawings. On quite a few layout drawings I need to have the same base set of references, however I need to change the layer settings (colors, lineweight etc.). This cannot be done in the base reference itself as it is used by others. As the layouts I work with includes other references as well, it is time consuming to filter and change layer settings on each base reference.
My concept is to have a master reference file to manage all layer settings and add/remove base references. When the master reference is referenced into the layout, all layer settings on the base references should stay as set in the master reference. In this way I can easily control all base references with one file and make sure all changes will be the same for all the layouts.
I am getting this error in my production drawings.
My setup is as follows:
- EG.dwg has my existing surface in it. I create a data reference to use it in other drawings.
- Level One.dwg has the EG surface data referenced in, and I use this to create alignments, profiles, and finish surface. All of these are turned in to data references.
- Storm Sanitary.dwg has my pipe designs. I data reference in the two surfaces, profiles, and alignments, and create pipe networks. I create references for these networks.
- Plan Profile.dwg is the production sheet I'm getting this error from. Every one of my civil objects is data referenced in to this drawing. Everything is inserted correctly, the pipes show correct FG surface elevations for their rims, etc.
BUT when I open this drawing, I get this error. I assume it's because my FG surface is not directly in the storm sanitary.dwg.
How do I get rid of this error, without combining drawings, or promoting the surface to one or more drawings? Isn't this exactly what data references is made for?
When I open a raw file it automatically converts to a smart object. After processing and merging I am unable to print anything other than the original object. What might I be doing wrong?
is possible to retrieve the information of the reference in the iam file without open the file in session ? Opening with notepad the iam file, at the end of file, the references is contains in the planar text.
Is possible to retrieve documentation for this request ?
New install of LT2011. It has been working fine for a week. Now upon opening a drawing file, the first time I save the plan it immediately converts to Read Only file, therefore I cannot save my work.I have done one re-install with no fix.
I have been using CS2, and when I use the color picker to choose a color, the hex number is in lowercase. i.e # 00ccff, but in CS and 7 if you were to choose a color everything would be in caps. i.e. # 00CCFF,
Architecture 2009 running on Windows 7. Dell Precision T5400 with a Quadro FX570 graphics card.
I have lately been having some issues with text in Architecture 2009. I first noticed that within Mtext, when you hit the "UPPERCASE" or "lowercase" buttons, the text disappears in the editor, and no changes are made. Not the end of the world, but not handy.
Then it stopped letting me type in Mtext boxes at all. The return key seemed to work, but nothing else. Then it started converting text typed into Mtext boxes into (I think) Chinese characters. Really not handy. At this point I decided to try to reinstall. First I tried a repair, then reinstalled over the existing installation, then uninstalled completely and reinstalled from the disk. I've also done a windows restore, though as this has slowly been falling apart, I'm not sure when I should restore back to.
I have Mtext basic functionality back, but the "UPPERCASE" and "lowercase" buttons still make the text disappear.
Not sure if it's related, but I also get a Fatal Error e06d7363h at 758bd36fh about 4 or 5 times a day. Usually it's associated with the open command (ctrl+o), but sometimes it just happens at random.
I created an alignment style specifically to label typical sections. My label style includes a triangular symbol (XSM) and alignment reference text (XSL) attached to the symbol. The label attaches correctly to the alignment geometry points (POB and POE) but the alignment reference text which should call the alignment name instead shows three question marks. At no point in the process am I prompted to select an alignment which is as expected. The label should automatically populate with the alignment name. The label properties indicate the appropriate alignment as the reference object.
Civil 3D 2012 (64) Windows 7 Pro (64) SP1, 16 GB AMD Radeon HD 6900
Does the source file size impact the functionality of a surface data reference?
Case 1 I have a source dwg that has a single surface, Surface A, in it and is an overall small file size. Case 2 I have a source dwg that has Surface A as well as another 10 surface and the file size is HUGE.
When I data reference out Surface A from Case 1 versus Case 2 does the new drawing look back at the entire drawing or just the surface data to make sure the surface is up-to-date when syncing?
Is there a way to attach a reference file such as a pdf to an idw browser in R2013? There are many times we include torque specs, etc and it would be nice to include the catalog page or some reference to the original manufacturer specs.
Why would you Dref a Viewframe Group into another drawing?I wanted to cut P&P sheets (via layout tabs) in a new drawing. The sheets display fine, except that the plan view is an xref. I cannot move the matchline labels in the new P&P sheets because they are xref'd. Sure I could go to the parent drawing and move them, but that become tedious. I thought, why not Dref the viewframe group into the P&P sheet, that way I could move the matchline label to a new position. By new position I mean along the matchline itself, not to different stationing. It works but the sheet next and previous labels display #### (hashtags). The only workaround I can think of is to create the P&P sheets in the current drawing (parent), that way the matchlines would be live. I don't want to do that, I want just the alignment and profile of the P&P sheets I create to be dynamic, Xref everything else..
I am trying to create a label for fire hydrants in plan view that shows the flange elevation. I want the elevation to be 0.4' above the adjacent road profile. I added a reference text component to my label style that shows the profile elevation. Where would I find the expression for the profile elevation reference text?
I have a drawing when attached into another drawing, the coordinates have an exact 500,000 shift in the X value and an exact 200,000 shift in the Y value. Directely in the drawing, the coords are correct. They just won't attach correctly.
I can tell that this drawing was not created with the dwt we use (it is missing certain styles) - I wonder if the dwt could be to blame.
Also, I have been trying to figure the Map functions out with no guidance, I wonder if I somehow changed the attach settings to cause the shift.
AutoCAD Civil 3D 2012 Windows 7 64 bit Intel Core i5-2500K CPU @ 3.30 GHz 8.00 GB 64-bit
I have a sheet with labels on the TBC with station and elevation. If I plot the sheet everything shows up fine. If I publish to PDF, the elevation portion of the labels shows as ?
Having issues with Reference Manager - I can't add anything to it as it just goes into "Not Responding" mode and crashes? Is there a recovery/repair option for it?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design) Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD 16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
