I am using C3D 2012 SP3
When I create the matchlines in the create view frames command, the sheet numbers for next and previous
display ####. What is the problem? I have not created any sheets yet through the SSM.
When I create my sheet sets, where there is a curve in my alignment, there is a black space outside of the matchline. When I move the matchline closer to the end of the view frame, the black space gets smaller. Then I cannot acheive my overlap.
View 1 Replies View RelatedI want to extend sampleline along matchline for creating cross section view.I used Modify-extend in hometab, but it doen't work.
View 2 Replies View RelatedI have structures and alignments data referenced. If I assign the structures ref alignments in the dwg with the data refs for labeling, the next time I open the dwg the ref alignments are set back to none, causing the labels to be ?
It seems like this worked in the past?
I am getting this error in my production drawings.
My setup is as follows:
- EG.dwg has my existing surface in it. I create a data reference to use it in other drawings.
- Level One.dwg has the EG surface data referenced in, and I use this to create alignments, profiles, and finish surface. All of these are turned in to data references.
- Storm Sanitary.dwg has my pipe designs. I data reference in the two surfaces, profiles, and alignments, and create pipe networks. I create references for these networks.
- Plan Profile.dwg is the production sheet I'm getting this error from. Every one of my civil objects is data referenced in to this drawing. Everything is inserted correctly, the pipes show correct FG surface elevations for their rims, etc.
BUT when I open this drawing, I get this error. I assume it's because my FG surface is not directly in the storm sanitary.dwg.
How do I get rid of this error, without combining drawings, or promoting the surface to one or more drawings? Isn't this exactly what data references is made for?
How to reference the drawign sheet number using iLogic? I see on the snippets on the side a way to reference the sheet name, but I only want the number. To get the name it is ActiveSheet.Name, but ActiveSheet.Number does not work. Getting the name give something like ASSM:1, so if there was a way to take that and subtract the colon and everything before it that would work also. I am not a programmer, I've just taked some programs I found online and modified them a little to do what I want to do, but this is holding me back a bit.
Overall, I'm trying to modify the drawing view label to have a project number, referenced from the drawign iProperties, a view label, and sheet number, and then save that info in an iproperty of the part, and then reference that in the BOM so it automatically labels all of the views and fills out a column of the BOM to reference which page and view to find the parts of the assembly. I have everything working except for the sheet number.
I just opened up a project Sheet Set that i haven't worked on in a while, and all of my layout pages have a series of "#" in place of the fields. For example, the name of my viewport should read "Head Detail", which is the name given to that view in the Sheet Set Manager, but instead reads "##############". This also happens with my view numbers, callout bubbles, etc.
However, the information in my title block is still intact. For example, the Project Name, Client Name, Page Number, etc. all read the correct values.
I tried opening the drawings in Reference Manager, but I see no alerts or errors. I have had this happen before in previous versions going back to at least 2010, but they have always been small projects and I just recreated the views and callouts. This is a large project however, and redoing this will cost hours, if not days of extra work.
In examining the fields, it seems like the problem fields are those defined by the SheetSetPlaceholder Filed Name, and the Placeholder type is irrelevent; they are all broken. For other Field Names, for example CurrentSheetNumber, the references still work.
Is there a way to incude the sheet number that a drawing view has been moved to? I have an elevation tag that shows the view identifier, I am looking to have the sheet number referenced where I show "Field Text-Manual" in the attachments below. I am using inventor 2014.
View 1 Replies View RelatedHow people deal with multiple revisions of one sheet with sheet set manager, basically I want the cover sheet of drawings to have a list of drawings including the revision letter and revision date and on each individual sheet keep track of historical revisions
There is the current sheet revision and date fields.Does everyone usually just update these and manually keep track of historical revisions else where in there title block?
I was creating a new sheet set in the sheet set manager as I have created new drawings to be added to the old one. When I do this and browse to the directory of drawings, once I hit next it only wants to create a sheet with a few drawings in the directory. There are 22 drawings in the directory and is leaving out about 18 when it creates the sheet set.
View 2 Replies View RelatedI working on a project in Revit Architecture and I have the Mechanical (MEP) and Structural (Structure) models linked into my model. I need to reference a detail in the structural model/sheet set. Is there a way to do that without creating a false callout tag with linework?
View 1 Replies View RelatedI want to reference an idw sheet from one file into another idw file.
Purpose:To duplicate details from one drawing into another drawing without copying sheets from drawing to drawing.
This prevents changing the annotations of the original detail in files that have the same detail that someone may change.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
I created an alignment style specifically to label typical sections. My label style includes a triangular symbol (XSM) and alignment reference text (XSL) attached to the symbol. The label attaches correctly to the alignment geometry points (POB and POE) but the alignment reference text which should call the alignment name instead shows three question marks. At no point in the process am I prompted to select an alignment which is as expected. The label should automatically populate with the alignment name. The label properties indicate the appropriate alignment as the reference object.
Civil 3D 2012 (64)
Windows 7 Pro (64) SP1, 16 GB
AMD Radeon HD 6900
Does the source file size impact the functionality of a surface data reference?
Case 1 I have a source dwg that has a single surface, Surface A, in it and is an overall small file size.
Case 2 I have a source dwg that has Surface A as well as another 10 surface and the file size is HUGE.
When I data reference out Surface A from Case 1 versus Case 2 does the new drawing look back at the entire drawing or just the surface data to make sure the surface is up-to-date when syncing?
I have an offset style, offset based on a Reference Cogo Point and Aligment.
If I change to a difference style, the reference cogo point goes to "none".
I need to change to a Child style, but use the same cogo point.
Is there a way to keep the orginal Value (cogo point)?
When i am making e-transmittal i am getting the message warning Xref broken reference , what are the causes for this.
View 4 Replies View RelatedWhy would you Dref a Viewframe Group into another drawing?I wanted to cut P&P sheets (via layout tabs) in a new drawing. The sheets display fine, except that the plan view is an xref. I cannot move the matchline labels in the new P&P sheets because they are xref'd. Sure I could go to the parent drawing and move them, but that become tedious. I thought, why not Dref the viewframe group into the P&P sheet, that way I could move the matchline label to a new position. By new position I mean along the matchline itself, not to different stationing. It works but the sheet next and previous labels display #### (hashtags). The only workaround I can think of is to create the P&P sheets in the current drawing (parent), that way the matchlines would be live. I don't want to do that, I want just the alignment and profile of the P&P sheets I create to be dynamic, Xref everything else..
View 1 Replies View RelatedI was working on my project today when the window popped up telling me to reload my pavement file. When I reloaded the file, the reference said it was unresolved. I tried to open that file directly, but it would not open.
View 3 Replies View RelatedI am trying to create a label for fire hydrants in plan view that shows the flange elevation. I want the elevation to be 0.4' above the adjacent road profile. I added a reference text component to my label style that shows the profile elevation. Where would I find the expression for the profile elevation reference text?
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
I have a drawing when attached into another drawing, the coordinates have an exact 500,000 shift in the X value and an exact 200,000 shift in the Y value. Directely in the drawing, the coords are correct. They just won't attach correctly.
I can tell that this drawing was not created with the dwt we use (it is missing certain styles) - I wonder if the dwt could be to blame.
Also, I have been trying to figure the Map functions out with no guidance, I wonder if I somehow changed the attach settings to cause the shift.
AutoCAD Civil 3D 2012
Windows 7
64 bit
Intel Core i5-2500K CPU @ 3.30 GHz
8.00 GB
64-bit
I have a sheet with labels on the TBC with station and elevation. If I plot the sheet everything shows up fine. If I publish to PDF, the elevation portion of the labels shows as ?
View 1 Replies View RelatedHaving issues with Reference Manager - I can't add anything to it as it just goes into "Not Responding" mode and crashes? Is there a recovery/repair option for it?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I was so excited to hear about the new pressure pipe networks that I had to get into the software. What I have found is both promising, and a little bewildering. The promising aspects are that the pressure pipes appear to act and function effectively, and in a manner consistent with real world design that is easy to understand and use. Kudos to Autodesk!
That being said, I do have a couple of complaints. First, the pre-loaded fitting and appurtenance libraries are very limited when it comes to sizes and materials that are more commonly found in the land development arena I work in (8" PVC is our bread and butter). Hopefully, additional resources are forthcoming - they usually are.
Second, and more importantly, I can't figure out a way to data reference a pressure pipe network. If we can't data reference the pressure pipe network, then we really can't use them at all, which would be very disappointing.
I can create single alignment labels (fixed point, offset etc) that show a chainage and, by using reference text, a profile level for an associated profile.
However, using the main labels that are used for displaying chainages along an alignment (alignment chainage label group) I can also add in a reference text label for profiles here, alongside the chainage one, but there is no option to set which profile it references so it just displays '???'.
Getting the alignment labels to also display associated profile levels at every chainage point would be incredibly useful.
I have got the ole Program Errors Dialogue back again. It seemed to stem from a rogue data shortcut that got broken.
I could not delete the broken surface reference, so had to create another data shortcut, create a reference and then I had the opportunity to delete the rogue surface and then the data shortcut.
Anyway, I got this error on Audit. (see image attached)
and this was the audit command line dump...
Command: audit
Fix any errors detected? [Yes/No] : y
Auditing Header
Auditing Tables
Auditing Entities Pass 1
Pass 1 100 objects audited
AcDbDictionary(8AB)
XData String Length 260 > 255
Truncate to 255
AcDbDictionary(8AB)
could not be repaired.
Pass 1 30600 objects audited
Auditing Entities Pass 2
[Code]...
I may have made an error by importing a data shortcut I didn't need in past weeks on this job. When a data shortcut is broken, it is quite hard to remove the reference.
Anyway, perhaps I just need to upgrade but I don't want to do it for this curent project as I am almost finished. (famous last words).
So what is causing this error that cannot be fixed? I didn't ask foran Xdata string to exceed 255 characters...
I have a Surface that is data referenced into many different drawings. On one of the drawings, the reference will not show contours until I sync. It will show the boundary. Just one of them...but I can't use sheet set manager to publish drawings since I have to open it up and sync. Is there a setting we changed? The styles are all the same. The surface is on C-Surface, the boundary is on C-Surface, the Contours are on C-Surface-MJR, C-Surface-MNR.
View 2 Replies View RelatedI have points as reference blocks I want to convert them in to autocad points so than to convert them to Cogo points.how to covert block refernc point to autocad points
View 6 Replies View RelatedI am labeling structures and need to use the station & offset for the street alignment not the alignment for the pipe network. It works great for the station but the offset is not working properly. It reads 0 as though it's reading the alignment for the pipe network. I've tried copying a label and adding reference text, creating a new label from scratch, putting 2 pieces of reference text in (1 for the station & 1 for the offset), and just doing the offset in the reference text instead of the station & offset...none of those have worked.
View 5 Replies View RelatedI'm in a dwg that had broken references. I right clicked on Alignments to repair all broken references. Everything came in (surfaces, alignments, pipe networks) but text did not come in from a source drawing; the Source Dwg is a Pipe Network. The network came in but not the text. I opened the source dwg & the text is there. The Event Viewer is showing no broken references so what I'm I missing?
View 5 Replies View Relatedis there a way to stop the synchronization at the start? i would like to synchoronze manually later.
any system variables?
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
I have a drawing with multiple profiles. We originally had an existing and finished ground surface in the drawing, but decided to use a data shortcut to the surfaces as the design kept changing. We deleted the old surfaces from the drawing, and created the data references, using the same surface names for the new referenced surfaces.
The ground lines show up in the profile, but I can't get it to show the linetype I need for the EG surface (dashed). It doesn't act like a typical profile line - it now shows a lot of PVI points, and plinegen settings have no effect.