I attach x-ref in one of the drawing......and then next day i open drawing is show but xref does not not show and i gives that message..............
Error: Possible circular reference to current drawing. *Invalid*
what should i do?
i have this drawing which i created data reference to the wrong project in the wrong coordinate system and worked off that. then now i am trying to correct it. so i copied the dtm and did coordinate transformation and got that right. now the model drawing is still linked to the original dtm from the other project folder.
if i remember right back in 2007 version there was a completely built in shortcut editor which allows you to change the path in current drawing. now it's all greyed out. there is no access. so is there a way to bypass this? probably pretty common thing to do. say you want to try different version of the same object to try your design just swap it back and forth.
They should make a right click button on the data shorts in current drawing and says "browse data reference" not show up when only broken reference occurs.
one way i can think off now is copy the files to local. disable network drive, then let it broken reference show up then browse to desktop one then delete desktop one and hopefully it get the broken reference again and not look for the very original one. i think it's probably gonna do that, there is some "hidden" thing stored in the object to point to the original path which not available to users.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
Is there a macro/script/deisel that will automatically print a pdf (cute pdf autocad lt 2007) to current plot settings in current drawing directory and give it the current drawing view name and number? Disk space not a problem these days and would save time to have a pdf copy of all drawing tabs readily stored in the directory ready for issue.
View 3 Replies View RelatedI am getting this error in my production drawings.
My setup is as follows:
- EG.dwg has my existing surface in it. I create a data reference to use it in other drawings.
- Level One.dwg has the EG surface data referenced in, and I use this to create alignments, profiles, and finish surface. All of these are turned in to data references.
- Storm Sanitary.dwg has my pipe designs. I data reference in the two surfaces, profiles, and alignments, and create pipe networks. I create references for these networks.
- Plan Profile.dwg is the production sheet I'm getting this error from. Every one of my civil objects is data referenced in to this drawing. Everything is inserted correctly, the pipes show correct FG surface elevations for their rims, etc.
BUT when I open this drawing, I get this error. I assume it's because my FG surface is not directly in the storm sanitary.dwg.
How do I get rid of this error, without combining drawings, or promoting the surface to one or more drawings? Isn't this exactly what data references is made for?
I want to insert another drawing layout tabs contents in current drawing.
It's easy for MODEL tab, but for LAYOUT tabs, I dont know how!?
I prepared a code for INSERTING MODEL tab in current drawing:
(defun INS_DWG (TAB path dwg P / blk)(setq blk (strcat ""*" path dwg """));(setq N (vla-get-count (vla-get-layouts)));;Number of LAYOUT TABS in dwg(if (or(= TAB 0) (= TAB nil))(command "INSERT" blk P 1 0)); TAB=0 or omitted ==>Insert MODEL;(if (= TAB 1));==>Insert the 1st LAYOUT in dwg file;(if (= TAB 2));==>Insert the 2nd LAYOUT in dwg file;and so on....);;;usage:;;(INS_DWG 0 "c:\test\" "test.dwg" '(0 0))
I'm trying to use the default timeline's current time inside an if-statement's validation code (the code itself being inside a symbol), but I can't seem to find a way to reference the default timeline's current time.
My code would be something along the lines of this:
(upon clicking the buttton)
if (default timeline > 1 second and default timeline < 6 seconds)
{
play default timeline at 6 seconds
}
else if (default timeline > 6 seconds and < 11 seconds)
{
play default timeline at 11 seconds
}
etc...
I'm running Autocad 2013 Civil 3d, when I open a particular drawing the cursor turns to a circular shape as if it is downloading something, but it is actually not loading anything. This circular cursor does not let you do anything with the drawing, you just have to keep hitting esc until it gives you a fatal error message that says "FATAL ERROR: Cannot write to undo file (probably disk full)" and it kicks you out of autcad. How to get rid of this ciruclar cursor?
View 6 Replies View RelatedI am trying to find out what the current DimStyle of the drawing.
I have iterated through all DimStyle but can’t find any way of finding the current Style.
For Each DsrID In DST Dim R As DimStyleTableRecord = CType(DsrID.GetObject(OpenMode.ForRead), DBObject) Debug.Print(R.Name)Next
API enhancement/fix in SP1: Cannot create a radius dimension on circular drawing curves projected from spline edges.Does it in some way trying to refer to the issue with nonplanar arcs turning into splines in drawings saved-as AutoCAD .DWG?
View 3 Replies View RelatedHow can i get number of layout in the current drawings?
View 3 Replies View RelatedHow to save current drawing file using save method.
View 3 Replies View RelatedI am using vb.net and I need to find the directory path that my current or open drawing is located in. I'm not sure how to get this from vb.net.
View 4 Replies View RelatedI am new to .net. how to get a list of the xrefs in the current drawing?
View 2 Replies View RelatedI am trying to write a quick macro to open the current drawing in the block editor. I can easily do the steps from the dialog box to open the current drawing, but the command line version give me an error.
Command: -bedit
Enter block name or [?]: <current drawing>
(A message box pops up saying, "The name cannot be longer than 255 characters."
If I click ok on the message box, AutoCAD returns to model space. The file name is 30 +/- characters, and the path is maybe another 50 to 100 characters. Can I bedit the current drawing using the command line, or must I use the dialog box?
LT, C3D 2005 - 2014
XP, Vista, 7
Is that possible to get the current Project number and Drawing by using some vba code?
View 2 Replies View Relatedis there a way to set the command "acdnavigate" to the current drawing folder?
View 1 Replies View RelatedI am writing a program acts on the current drawing by using data in the SSM. If the current drawing is found to be a member of a sheet set (using sysvar SSFOUND) it cycles through all the sheet in the sheet set looking for a sheet entry that matches. Sometimes a match is not found because the layout name in the SSM does not match the layout name in the current tab (sysvar CTAB). Is there a more directly way...and one that works? I just need a reliable way to get the AcSmSheet object the correlates to the current drawing.
View 5 Replies View RelatedIf I have multiple drawings open in AutoCAD 2012 does the autosave function only apply to the current drawing open or does it apply to all drawings ?
View 2 Replies View RelatedI need to get list of all block reference in a drawing without iterating through all entities in the drawing.
View 7 Replies View RelatedPrivate Sub UserForm_Initialize() Dim layerColl As AcadLayers Dim entry As AcadLayer Dim LayList As String Set layerColl = ThisDrawing.Layers For Each entry In layerColl ComboBox1.AddItem entry.Name Next End Sub
I have a form with a combobox. That combobox is filled up with all layers in a drawing. (see above)
Now I want to make the layer that I have selected (value) in the combobox the current layer in my drawing.
How can i make it current?
I need simple code to do just one thing, inserting a dynamic block that is stored in a separate file on my computer (like C:/base/b-22) in the drawing that I'm currently using. For example, I have a windows form with a list box with names of many dynamic blocks that are stored on my c drive, I would like to pick a block with a name and upon a click event of a button or other will go get this block from a separate file and insert it in the drawing I'm currently using, and would need to be able to pick the point of where I want the block to go. I'm using autocad 2010 with visual studio 2008- using the new autocad .net language.
View 9 Replies View RelatedI know you can "pull" styles from a drawing (maybe the template) into your current drawing.
Is there a way to "push" them from the current drawing to another on?
Here is what I am picturing:
Right click on a style on the settings tab and choose "Send to Template"
"Template" would either be a predefined DWT file or it would open a standard file selection dialog to select one.....and this would copy the selected style into the template.
I'm trying to automate an attribute extraction in the form of a table. I create the .dxe file but when I use this template file with -eattext (or -dataextraction), in a drawing different than the one the .dxe was created in, I still get the original table and not the one with the attribute values of the curent drawing.
View 4 Replies View RelatedWe often have drawings with multiple sheets.Usually the first couple of sheets are devoted to identifying components and where they should be placed. The remaining sheets provide details on specific components (dimensions, tolerances, etc.).
It would be nice to be able to reference (associatively) other sheets, so it is easy to find information on a component when looking through the drawing package. For example, add a note that says "See sheet 12", and have the 12 update if that sheet (or drawing view?) changes location in the package.
When I set a layer as current, every object or line I select in the drawing appear to be on that layer in the toolbar. Although in the properties toolbox, I see that the line I selected is still on the right layer.
I can't work in paperspace either, when I freeze a layer it freezes all objects. It seems like whenever I give a different layer to an object, it attributes to all object that same layer.
When I open the same drawing in acad 2008, everything is ok, the objects have the proper layers.
Is there a command for that or it's an acad 2013 problem?
i have a for example a block with one attribute and would like add a new attribute. i´m trying to read the current block and redefine - it comes a new attribute in propertieswindow but not graphical.
(defun c:ent () (setq bn (getstring "
give a block name ")) (setq bez (getstring "
give a attribut name ")) (entmake (list (cons 0 "BLOCK")(list 10 0 0 0)(cons 2 bn)(cons 70 2))) (setq fe (entmakex (list (cons 0 "CIRCLE") (cons 8 "0") (cons 10 '(0 0 0)) (cons 40 1)))) (entmake (list (cons 0 "ATTDEF") (cons 8 "0") (cons 10 '(0 0 0)) (cons 11 '(0 0 0)) (cons 40 1) (cons 1 bez) (cons 3 "TOP") (cons 2 "NAME") (cons 70 0) (cons 73 0) (cons 50 0) (cons 41 1) (cons 51 0) (cons 7 "STANDARD") (cons 71 0) (cons 72 0) (cons 210 (list 0 0 1)) (cons 74 0) (cons 62 256) (cons 39 0) (cons 6 "BYLAYER"))) (entmake (list (cons 0 "ENDBLK")(cons 8 "0"))) (entdel fe) (entmake (list (cons 0 "INSERT")(cons 2 bn)(cons 10 '(0 0 0))(cons 66 1) (cons 62 256) (cons 39 0) (cons 6 "BYLAYER"))) (entmake (list (cons 0
[code]....
I was looking for a way of counting blocks inserted in my current drawing.
F1, brings up HELP.
In the search box i type BLOCKS.
Results =
Overview of Hatch Pattern Definitions
Create a Shortcut Menu
Overview of Shape files
Overview of slides
Work with User Interface Elements
Multiple Drawing Folders
how to write a field that will add or subtract one from the drawing number. I'm adding drawing join line text to drawings so I need the text on the left to read one less than the current drawing & text to the right to read one more.
in drawing 005 text would read "joins drawing 004" & "joins drawing 006"
This is the field for file name (drawing number)
%<AcVar Filename f "%fn7">%
Any way to adjust this to add or subtract one?
I have been trying to use the tcase command to change text case on a current drawing. some of the text is listed in properties with :A1 and various other squares and ( etc .). Any way to change this text. When I try exploding it and changing to mtext the fractions and all parts of the text is exploded as well.
View 9 Replies View RelatedIs there a quick command that lists all current frozen layers in your drawing? I am using Autocad 2012. We recently switched from 2006 in which the quick command YT would show all frozen layers and allow you the option to thaw them. We were using ArchT so Im not sure if that was something associated with that.
View 1 Replies View RelatedI am unable to fill objects with any sort of hatch in my current drawing. Other drawings are fine, but in this one, nothing will hatch, either form the tool palettes option or from the hatch menu.
View 7 Replies View Related