AutoCAD 2013 :: Solid Fill Not Displaying In Viewport?

Jan 9, 2014

I'm finding a problem with solid fill, drawn in model space its fine, but viewed through a viewport and all I see is the outline of it in wireframe.

I'm not having this problem on other drawings, it's limited to this file, but a colleague has also had as well it so not my workstation. This narrows it down to this specific drawing being the problem.

As regards variables, FILL = 1, FILLMODE=1.

It is just solid objects with the problem, polylines with a width display OK as does fill text.

View 2 Replies


ADVERTISEMENT

Photoshop :: Displaying Solid Fill Layers As Transparent

Jul 25, 2013

I'm having technical issues with Photoshop CC, it is displaying solid fill layers as transparent, even though they are showing up correctly as solid fill layers in the layers panel.

View 5 Replies View Related

AutoCAD Map 3D :: 2013 - Solid Fill Partially Prints?

Nov 7, 2012

This drawing only consists of Data Connected .shp files. The polygon styles all have a different color solid fill. Transparencies are set differently for each. I thought that may have been an issue because the two layers that plot good every time are set to zero, but another layer that plots bad is also set to zero.

To give you a visual, my drawing indicates the entire state of Michigan (UP & LP) with the Great Lakes. Layout tab 1 shows the entire drawing in landscape orientation. Layout tab 2 is rotated counter-clockwise and zoomed in on the LP. Layout tab 2 is where my problem occurs. The plot indicates a chunky diagonal area through the state showing the color & line content, but the remaining area within the state is blank. Comparing two bad prints, I realized that even though the diagonal area prints on both, they have slightly different "coverage". They also plot different lines in different locations. Why would rotating the viewport cause a problem like this!?

The plot preview displays correctly though.

Plotting from the model space works fine. Why won't it work in paperspace?

View 3 Replies View Related

AutoCAD 2013 :: Create Viewport Of Solid In Layout And Dimension Inside And Outside Diameters

Aug 8, 2012

Having trouble with diameter and radial dimensions since upgrading to 2013.

For example, draw two concentric circles and Presspull (or Extrude and Subtract) so that you get a hollow cylinder.  Then create a viewport of this solid in a layout, and try to dimension the inside and outside diameters.

One of the two dimensions will work properly (seems to vary which one).  The other will magically "jump" when placed (ex. the OD dimension will jump and become the ID, or vice versa).

How to resolve this?  Our guys are having to do absurd things like redrawing the circle in paper space and dimensioning to it with a scale factor.  Is this some sort of 2013 bug, or a setting?

Inventor 2013
Windows 7 64 Bit

View 9 Replies View Related

AutoCad :: Hatch Displaying As Solid?

Jan 22, 2012

I have a hatch (that is not solid). Sometimes it displays as a solid hatch though, although if I move the hatch (even slightly) the display issue is resolved and the hatch displays properly (i.e. not solid anymore). Regen doesn't fix the display issue, only moving the hatch slightly (temporarily).

I'm not sure how far away from the origin the hatch is although it is no further than what it would normally be when it works fine (and it can't be moved closer to the origin anyway as that would screw up my models real world coordinates).

View 9 Replies View Related

AutoCAD Architecture :: Text Not Displaying In Viewport On Sheet

Jun 16, 2011

I am using ACA 2012 and when I insert a view into a sheet, the text and dimensions in the view do not display. I have checked the view and the text and dimensions are on layers that should display in the sheet. The layers are on and thawed in the viewport on the sheet, but do not show up. I have turned on all layers and only the model (building information) shows, no text or dimensions.

View 2 Replies View Related

AutoCad :: Viewport Clipping Boundary Still Displaying When Set Not To Print?

Nov 28, 2011

I had several rectangular viewports created which resides on the vport layer that is set to not print. I wanted to convert these viewports to a clipped polygonal vewport. I drew the polyline and clipped the viewport to that object and it worked for most of them.

If I had moved my polyline/object I was to clip the viewport into onto the vport layer before clipping, the process worked fine and the viewport border would not print. However if I had the polyline object border on layer 0 and then clipped the viewport, the viewport border (even though still on the vport layer set to not print) would then print/not display.

This time it was only a couple of viewports which I manually recreated, although for future reference is there a fix/trick to get around this if one forgets to move the polyline to be clipped onto the vport layer first before clipping?

View 4 Replies View Related

AutoCAD 2013 :: Converting Complex Solid Surface To Solid Model

Aug 12, 2013

I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?

View 3 Replies View Related

AutoCAD 2013 :: Trim A 3d Solid Using Another 3d Solid As A Cutting Edge?

Aug 27, 2013

Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.

View 3 Replies View Related

AutoCAD Civil 3D :: Creating Points Displaying Cut / Fill Depth Between Two Surfaces?

Oct 18, 2013

I created a volume surface between the as-built and design surfaces, now I would like to show the points that display the cut/fill depths between these two surfaces.  I tried modifying the surface property of that volume surface but doesn't seem to offer what I want. 

View 6 Replies View Related

AutoCAD 2013 :: Hatching Looking Solid But Its Not A Solid Pattern

Dec 13, 2012

i am having a hatching issue, it seems no matter what hatch pattern i use and what hatch scale, alot of the hatch looks solid instead of the pattern i want, for example i am using currently ANSI37 @ Annotative with a scale of .20 and on the same paperspace page one plan with the hatch shows the cross hatching and the other one below looks solid (see attached) now i can go and say change the hatch scale and it reverts to the cross hatching, but then when i zoom out it goes back to "solid" is it a graphical issue?

View 7 Replies View Related

AutoCad 3D :: Solid Editing In Viewport

Apr 25, 2013

Using Autocad MEP 2013. I discovered a potentially powerful way to model today by utilizing a large paperspace template with multiple viewports. Rather than creating and editing my model in model space, where managing multiple layers and views becomes very cumbersome (plus, model space gets kind of messy with section views and ordinate dimensions and such), this allows me to keep all of my layers "on" in model space, but to customize each VP with the specific layers I want to see while editing. I LOVE the layer isolation feature, which unclutters the model even more for editing and I just figured out how to configure it for VP isolation only. In conjunction with the newly discovered (I'm a little slow) "maximize viewport" tool, it is just like I am working in model space (right down to the black background, which I prefer). I was ecstatic to unleash the power of editing 3D entities by isolating them in a VP. However, there appears to be a glitch of some kind. I cannot face edit my solids. At first, it thought the entity was on a locked layer, which it wasn't (I could move the solid, just not edit a face), so I unlocked ALL layers. Then it gave me this message when attempting to edit: "No loop through new edges and vertices", which I have no idea what it means. But most of the time it simply won't select the solid for editing. It doesn't matter if I maximize the VP or not. When I go into model space from the MODEL tab and isolate the layer of the object I want to edit, it works just fine.

View 2 Replies View Related

AutoCad 3D :: Solid Fill Between Surfaces

Mar 15, 2013

I have a model where i need to make a solid fill between some surfaces to get a solid 3D model.

I have attached the a pic of the drawing showing where i want to fill. I have tried using LOFT but it doesn't fill or it creates a solid cone instead. The thing i need is the "negative" for a cone. I have also tried to use Shell after LOFT created a cone, but that didn't work either.

View 5 Replies View Related

AutoCad :: Solid Fill Not Working?

Aug 27, 2012

while i open any cad files, its solid fill is needs to get enabled each time i open each files. is ther anyway to keep the solid fills remains on.

View 9 Replies View Related

AutoCAD Architecture :: Unable To Update The Solid Fill?

Jul 20, 2007

Suddenly I can't use Solid hatch. I tells me "Unable to update the solid fill" when I try to change a hatch pattern to Soild. And when I try to Hatch with Solid it tells me "Unable to fill the boundary with solid". I'm hatching a basic PLine Rectangle (all corners joined). Worked fine yesterday.

View 4 Replies View Related

AutoCad :: Adding Transparency To Solid Fill Areas

Aug 28, 2012

providing a fantastic resource for all ACAD users, of all abilities.

I would like to know if it is possible to turn a solid fill area into a transparent appearance.

This is in a 2D drawing.

View 9 Replies View Related

AutoCad :: Gradient Does Not Work - Unable To Fill The Boundary With Solid

Dec 14, 2012

When I try to fill a figure using gradient i get: "Unable to fill the boundary with solid." But when I try to fill the figure using hatch I get it to work. The problem is I want to use gradient.

View 1 Replies View Related

AutoCAD 2013 :: 2013 Layer Viewport Color Overrides Not Changing

Feb 15, 2013

Trying to change the color of a layer in a viewport (different than the default layer color (i.e. model layer color)). Objects are set to bylayer.  Changing the VP color in the layer dialog brings up the color dialog, select a different color, click OK and the VP Color DOESN"T change in the layer dialog. It stays at its previous color.  Occurs on several machines.

View 9 Replies View Related

AutoCAD 2013 :: 2013 Viewport Scale Control?

Dec 28, 2012

My units are set to decimal. In acad 2004, the dropdown list showed options like 1"=50'    In 2013, it shows options like 1/32"=1'-0"   How can I get it to display such as 1"=50' like before?

View 2 Replies View Related

3ds Max :: Solid Viewport Color Background As Default

Jul 11, 2013

In Max 2014 my files are opening with the gradient an the viewport background. How can i change that so the default is the solid color instead of the gradient? 

View 4 Replies View Related

AutoCAD 2013 :: Attribute Text Not Displaying?

Dec 27, 2012

They have one file xrefed into another but the text is not showing up. It is a block and the text is an attribute - but it is exploded.

I have attached 2 images - the first one - of the original file the second - where it is xrefed into another file with the text missing.

View 4 Replies View Related

AutoCAD 2013 :: Quick Properties Box Not Displaying?

May 14, 2012

I am having trouble with getting the quick properties box to display.  I have turned the feature on at the bottom taskbar, and tried Ctrl+Shift+P, and changed settings so that it displays to the top-right of the cursor, but I get nothing when I select any object.  It used to work on 2012 but not now. 

View 8 Replies View Related

Photoshop :: Fill Layer Solid Color Question

May 12, 2006

I dont get it, why are my prushset colors converted to grayscale when i use "Fill leyer solid color" on my selection. For example, i'll click on yellow, and it will just give me a different shade of the grey. i can only use grayscale colors in my new "selection filled leyer", how do i anable the colors again?

View 2 Replies View Related

Illustrator :: Fill Object With Solid Color With Lines Through It?

Oct 9, 2012

I have a vector map of the United States that I am currently trying to shade in for the election. I would like to achieve an effect similar to that shown here with the lines going through the red and blue states -  [URL] How would I go about doing that? I'm a novice at Illustrator and only know the basics of filling with solid colors. I have CS6 if that makes a difference.

View 2 Replies View Related

AutoCAD 2013 :: Displaying Number Of Entry Block

Dec 25, 2012

In block attribute manager i can see the number of instances of the selected block in the current drawing. Can I set this value in the field?

View 4 Replies View Related

AutoCAD Civil 3D :: Alignment Labels Not Displaying 2013?

Jan 15, 2013

The major and minor station alignment labels keep disappearing in my drawing.  I've had some luck by removing and re-adding the labels but this has stopped working.  Is this an issue that will be resolved by Service Pack 1?

View 3 Replies View Related

AutoCAD 2013 :: Displaying File Name On Plotted Drawings

Oct 3, 2012

Any way to have the file name of a drawing printed somewhere on the drawing when plotting drawings?

View 5 Replies View Related

AutoCAD 2013 :: Some Error In Displaying Dwg Preview While Loading

Apr 29, 2012

While loading any dwg file in autocad 2013, the preview is wrongly showing after select some shortcut file in same dwg folder. and its not back to the dwg preview. its only happen in window 7 machines only.

View 6 Replies View Related

AutoCAD 2013 :: Displaying Chinese Character On DWG Files

Nov 19, 2012

I am currently in urgent need to open an autocad file (.dwg) that has Chinese characters in it, but no matter I tried to download many different .shx fonts I still couldn't get it displayed.

I tried to talk with the maker of the file, but for some reason and addition with my poor Chinese language, I cannot get him understood what I need him to do (send me the .shx files). I am attaching the .dwg file.

View 1 Replies View Related

AutoCAD Map 3D :: 2013 Labels Not Displaying When Plotting / Exporting

Jun 27, 2013

I've searched this Discussion Groups area on the site and have found a couple solutions. I've tried them all but I can't seem to figure out how to get ALL of my labels to display when I plot or when I export to PDF. It seems that only the POLES layer labels are having trouble showing up...

I understand scaling and it doesn't seem to be the issue. I've tried plotting under different scales, and I still get the same thing.I've attached an image showing the outcome.

On the left is the PRINT PREVIEW in AutoCAD.
On the right is the EXPORTED PDF.

I've checked in the administrator under POLE LABELS, and changed a couple things around but I can't seem to get the pole labels to show up.

View 3 Replies View Related

AutoCAD 2013 :: Command Line Not Displaying All Information?

Mar 14, 2013

When programming in Autolisp, I like to view the values set to my variables so you type an exclamation point followed by the variable name on the command line to have it display the value.    My command line will not display the value.  I have to hit the F2 key to bring up the text window to view it. how to get the command line to view this information?   We have other computers that show it, but mine will not.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved