I have a model where i need to make a solid fill between some surfaces to get a solid 3D model.
I have attached the a pic of the drawing showing where i want to fill. I have tried using LOFT but it doesn't fill or it creates a solid cone instead. The thing i need is the "negative" for a cone. I have also tried to use Shell after LOFT created a cone, but that didn't work either.
I need to know how to make a solid from various surfaces. For example, making an exploded box back into a solid. I can't simply loft the surfaces because the problem I'm working on is far more complex-- it is a submarine defined by surfaces, but I need it all to be one solid.
View 4 Replies View RelatedI have two .dwg files that represent two different surfaces. I would like to import each .dwg file into Inventor, then create a solid with the original surfaces serving as the top and bottom. I can send the .dwg files if necessary.
View 9 Replies View RelatedURL....However when I try to export to .STL it won't do it because it is only surfaces and not a solid.I have searched everywhere on how to convert from surfaces to a solid but nothing I have tried has worked.
View 8 Replies View RelatedI'm having trouble creating a solid from different surfaces.
I already tried the surface stick, but it seems that it is still not a solid. (How can I check this?) The part is still yellow. If I try to apply the sculpt feature it says:
Modeling failure: A valid body cannot be constructed based on the selected inputs.
It 's a quiet complex shape. You find here: [URL].....
Is it possible applying textures on solid surfaces in AutoCAD 2012?
If yes, how do I apply textures on them?
I've just started learning AutoCAD and came across my first obstacle I don't know how to work around. Here's what I'm trying to do.
I draw two lines and two circles and then trim the excessive parts as in the picture (in general it can be an area composed of various types of lines, straight lines, arc, and likely with rounded corners).
Then extrude to the height 2. This makes 4 surfaces (green). Now I build a solid 'around' the surfaces. In this example I draw a rectangle and extrude to the height 1 (red). And my question is: how do I remove the part of the solid that's enclosed within the green surfaces? Subtraction doesn't work as I don't subtract solid. Slicing doesn't work either as it's more than one surfaces. For the same reason I can't turn it into a solid.
acad02.jpg
Basically I have drawn some lines, arcs and splines in the 3D space, then I created surfaces between these lines, arcs and splines, thus I created an 'object' which is defined by all these surfaces.
And what I want to do now is to fill up the empty space and basically convert it into a 3D solid object.
Another example would be a loft 'object', and it creates only a surface, so may I somehow fill up the empty space and turn it into an object?
Drawing2.dwg
I'm working on a project, and I need to make this collection of surfaces into a single solid object. I tried using sculpt, and after a few hours of trying to find the leak, I have failed. not watertight.
Also, I need to get this thing to a cnc mill, and they keep asking me for 2d drawings, dimensions, and tolerances. I assumed the 3d file would be good enough. How to make a file ready for a cnc, and how to make 2d drawings without putting 600 measurements all over the image? Every time I try to do a 2d object, the whole thing is a mess.
I created a volume surface between the as-built and design surfaces, now I would like to show the points that display the cut/fill depths between these two surfaces. I tried modifying the surface property of that volume surface but doesn't seem to offer what I want.
View 6 Replies View Relatedwhile i open any cad files, its solid fill is needs to get enabled each time i open each files. is ther anyway to keep the solid fills remains on.
View 9 Replies View RelatedSuddenly I can't use Solid hatch. I tells me "Unable to update the solid fill" when I try to change a hatch pattern to Soild. And when I try to Hatch with Solid it tells me "Unable to fill the boundary with solid". I'm hatching a basic PLine Rectangle (all corners joined). Worked fine yesterday.
View 4 Replies View Relatedproviding a fantastic resource for all ACAD users, of all abilities.
I would like to know if it is possible to turn a solid fill area into a transparent appearance.
This is in a 2D drawing.
This drawing only consists of Data Connected .shp files. The polygon styles all have a different color solid fill. Transparencies are set differently for each. I thought that may have been an issue because the two layers that plot good every time are set to zero, but another layer that plots bad is also set to zero.
To give you a visual, my drawing indicates the entire state of Michigan (UP & LP) with the Great Lakes. Layout tab 1 shows the entire drawing in landscape orientation. Layout tab 2 is rotated counter-clockwise and zoomed in on the LP. Layout tab 2 is where my problem occurs. The plot indicates a chunky diagonal area through the state showing the color & line content, but the remaining area within the state is blank. Comparing two bad prints, I realized that even though the diagonal area prints on both, they have slightly different "coverage". They also plot different lines in different locations. Why would rotating the viewport cause a problem like this!?
The plot preview displays correctly though.
Plotting from the model space works fine. Why won't it work in paperspace?
I'm finding a problem with solid fill, drawn in model space its fine, but viewed through a viewport and all I see is the outline of it in wireframe.
I'm not having this problem on other drawings, it's limited to this file, but a colleague has also had as well it so not my workstation. This narrows it down to this specific drawing being the problem.
As regards variables, FILL = 1, FILLMODE=1.
It is just solid objects with the problem, polylines with a width display OK as does fill text.
When I try to fill a figure using gradient i get: "Unable to fill the boundary with solid." But when I try to fill the figure using hatch I get it to work. The problem is I want to use gradient.
View 1 Replies View RelatedI'm having technical issues with Photoshop CC, it is displaying solid fill layers as transparent, even though they are showing up correctly as solid fill layers in the layers panel.
View 5 Replies View RelatedI dont get it, why are my prushset colors converted to grayscale when i use "Fill leyer solid color" on my selection. For example, i'll click on yellow, and it will just give me a different shade of the grey. i can only use grayscale colors in my new "selection filled leyer", how do i anable the colors again?
View 2 Replies View RelatedI have a vector map of the United States that I am currently trying to shade in for the election. I would like to achieve an effect similar to that shown here with the lines going through the red and blue states - [URL] How would I go about doing that? I'm a novice at Illustrator and only know the basics of filling with solid colors. I have CS6 if that makes a difference.
View 2 Replies View RelatedWhich tool would be used to draw a small pyramid and fill with a solid color?
How could I rotate this pyramid 45 degrees?
step 1) I remove the background of my image with the color to alpha method, isolating the part of the image i want.
step 2) I then use color select tool to select all the transparent area that was left behind from step 1.
step 3) I create a new layer.
step 4) Then I use the bucket fill tool to fill in the area on the 2nd layer that was selected in step 2.
This is where I run into trouble. On some pixels where the color filling meets dotted line area (made by color select tool) the color comes out translucent. I don't want this to happen. I want it to be solid ff00ff (color hex) without the random reductions in opacity.
I'm working with sprites and the emulator i use has ff00ff as transparent. I'm getting random pink color coming out of the edges of my sprites. These little specks of pink should not be appearing in game because it is supposed to be read as transparent. i suspect that these specks coming out are related to these translucent hiccups made in gimp.
I am trying to create logo's as blocks to insert into title blocks efficiently. I made the outline of the first logo and hatched it as a solid hoping it would print as a flat black but it is showing up as streaky, almost as if I used a different hatch at an extremely small scale. I don't think it is a printer issue because even when printed to .pdf format it still shows up as streaky.
View 1 Replies View RelatedI would like to create a wavy line (the zigzag feature is not exactly what I need here) to outline a shape and then fill it with a solid color.
This is approx what I want; however the undulation needs to be more round and less peaked.
We have this need to have all of the solids in a drawing to be placed in the "solid" layer.
Sometimes folks are drafting lines to develop these solids, and keeping the lines on the "solid" layer, rather than moving them to another layer, or deleting them altogether.
I could get folks to run this command before leaving the drawing.
I'm thinking something along the lines of:
Select all entities that are on the solids layer that are not solids.
If nil, great, do nothing.
If entities are selected, let me do something with them.
I'm hoping the following can be modified ever so slightly.
(setq non_solid (ssget "X" (list (cons 0 "3DSOLID")(cons 8 "solid"))))
I'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
I have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
View 3 Replies View RelatedHow can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies View RelatedIs there away to trim the diagonal 3d solid to the top of the horizontal 3d solid in the picture.
View 4 Replies View RelatedI am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).