AutoCAD 2013 :: How To Make Collection Of Surfaces Into Single Solid Object
May 5, 2013
I'm working on a project, and I need to make this collection of surfaces into a single solid object. I tried using sculpt, and after a few hours of trying to find the leak, I have failed. not watertight.
Also, I need to get this thing to a cnc mill, and they keep asking me for 2d drawings, dimensions, and tolerances. I assumed the 3d file would be good enough. How to make a file ready for a cnc, and how to make 2d drawings without putting 600 measurements all over the image? Every time I try to do a 2d object, the whole thing is a mess.
View 5 Replies
ADVERTISEMENT
Oct 14, 2013
If I modify a 3D solid and it is left with two seperate pieces it is still one solid piece, even though there are two parts. My question is: What if only need one of those two sides? If I explode the object and delete the one side I cannot change the remaining object into a 3D solid. It remains as surface object.
How can make an object into a 3D solid after exploding it? I belive there is a simple command like union or some other but I can't remember.
View 3 Replies
View Related
Jul 9, 2012
I need to know how to make a solid from various surfaces. For example, making an exploded box back into a solid. I can't simply loft the surfaces because the problem I'm working on is far more complex-- it is a submarine defined by surfaces, but I need it all to be one solid.
View 4 Replies
View Related
May 10, 2012
Basically I have drawn some lines, arcs and splines in the 3D space, then I created surfaces between these lines, arcs and splines, thus I created an 'object' which is defined by all these surfaces.
And what I want to do now is to fill up the empty space and basically convert it into a 3D solid object.
Another example would be a loft 'object', and it creates only a surface, so may I somehow fill up the empty space and turn it into an object?
Drawing2.dwg
View 9 Replies
View Related
Jan 25, 2014
I mistakenly created a collection when only one file was highlighted. I made another collection with all the other files I wanted in it, but I can't drag that one file from the filmstrip..
View 4 Replies
View Related
Sep 19, 2012
I'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
View 4 Replies
View Related
Jan 23, 2013
Creating object in 3D solid? The circles have the same height in both edges.
View 6 Replies
View Related
Dec 1, 2006
How can i convert some solid bodies to a single solid.
View 8 Replies
View Related
Jun 7, 2012
I want to access the solid opened in AutoCAD from dwg file using C++ and Object ARX.
View 3 Replies
View Related
Mar 16, 2013
I have a bunch of points that I am trying to turn into a solid object. I am doing this by using the 3D poly command and then LOFT, UNION and CONVTOSOLID. this has previously worked well, but this time when I use the LOFT command it does not produce a 'closed' surface, but rather a grid like surface which wont convert to a solid. Are there different settings for the LOFT command, and if so, How do I change them to produce a closed surface?
View 4 Replies
View Related
Mar 15, 2013
I have a model where i need to make a solid fill between some surfaces to get a solid 3D model.
I have attached the a pic of the drawing showing where i want to fill. I have tried using LOFT but it doesn't fill or it creates a solid cone instead. The thing i need is the "negative" for a cone. I have also tried to use Shell after LOFT created a cone, but that didn't work either.
View 5 Replies
View Related
Jan 10, 2013
I have two .dwg files that represent two different surfaces. I would like to import each .dwg file into Inventor, then create a solid with the original surfaces serving as the top and bottom. I can send the .dwg files if necessary.
View 9 Replies
View Related
Oct 11, 2013
URL....However when I try to export to .STL it won't do it because it is only surfaces and not a solid.I have searched everywhere on how to convert from surfaces to a solid but nothing I have tried has worked.
View 8 Replies
View Related
Sep 6, 2012
I'm having trouble creating a solid from different surfaces.
I already tried the surface stick, but it seems that it is still not a solid. (How can I check this?) The part is still yellow. If I try to apply the sculpt feature it says:
Modeling failure: A valid body cannot be constructed based on the selected inputs.
It 's a quiet complex shape. You find here: [URL].....
View 3 Replies
View Related
Jun 5, 2012
Is it possible to merge two or more adjascent / overlapping surfaces into a single surface?Is it possible to "Delete" multiple surfaces in one go?
View 2 Replies
View Related
Jul 12, 2012
Is it possible applying textures on solid surfaces in AutoCAD 2012?
If yes, how do I apply textures on them?
View 1 Replies
View Related
Jul 2, 2013
I've just started learning AutoCAD and came across my first obstacle I don't know how to work around. Here's what I'm trying to do.
I draw two lines and two circles and then trim the excessive parts as in the picture (in general it can be an area composed of various types of lines, straight lines, arc, and likely with rounded corners).
Then extrude to the height 2. This makes 4 surfaces (green). Now I build a solid 'around' the surfaces. In this example I draw a rectangle and extrude to the height 1 (red). And my question is: how do I remove the part of the solid that's enclosed within the green surfaces? Subtraction doesn't work as I don't subtract solid. Slicing doesn't work either as it's more than one surfaces. For the same reason I can't turn it into a solid.
acad02.jpg
View 2 Replies
View Related
Sep 16, 2013
How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
View 9 Replies
View Related
Nov 18, 2012
I am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
View 9 Replies
View Related
May 2, 2012
How do I add a single picture back into a collection? I have a collection of several pictures and accidently deleted one and I need to add it back to the collection.
View 3 Replies
View Related
Aug 12, 2013
I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
View 3 Replies
View Related
Nov 8, 2011
Is there a way in a dwg to only make a spicific part shaded and the rest in a 2D sketch,? i created a sketch and traced the part and filleted it but that took forever. im using IV 2011 RS
View 1 Replies
View Related
Aug 27, 2013
Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies
View Related
Dec 13, 2012
i am having a hatching issue, it seems no matter what hatch pattern i use and what hatch scale, alot of the hatch looks solid instead of the pattern i want, for example i am using currently ANSI37 @ Annotative with a scale of .20 and on the same paperspace page one plan with the hatch shows the cross hatching and the other one below looks solid (see attached) now i can go and say change the hatch scale and it reverts to the cross hatching, but then when i zoom out it goes back to "solid" is it a graphical issue?
View 7 Replies
View Related
Nov 23, 2011
I´m building a solid in inventor 2012 and I exported the model to ANSYS for Finite element analysis. The problem is that ANSYS
don´t recognize the solid as one part only and also can't assume connection between some lines and areas. I want to merge a part with inventor, so inventor can export the model as a solid 1 part. In solid works there is the option to merge a file when I save a file for exporting. How can I merge a single solid in inventor 2012?
View 4 Replies
View Related
Aug 14, 2013
Just discovered the IMPRINT command... noticing that it will only imprint a single object at once.
How to enable the command to IMPRINT multiple lines onto a single solid?
View 9 Replies
View Related
May 16, 2012
I would like explode a block which still maintain all sub blocks' XDatamyBlockRef.ExplodeToOwnerSpace() The above code does the job. However I can not get the exploded collection
Use the following code I can get object collection but there is no XData for each sub block.
Dim colAssemblyEnt As DBObjectCollection = New DBObjectCollection() myBlockRef.Explode(colAssemblyEnt)
My question is how can I get the sub block collection with each block's XData?
View 5 Replies
View Related
Nov 8, 2012
I trying to create an autocad obbject eg: line. after creating i need to add object data to the created object.
unfortunately i am not able to get the objectid of the created object.
code snippet on how to do this..
1. creating a object and add the created object to collect or selectionset
2. get the object id or refernece so i can attach object dat relavent to the objedt...
View 5 Replies
View Related
Feb 1, 2012
I have a part file that contain 7 separate solid. But in the drawing i want to show only 4 solids.
For this reason i put invisible command to other 3 solids in the part file . but in the drawing, i still see all the seven parts.
View 1 Replies
View Related
Feb 27, 2013
I want to make symmetric surface i.e. golf ball with dimples. I found that I can do them by using revolve cut but how can I set them symmetrically on whole spherical surface.
View 5 Replies
View Related
Jun 25, 2013
I'm trying to make a solid part from the attached file. I tried sculpting the part but only the sides of the bracket become solids.
View 3 Replies
View Related
