Is there a way in a dwg to only make a spicific part shaded and the rest in a 2D sketch,? i created a sketch and traced the part and filleted it but that took forever. im using IV 2011 RS
View 1 RepliesI'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
I´m building a solid in inventor 2012 and I exported the model to ANSYS for Finite element analysis. The problem is that ANSYS
don´t recognize the solid as one part only and also can't assume connection between some lines and areas. I want to merge a part with inventor, so inventor can export the model as a solid 1 part. In solid works there is the option to merge a file when I save a file for exporting. How can I merge a single solid in inventor 2012?
I have a part file that contain 7 separate solid. But in the drawing i want to show only 4 solids.
For this reason i put invisible command to other 3 solids in the part file . but in the drawing, i still see all the seven parts.
How can i convert some solid bodies to a single solid.
View 8 Replies View RelatedJust discovered the IMPRINT command... noticing that it will only imprint a single object at once.
How to enable the command to IMPRINT multiple lines onto a single solid?
I'm working on a project, and I need to make this collection of surfaces into a single solid object. I tried using sculpt, and after a few hours of trying to find the leak, I have failed. not watertight.
Also, I need to get this thing to a cnc mill, and they keep asking me for 2d drawings, dimensions, and tolerances. I assumed the 3d file would be good enough. How to make a file ready for a cnc, and how to make 2d drawings without putting 600 measurements all over the image? Every time I try to do a 2d object, the whole thing is a mess.
I am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
Here is what I want to do:
All black and white text, with a kind of 3D pop out and a shadow as well. Maybe there is an easy way or a guide.
How to convert the single line below containing 42" radius curves to a solid 4" diameter cylinder/pipe?
Capture.jpg
I'm using autodesk inventor 2010 and am having problems when inserting an image onto my model. Basically I select insert image then pick the bitmap picture but when I position it, it multiplies but stays in one grouping meaning I cant isolate one image.
View 8 Replies View RelatedI remember that you used to be able to specifically pick out individual cut edges to project to a 2D sketch. Maybe it was 2010? However, I come across this issue again and again since the new 2011 and now 2012 where I must project all cut edges. I can no longer figure out how to just project the ones I want. This can be every frustrating when dealing with complex shapes. Is this no longer possible?
IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
Can i flatten something like You can find on the pic. ( this one is from CATIA ) or something like this. Not everything, just surface by surface. When i draw similar thing, i had problem, because i dont know how to flattern single surface, All of them are curved.
View 4 Replies View RelatedI'm borrowing from the samples library in the Inventor:
Public Sub GetSingleSelection()
' Get a feature selection from the user
Dim oObject As Object
Set oObject = ThisApplication.CommandManager.Pick(kPartFeatureFilter, "Pick a feature")
MsgBox "Picked: " & oObject.Name
End Sub
Works fine, and is fairly simple, but the problem I'm having is if I press the escape key after starting the command, but before making my selection, I'm not able to start the command again.
I realize from my searching that using the Selection (Simple) sample allows for an interrupt, with some modification, was just wondering if there was something similar for this simpler selection option.
I design press tools. Is there any ways in inventor 2012, where I can have only one common sketch in zero height and extrude profiles in different heights. Like plate no 1 @100 to 120mm (in vertical axis. A 20mm thick plate placed at 100mm above zero plane.) and plate no 2 in 150 to 175mm height and so on.
View 6 Replies View RelatedI've just recieved a new pc with Win7 64bit (no admin access) and AIS 2008 SP3.
When I go to Projects>New, the only option is new Single user Project. How can I enable the other project types or what can cause them not to show up?
I am working using iparts on inventor 2013. How can i save/generate each part created on iparts as a single .ipt file?
View 4 Replies View RelatedI have an i Assembly, with a Sub-i Assembly and i Parts. Is it possible to "extract" a copy of one configuration as normal assembly? So that I have an assembly where I can modify parts without touching the iAssembly or iParts.
View 5 Replies View RelatedHow to use a single sketch for multiple extrusions, i would create all the holes and everything in one sketch and i could reuse that sketch again and again.i totally forgot how to do this.
View 2 Replies View RelatedI am working on a project where several holes in a sheet metal part will need to be cut as "knockouts". In previous years, either an engineer or the laser cutter programmer would set up the machine to partially cut a circle, but leave a gap to hold the knockout in place (basically a 340 degree arc).
Now that we are using Inventor, is there a way that we can create these features so that they show up in a dwg as a single line? It must be a single line; some of the holes are very small and if the laser makes more than one pass it could affect the integrity of the feature.
The closest I have gotten to accomplishing this is a surface extrusion on the folded part. When I send it to an .idw file, the line appears in the folded model, but I need it to appear in the flat pattern.
We have some weird printer issues here and i'm wondering if there is a config option within the print manager to set for simplex or duplex printing. I've looked in programming help and couldn't find anything as well as googling it. Looking for a oDrgPrintMgr.Duplexprinting=NO or something similar.
oDrgPrintMgr.ScaleMode=kPrintFullScale
oDrgPrintMgr.ColorMode=kPrintColorPalette
'oDrgPrintMgr.PaperSize = PaperSizeEnum.kPaperSizeDSheet
oDrgPrintMgr.PrintRange=PrintRangeEnum.kPrintAllSheets
'oDrgPrintMgr.Orientation = kLandscapeOrientation
oDrgPrintMgr.PaperHeight=ActiveSheet.Height
oDrgPrintMgr.PaperWidth=ActiveSheet.Width
A quick way to add a single column to multiple items in the Content Center? The column would be the same across the board, and I really don't want to edit several hundred family tables one at a time if I don't have to.
View 2 Replies View RelatedI was trying to add a new appearance to our libray this morning, got confused and started searching here and ran across an old thread of mine.
".... Note that you can have a single custom library that contains both physical materials as well as appearances, or keep them separate if you prefer...."
I had always thought that these were two seperate things. After I read this, I noticed in my .ipj that the Inventor Materials Library is listed under both Appearance and Materials.
I tried copying the "InventorMaterialLibrary.adsklib" but that did not work when I tried to add it under my materials library in the ipj.... It said "No Materials are available". HOW to go about creating a single library that contains both materials and appearances?
Windows 7 x64 -12 GB Ram
Intel i7-930 @ 2.80ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1 (before it was pulled)
Vault 2013
I have many old documents.Created with shared project. I want to migrate to Inventor 2012 vault or single project. But after the migration files are not available. I do not want to be associated with users.
View 6 Replies View RelatedWe have this need to have all of the solids in a drawing to be placed in the "solid" layer.
Sometimes folks are drafting lines to develop these solids, and keeping the lines on the "solid" layer, rather than moving them to another layer, or deleting them altogether.
I could get folks to run this command before leaving the drawing.
I'm thinking something along the lines of:
Select all entities that are on the solids layer that are not solids.
If nil, great, do nothing.
If entities are selected, let me do something with them.
I'm hoping the following can be modified ever so slightly.
(setq non_solid (ssget "X" (list (cons 0 "3DSOLID")(cons 8 "solid"))))
I have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
View 3 Replies View RelatedHow can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies View RelatedIs there away to trim the diagonal 3d solid to the top of the horizontal 3d solid in the picture.
View 4 Replies View RelatedI am drawing a column and I need to flatten out a section of it to get true size and shape to constructe a template.
View 9 Replies View Related