Can i flatten something like You can find on the pic. ( this one is from CATIA ) or something like this. Not everything, just surface by surface. When i draw similar thing, i had problem, because i dont know how to flattern single surface, All of them are curved.
View 4 Replies
I have a curved solid with a pattern subtracted from it in a model representing a sheet of mdf . is there a way to flatten the surface of the solid to get the geomerty of the cuts. I supose is same as matrial map.
View 1 Replies View RelatedI'm modeling a temperature gauge and would like to have glass over the gauge so the inside is visible. I can easily do this with an assembly, but I'm wanting to do this with a single part. I tried to derive a new part from the assembly, but the transparent part turns solid so nothing inside is visible. Is it possible to do this?
I've include pictures of what I want and what I end up with.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
Running a script to open up files and convert to another type. When it gets to a TIFF type file a dialog window titled 'TIFF Import Options' is opening. This windows has an Options column that contains two radio selections for 'Convert Layers to Objects' and 'Flatten Layers to a Single Image'. How would I open the file with the 'flatten layers to a single image' set?
View 1 Replies View Relatedi need to flatten the semi cylinder into planer surface...is there any modifier to do this...also i described exact need in the attached image..
View 8 Replies View RelatedIs there a way to surface this geometry with a single surface entity?
I had to use 2 lofts to "surface it" instead of region due to lines being non-coplanar with the arc (in other words top most corner is higher than the other adjacent 3 corners).
I have a series of Autocad Objects (3D faces). I need to turn the contiguous group of them into a SINGLE Autocad surface. I know next to nothing about vanilla autocad and 3D stuff. Seems there must be a way to make a surface out of objects. I would then use this resulting surface to carve a solid. DWG with 3D faces in it attached.
View 2 Replies View RelatedI have created a TIN (triangulated irregular network) of an existing survey in my terrain modelling software (12d Model). I am able to export (save-as) the TIN as 3D Face Triangles for opening in AutoCAD (2012) or similar.
My ultimate goal is to create a solid surface in Inventor. The surface has to be seemless (stitched) in order for me to create a new sketch and extrude to this surface. Finally giving me a part in Inventor that represents my ground. I would then want to use the same process to bring into Inventor all other Civil Design works created in 12d Model such as roads, earthworks platforms (including dams) etc.
I've tried stitching (Inventor and Microstation) without success. Inventor keeps crashing and Microstation looses data. AutoCAD (2012) won't let me create a polyface mesh from 3D Faces. I tried doing a mesh, surface union without success. Programs either crash or data is lost.
Is it possible to merge two or more adjascent / overlapping surfaces into a single surface?Is it possible to "Delete" multiple surfaces in one go?
View 2 Replies View RelatedI'm trying to flatten a section of sheet metal so i can get a cut lenth for my fab shop. Please see attached drawing. I want to use these dimensions, and then flatten the part so my fab shop can trace it and cut the sections, bend them and weld together, but when i use the flatten command, nothing happens..
View 7 Replies View RelatedIf there`s anyway to flatten any of these pieces on inventor? I`ve already flatten some simple ones.
View 1 Replies View RelatedWe need to fabricate a curved component but in order to do so we must first flatten it. Usually when I come across something like this I just do the math and draw it out by hand but I really need to learn how to have autodesk do it.
View 5 Replies View RelatedI have a bent glass file that i am trying to flatten in Inventor Pro 2014. It is not allowing me to flatten it. How to flatten this file or if it is even possible with Inventor?
View 3 Replies View RelatedSuppose we have a plastic part modeled as bent around a cylinder with an x-axis. Because the material is plastic and the manufacturing method is injection molding, part stretch is not a concern.
Suppose further that the part is a solid part that will be converted to a straight spring. The part needs to be flattened to obtain the correct spring dimensions--the part may have variable width in the x direction.
What is the best way to flatten this part?
Its been a long while since I have run into something that I have drawn which I cannot get to flatten. I am using Inventor 2011. If you can get it to work in 2012 or later, then I guess it is just time I upgrade.
View 6 Replies View Relatedhow I can add more volume to curved object surface? Say for example I have a plastic cup.You can think of this as cylinder object ,which was the shelled out using the shell tool and then had its base sealed.
Now at certain parts, I would like to increase the thickness and then blend it the rest of the surface(may be chamfer its edges) .
At certain parts on curved surface I would like to add an extra mm, I think if the surface was flat I would just sketch the shape, then extrude it by few mm and smooth the edges by doing a chamfer
But how can this be done on surface that is curved? Or multi curved for edges?
I'm designing a press for a skateboard similar to: Rib Press
I have the board modeled: (see attached)
Now what i want to do is generate those ribs as seen in the picture.
I tried creating a block that intersected with the board and tried to split the rib at the surface, but to no avail. I think the issue has something to do with the curve of the board in two directions, but i can't seem to get it right.
if you are having trouble visualizing what i'm asking about, look at this. I want to be able to figure out the exact shape of those center ribs to print and eventually cut out of wood.
It is not possible forme to add the fil because it is to large 1.8MB how can I poste then I like to know if it is possible to extend the button flat surface diameter ø12.5 up to the shaped surface. The result should be a total solid block whit a surface shaped hole.
File last up-date with Autodesk Inventor Professional 2013
I am a beginner when a extrude a feature and select a part surface for new sketch now i want is to offset that surface but i can,t there is + sign with mouse icon and something like fully constrained is written in down the window.
View 9 Replies View RelatedI am trying to merge the gaps left from extruding a flat surface off a circular surface, delete face and heal does not appear to work.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I have an elbow with a slit on the other side and would like to use Flatten feature in sheet metal. How do I do it? I tried but an error pops-up, what does it mean.
I have attach the file.
why this spiral will not flatten properly.
View 2 Replies View RelatedWe received a surface model from a vendor that I have patched up as best I can, it still has one hole that I can find that I haven't been able to fill. Ideally we would like to have a solid model, but I'm running out of time to get this done and the surface model we have would be good enough for our purposes IF I can get the yellow surface tangent lines to turn off or change their color to black.
I've attached a jpg of the surface model with the yellow lines and uploaded the model here: [URL].....
The part i make is from solid model>The part needs to be in sheet metal.What steps do i use to make as sheet metal part and have option to flatten part.
View 1 Replies View RelatedI am learning about CS2 now.
Is it best to flatten my images once I get them completed or is it better to keep them in psd format with the layers intact. What are the pros and cons (other than file size of course).
do you flatten your layers when finished? PSD files are huge and flattening seems to compress the size.
Also, if you do flatten, can you open them up again to make further adjustments?
Is there a way in a dwg to only make a spicific part shaded and the rest in a 2D sketch,? i created a sketch and traced the part and filleted it but that took forever. im using IV 2011 RS
View 1 Replies View RelatedI'm using autodesk inventor 2010 and am having problems when inserting an image onto my model. Basically I select insert image then pick the bitmap picture but when I position it, it multiplies but stays in one grouping meaning I cant isolate one image.
View 8 Replies View RelatedI remember that you used to be able to specifically pick out individual cut edges to project to a 2D sketch. Maybe it was 2010? However, I come across this issue again and again since the new 2011 and now 2012 where I must project all cut edges. I can no longer figure out how to just project the ones I want. This can be every frustrating when dealing with complex shapes. Is this no longer possible?
IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
I´m building a solid in inventor 2012 and I exported the model to ANSYS for Finite element analysis. The problem is that ANSYS
don´t recognize the solid as one part only and also can't assume connection between some lines and areas. I want to merge a part with inventor, so inventor can export the model as a solid 1 part. In solid works there is the option to merge a file when I save a file for exporting. How can I merge a single solid in inventor 2012?
I'm borrowing from the samples library in the Inventor:
Public Sub GetSingleSelection()
' Get a feature selection from the user
Dim oObject As Object
Set oObject = ThisApplication.CommandManager.Pick(kPartFeatureFilter, "Pick a feature")
MsgBox "Picked: " & oObject.Name
End Sub
Works fine, and is fairly simple, but the problem I'm having is if I press the escape key after starting the command, but before making my selection, I'm not able to start the command again.
I realize from my searching that using the Selection (Simple) sample allows for an interrupt, with some modification, was just wondering if there was something similar for this simpler selection option.
