AutoCad 3D :: Converting Faces To Single Surface (or Polyface Mesh)
Aug 2, 2012
I have created a TIN (triangulated irregular network) of an existing survey in my terrain modelling software (12d Model). I am able to export (save-as) the TIN as 3D Face Triangles for opening in AutoCAD (2012) or similar.
My ultimate goal is to create a solid surface in Inventor. The surface has to be seemless (stitched) in order for me to create a new sketch and extrude to this surface. Finally giving me a part in Inventor that represents my ground. I would then want to use the same process to bring into Inventor all other Civil Design works created in 12d Model such as roads, earthworks platforms (including dams) etc.
I've tried stitching (Inventor and Microstation) without success. Inventor keeps crashing and Microstation looses data. AutoCAD (2012) won't let me create a polyface mesh from 3D Faces. I tried doing a mesh, surface union without success. Programs either crash or data is lost.
View 3 Replies
ADVERTISEMENT
Dec 5, 2012
I have a dwg file of a section of a tunnel that has been exported from Microstation as a polyface mesh surface. What I am trying to achieve is cutting a hole into the surface. I am assuming that I cannot cut a surface directly, but need to convert it to a solid first.
I've searched this site and I have tried everything I can think of to no avail. Inventor does not seem to be able to convert the surface to a solid. Also, when I import the surface to Inventor, some of the triangular meshes are not there, and there are too many "holes" to patch them manually. I've also tried using lisps in AutoCAD, but on the surface and 3D faces after exploding it, but for example m2s.lsp or f2s.lsp do not seem to work.
I have also had the same file exported from Microstation as ACIS .sat, but version 18.0 is not readable by Inventor. Is there a way to convert the ASCII file to an older version?
I am using Inventor 2013, and I also have AutoCAD 2013 available.
View 4 Replies
View Related
Mar 13, 2013
I have some topography I've converted from SketchUp to .Dwg and I was curious if AutoCad (or any of it's versions) had the capabilities of turning this series of meshes into a run-of-the-mill topographic map. For instance, a standard plan view showing elevation lines at say 2' intervals.
If any of the versions are capable I can definitely get the 30 Day trial and give it a go.
View 1 Replies
View Related
Jul 3, 2012
I created a 3D math surface using 3DPLOT. However my outcome is a polyface mesh and I need to convert it to a solid. I have already tried the "Convert to Solid" & "Convert to Surface" options in the Mesh tab but I get "Mesh not converted because it is not closed or it self-intersects." I also tried the f2s.lsp but I am unsure on how to select my object.
Here is my object: [URL]
It is basically a 3D plot of cos(x) + cos(y).
View 9 Replies
View Related
Jul 5, 2012
I created a 3D math surface using 3DPLOT. However my outcome is a polyface mesh and I need to convert it to a solid. I have already tried the "Convert to Solid" & "Convert to Surface" options in the Mesh tab but I get "Mesh not converted because it is not closed or it self-intersects." I also tried the f2s.lsp but I am unsure on how to select my object.
Here is my drawing.
It is basically a 3D plot of cos(x) + cos(y).
View 6 Replies
View Related
Oct 26, 2011
I have a series of Polyface meshes imported from a Revit project.
(If this is doable straight from Revit that'd be good too, but I haven't had any success with that)
If I right click on one and select properties, I can clearly see where each vertex has an X, Y, and Z coordinate. For the purposes of a research project, I'd like to be able to automatically export all these coordinates to any ascii format for input into an algorithm. The dataextraction command does not seem to be capable of this and only exports the number of faces and vertices of each mesh.
View 0 Replies
View Related
Jun 8, 2011
Here's the file:
[URL].......
I'm trying to figure out if there's a way to separate a Polyface Mesh at a particular point. I would like to use the SLICE command but it's not working. I tried SUBTRACT on the solid but no can do either. Is there a way to do this?
I have a huge structural floorplan, and I want to divide it up into sections so when XREF'ed in my drawing I can load it in piece by piece, saving a huge performance hit.
View 6 Replies
View Related
Jan 21, 2012
I have a 3d model of a building and all of the faces of the building are of the type polyface mesh. If I use explode, each polyface mesh gets split into individual 3d faces. But, I'd simply like to replace each polyface mesh with a 3d face (not multiple 3d faces). Is there anyway to do this?
The reason I'm doing this is because I'm importing the building model into ray tracing software, but the software doesn't like the building when the faces are of the type polyface mesh.
View 3 Replies
View Related
Oct 6, 2008
I'm trying to figure out a way to convert a 'Polyface Mesh' into a mass element or some other solid. The Polyface Mesh was created by importing a .3ds model using the '3dsin' command. The .3ds file was created from exporting the model out of Max.
View 5 Replies
View Related
Sep 17, 2013
My problem is I have an object polyface mesh and any point, determine which points in the mesh object polyface not?
View 5 Replies
View Related
Aug 7, 2012
Import Polyface Mesh to the AIP2012
View 3 Replies
View Related
Jun 11, 2013
How to add additional openings in the polyface mesh model.
3D model as attached.
View 1 Replies
View Related
Nov 23, 2011
I have received a drawing drawn in a polyface mesh and I'm trying to convert it into a 3D shape in order to determine the volume and surface area of the shapes.
View 9 Replies
View Related
Aug 30, 2013
I have a 3D model of a steel construction with the assignment to create special views of it and 2D projections for manufacturing of each beam individually. I tried many commands like Flatshot ( which don't work cause its a complex polyface mesh, and smooth mesh only makes a additionally mess), Flatten with hidden lines ( lines are mixed and changed), the LISP command SUPFLAT, but the hidden lines appear in the projection. SOLVIEW and SOLDRAW create views in the paperspace, which when export as a layout, become a mess too. The Lisp command M2S also does not work.
View 9 Replies
View Related
Jul 7, 2012
I created something in Rhino and imported it in Autocad as .3ds file but the geometry is not a solid one but a polyface mesh and I cannot edit it with boolean commands, thus I cannot continue editing it...I found out that there is this plugin Mesh 2 Solid but it is not free and I cannot find a proper crack anywhere..I cannot find any other way to make mesh solid...
View 8 Replies
View Related
Oct 17, 2013
I have a complicated 3d mesh and i want to use some edges in another software. The software accepts lines and i want to convert mesh to simple lines. I can make 3d polyline from the mesh but i can't convert it to line.
How we can convert mesh to line or 3d face to line or 3d polyline to line?
View 9 Replies
View Related
Jul 18, 2011
I am looking for a method to convert 3d surfaces or regions into 3d faces so that they can be imported in RISA. I currently have a model with 3d faces (see attached), but do not know a method for adding the openings shown in red.
View 9 Replies
View Related
Mar 3, 2011
I am using maya 2011. I have a simple roof, which i extracted faces from the small house (see pic1). However, when i smooth the roof, all the extracted faces went smooth individually (see pic2). How can i combine all those individual faces i extruded, to make into a single mesh or polygon, so that when i press 3, it will smooth like as in pic3 rather than individually.
View 3 Replies
View Related
Apr 2, 2013
Any program or routine in lisp or net that can select a group of 3d polylines in the form of a tin and convert them all to 3d faces?
I know that I can take the 3d polylines and explode them to 3d lines. Then I can use map clean to delete the duplicate lines. Then I can create a C3D surface using the 3d lines. Then I can extract 3d faces from the surface.
View 9 Replies
View Related
Apr 7, 2011
i'm trying to use the wire tool deformer to sculpt some mouth shapes on my character but when i turn the wire tool on the faces of my mesh around the mouth area dissapear,I can still see the wireframe but the faces dissapear, I tried to turn down the dropoff distance attribute but to no avail.
View 6 Replies
View Related
Sep 17, 2013
I have a model of a boat from some database. It's build from 3D faces but I would like to make it a 3D solid with a thickness of 3mm.
I can convert the faces into a surface, but i can't seem to get any of the two models into a 3D solid. I have tried thicken, convtosolid and a lot of other options without luck.
I was wondering if I could make two surfaces, one smaller than the other, place them ontop of eachother and create solid between them?
View 6 Replies
View Related
Nov 19, 2013
I have some DWG files which contain walls of old castle some of the vertex are missing so I have to join them manually or found software to generate them automatically Does solid works have this functionality ?
After joining vertex how can I convert walls to meshes?
View 1 Replies
View Related
Dec 27, 2013
I've currently written an application for SolidWorks that reads file that geometry in the form of faces (ie. 3 or 4 double values that represent triangular and quadirilateral faces). I am trying to create the same application to work for Autodesk Inventor, but I am having some issues.
First, I am basing my code off from the examples given in the help files. There's a lot of pointers to objects being to get to the Face creation portion, this seems to be slowing my appliation down considerable compared to the SolidWorks counterpart. SolidWorks API has a modelling method called CreatePlanarSurfaceDLL that allows me to provide an array of doubles representing the vertex points in order (x, y, Z) for each point, so the array looks like this for a triangle (P1.X, P1.Y, P1.Z, P2.X, P2.Y, P2.Z, P3.X, P3.Y, P3.Z). Is there anything similar in the Inventor API to simply the process?
Secondly, when using the example, they all have a known "shape" and therefor there are a definied number of vertices, edges, faces, etc. And when adding the faces, the known points / vertices are used. In my case, each face contains information for it's 3 or 4 vertices. I created these using the prescribed methods, but when the final surface body feature is created, and a repair is performed on it, it shows a lot of duplicate edges and vertices. Do I need to take the time and filter out all of the duplicate vertices, and point to a single vertex that may represent a vertext used by up to 3 or 4 faces?
View 1 Replies
View Related
Dec 26, 2012
I have a family picture where two of my family members got too much light. I downloaded the sahdow / highlight plugin but I just can't get it to work as I want to. changing the highlight and shadow of only certain faces in a single picture?
View 1 Replies
View Related
Oct 16, 2012
I've got a fairly complicated polygon mesh that I turned into a mesh. No problem. Then I try to convert to a surface and while the geometry is accurate the isolines change dramatically. I'm trying to bring the item into Inventor so that I can have a clean surface to work from. Unfortunately I get what you see in the picture. The top left is before converting to a surface. Bottom right is after.
View 1 Replies
View Related
Apr 14, 2013
How to convert a 3'-6" radius 4" OD single line 90 deg turn int a solid cylinder (90 deg elbow pipe fitting).
View 2 Replies
View Related
Feb 7, 2014
I am attempting to apply multiple textures to a garage (both inside and outside). I have been able to create two separate uvw templates for the inside and outside using an editable mesh but the textured templates are not being applied to the model correctly. how can I detach the editable mesh to form separate objects?
View 4 Replies
View Related
Oct 8, 2013
How to drape OS Mastermap/DWG over Profile DTM Surface Mesh? I've been trying for hours and can't get it to work. I've looked at articles online and they are hardly any use as they show you how to do it properly.
View 1 Replies
View Related
Jun 25, 2011
I'd like to be able to create a surface or mesh from contour lines to give a better 3D representation of terrain than just contour lines. "Drape" seems to be the tool ACA, but I'm wondering if AutoCAD can do something similar. LOFT sorta works, but even then, I have to do it in sections, and I'm not really looking for a solid.
View 7 Replies
View Related
Sep 17, 2013
I need merge many objects in one for export to fbx. If I delete any of polySurface objects, mesh lowpolyHouse crushes. If I stay it, than it all export to fbx file, problem is that I need mesh object only.
View 1 Replies
View Related
Apr 29, 2013
Ok received parts from a customer. It was ALL mesh features.I converted some of them(the mesh features) to Solids. Some would not convert to solids (converted to surfaces).
I need to have the COG show up correctly. Yes, I have a physical COG. I know where it is supposed to be.
I am trying to use this and several other parts (with mixed, Solids, Surfaces, Mesh features), in an assembly AND balance it all thru a common lift point.
How can I correct the COG of the individual parts, so that the assembly is correct.
I have work planes for the corrected COGs, but I am afraid that I will need to calculate the new COG for the assebmly.
View 7 Replies
View Related
