AutoCAD Inventor :: How To Merge A Single Solid
Nov 23, 2011
I´m building a solid in inventor 2012 and I exported the model to ANSYS for Finite element analysis. The problem is that ANSYS
don´t recognize the solid as one part only and also can't assume connection between some lines and areas. I want to merge a part with inventor, so inventor can export the model as a solid 1 part. In solid works there is the option to merge a file when I save a file for exporting. How can I merge a single solid in inventor 2012?
View 4 Replies
ADVERTISEMENT
Sep 19, 2012
I'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
View 4 Replies
View Related
Nov 8, 2011
Is there a way in a dwg to only make a spicific part shaded and the rest in a 2D sketch,? i created a sketch and traced the part and filleted it but that took forever. im using IV 2011 RS
View 1 Replies
View Related
Feb 1, 2012
I have a part file that contain 7 separate solid. But in the drawing i want to show only 4 solids.
For this reason i put invisible command to other 3 solids in the part file . but in the drawing, i still see all the seven parts.
View 1 Replies
View Related
Dec 1, 2006
How can i convert some solid bodies to a single solid.
View 8 Replies
View Related
Apr 9, 2013
I'm trying to work with some geometry imported from another software. Somewhere there's a problem with drawing precision and imported geometry gets slightly warped. For example in the attached file four points of bottom face should be in the same plane, but they're out by 0.0006mm (in this case). Similar imprecision is evident on all sides (this should be a kind of a flat panel-type object with grooves cut on sides). Is there a way to get autocad to merge faces on a solid or somehow clean it up?
View 8 Replies
View Related
Jun 5, 2012
Is it possible to merge two or more adjascent / overlapping surfaces into a single surface?Is it possible to "Delete" multiple surfaces in one go?
View 2 Replies
View Related
Aug 14, 2013
Just discovered the IMPRINT command... noticing that it will only imprint a single object at once.
How to enable the command to IMPRINT multiple lines onto a single solid?
View 9 Replies
View Related
Nov 4, 2013
How can i merge this picture below
with this picture here
i will like to crop this picture and add it to the top one as the background and then merge/flatten it as a single file. How do i go about it as i am new to coreldraw.
View 1 Replies
View Related
Mar 22, 2013
I'm new to PS 11. In error, I created a catalogue with several files. I then created a second catalogue with several files. I now find that I was wrong, and I now would like to merge these two different catalogues into a single catalogue without loosing my previous work.
View 6 Replies
View Related
May 5, 2013
I'm working on a project, and I need to make this collection of surfaces into a single solid object. I tried using sculpt, and after a few hours of trying to find the leak, I have failed. not watertight.
Also, I need to get this thing to a cnc mill, and they keep asking me for 2d drawings, dimensions, and tolerances. I assumed the 3d file would be good enough. How to make a file ready for a cnc, and how to make 2d drawings without putting 600 measurements all over the image? Every time I try to do a 2d object, the whole thing is a mess.
View 5 Replies
View Related
Jan 3, 2012
__Is there a way to 'merge' multiple curves into a single curve?
By this I mean I have file with 2-12 curve layers - I wanted to 'merge' the curves so that I can end up with a single curve with the attributes of many. Maybe is there a script that would do this?
View 8 Replies
View Related
Jun 4, 2012
I'm trying to make this street a solid so that I can break it up. I've tried numerous ways but couldn't find a way to do it.
[URL] is what i have, I want to somewhat combine those both to create a solid.
View 1 Replies
View Related
Oct 22, 2011
I am creating an object that has four text boxes in an object that is about 2" x 4". When I do the merge, I end up with multiple pages, all 2" x 4". How can I now move those pages spaced about a larger page, say 11" x 17" so I can have positioned and print multiple 2" x 4" objects on the larger sheet?
View 2 Replies
View Related
Nov 18, 2012
I am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
View 9 Replies
View Related
Feb 15, 2014
Here is what I want to do:
All black and white text, with a kind of 3D pop out and a shadow as well. Maybe there is an easy way or a guide.
View 1 Replies
View Related
Sep 15, 2011
I have traced out this piece of geometry using CV curve and then used loft to convert the Curves into actual geometry. I need to have one solid piece of geometry to project an image onto, how can I convert this to one solid piece? I have attached my .mb file.horro_chair.mb.zip
View 3 Replies
View Related
Apr 14, 2013
How to convert the single line below containing 42" radius curves to a solid 4" diameter cylinder/pipe?
Capture.jpg
View 2 Replies
View Related
Aug 28, 2013
I have an external ilogic rule that creates a set of DWF drawings for all parts and subassemblies (as long as the idw files exist) within and including a main assembly.
I would like to merge all the DWF drawings of the sub assemblies and component parts into the DWF of the main assembly. Is there a method within DWFAddIn that will allow me to merge the files? Is there another way that I can merge the DWF files using the same ilogic rule (one rule to create and merge all DWF's together?)
View 3 Replies
View Related
Mar 20, 2013
I have 2 different parts that I created as separate ipt files. I then bring them into an assembly and place them how I want, but they have overlapping material. Is it possible to turn these 2 parts into one part? If yes, how?
View 4 Replies
View Related
Oct 3, 2013
I'm having difficulty with the BOM. I have a number of identical parts with different file names from the frame generator and other tools such as mirror. They all show up as individual parts in the BOM.
I have "Enable Row Merge on Part Number Match" cheched and even though their part numbers do match, the rows are not merged.
On on 2011. New Inventor User, recently moved from 2011 to 2014 - Win. 7.
View 4 Replies
View Related
Oct 5, 2012
I have 2 piping runs, each one containing several routes. I need to merge them, to obtain a unique run containing all the routes.
View 2 Replies
View Related
Jul 6, 2012
I am using inventor 2012 but i am not using Vault, I try to understand how to combine or merge many projects together. I got a retraction system that is one project with his own content center, then i got a hood that is another project with his own content center.
Since im going to create many different retraction system and many different hood in the future, to be used in many different combinations. I want to be able to create a master project that includes smaller projects so i can still work all the projects independently.
View 3 Replies
View Related
Jun 21, 2013
Is there any way to get the BOM to merge using something other than the Part Number. It seems as though it is the only option for merging the rows. I would like to use the stock number as the key.
View 6 Replies
View Related
Jun 11, 2013
I created a bom export rutine but when a virtual component is the same as a inserted standard part the rowmerge does not work.
See example picture in attachment.
View 2 Replies
View Related
Aug 6, 2013
I've created a frame out of tubular steel using frame generator. When specifying sketch lines for the members, i indadvertently selected two adjacent, co linear members, instead of going from point to point.
i.e. frame members are A to B and B to C - what I am after is a frame member from A to C.
I want to merge the two, to have a continuous piece of steel, however i'm afraid that deleting them both and replacing will delete mates which i have in place to each of their faces.
View 1 Replies
View Related
Nov 8, 2012
I created hole table but i unable to merge the cells. but i need my output will be as per the input. How to make sure it is possible to give inventor 2011 & 2012.
View 6 Replies
View Related
May 15, 2012
I create a new assembly and place a component multiple times. When i open the Bill of Material i see one line with a QTY of 6 (the number of times the component was placed)
Now if i uncheck the "Enable Row Merge on Part Number Match" The BOM should show 6 lines with the same component and a QTY of 1 ....................correct?????? But it does not...........
View 9 Replies
View Related
Nov 18, 2011
I'm using autodesk inventor 2010 and am having problems when inserting an image onto my model. Basically I select insert image then pick the bitmap picture but when I position it, it multiplies but stays in one grouping meaning I cant isolate one image.
View 8 Replies
View Related
Aug 1, 2012
I remember that you used to be able to specifically pick out individual cut edges to project to a 2D sketch. Maybe it was 2010? However, I come across this issue again and again since the new 2011 and now 2012 where I must project all cut edges. I can no longer figure out how to just project the ones I want. This can be every frustrating when dealing with complex shapes. Is this no longer possible?
IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
View 4 Replies
View Related
Jan 3, 2013
Can i flatten something like You can find on the pic. ( this one is from CATIA ) or something like this. Not everything, just surface by surface. When i draw similar thing, i had problem, because i dont know how to flattern single surface, All of them are curved.
View 4 Replies
View Related
