AutoCAD Inventor :: How To Merge 2 Piping Runs
Oct 5, 2012I have 2 piping runs, each one containing several routes. I need to merge them, to obtain a unique run containing all the routes.
View 2 Replies
ADVERTISEMENT
AutoCAD Inventor :: Make Drawing Of Piping With BOM
Oct 4, 2012I was giving an assembly with a lot of piping in it, but the piping wasn't done using the Tube & Pipe. I need to make a drawing of the piping with a BOM. I made an ISO view and turn off the visibility of the parts I didn't need.
My question is if there is way for the BOM to only show the visible parts in my drawings. I know in iAssemblies I can exclude the parts I don't need, but that would take awhile considering there are over a hundred parts in my assembly. I really don't want to redo the piping mainly because of my inexperience with Tube & Pipe.
AutoCAD Inventor :: Isometric View From Piping Model?
Apr 1, 2010Is it possible to creat Single Line Isometric from the Piping Model?
View 4 Replies View RelatedAutoCAD Inventor :: Piping - Isometric Dimensions To Elbows
Sep 7, 2013I need a way to add isometric dimensions from the elbow below?
This is how standard piping isometric drawings are done, no need for a front view, top view, etc.
Just all dimensions on one isometric view.
I am creating piping drawings for a Power Station and want to dimension from the intersection of the centrelines of all the elbows on the pipe run (just like dimension 300 and 1282 in the picture below).
I've been able to add dim 300 & 1282 by using "Include Route Centerlines" BUT if there's piping created without a piping route this cannot be done.
I don't understand why I cannot get dimension A & B from the standard work features displayed on the elbow or dimension between two elbows just using these work features?
AutoCAD Inventor :: Publish DWF Of Assembly With Pipe Runs?
Jun 27, 2012I've been working on putting all Pneumatic/Hydraulic/Electrical runs into our models lately, and while the modelling portion of it (actually making the runs) is fairly straight forward, it seems that documenting it in a way that the shop can easily work with it is another story.
Due to the large size of the assembly and amount of runs we have, it is difficult to capture in 2D printed drawings.
We do use Vault, so I think our solution is going to be to have our visualization files (dwf) automatically sent to a network location that can be accessed by the shop.
Now i am having issues with actually naming each run, so that instead of it saying Route 10/Flexible Hose 6 that it says something actually useful such as "Supply Gladhand to Filter". I am unable to rename any of the routes (I can rename the Runs though), so I figured I would put a description into the iProperties of the Flexible Hose portion of each route, and export the object properties when making the dwf.
Now, when I select a solid part that I made in Inventor, I can see its description in the Object Properties of design review no problem, but if I select a hose in design review, the only Object Properties i see are its Center of Gravity.
Is there any way to get a semi-useful description into a dwf for a tube/pipe run, or am I out of luck?
AutoCAD Inventor :: Error With Tube And Pipe Runs?
Nov 19, 2013I noticed in the tree of my tube and pipe runs, two of the run names are red. All others are black. Is this indicating an error in these runs? I'm not getting any error messages and everything seems to run fine. I'm just curious I guess. I've attached a picture of the tree.
HP Z400 Workstation
Intel Xeon @ 3.33GHz
12.0 GB RAM
Windows 7 64-bit
Inventor Pro 2014
AutoCAD Inventor :: How To Make Pipe Branch Off In Piping Run Without Tee Fitting
Feb 28, 2013I'm trying to make a piping run that at one point branches off in another direction. Basically I want to have one straight pipe, a main line, where another pipe branches off and sticks out vertically from it and goes its own way. However, I want this branching pipe to be welded to the main line, not connected with a tee fitting. Inventor won't let me create branches from within a route, and it doesn't seem to want to let me snap to the existing main line run if I create a new run for the branching pipe.
View 5 Replies View RelatedAutoCAD Inventor :: Piping Route Will Not Update When Change Dimension
Apr 12, 2013My piping route will not update when I change a dimension when editing the route itself. See below. I can change a dimension, the 3D sketch of the route will update, but the pipe will not move into the correct position. Doing multiple rebuilds and updates does not update the piping.
IV 2010 Tube & Pipe SP4; ACAD Mechanical 2010;
2.5 ghz Xeon Processor
8 gb RAM
Windows 7 Professional x64
EVGA GTX 560 2gb DDR5
AutoCAD Inventor :: Piping And Routed Systems-Style Library Missing?
Sep 9, 2011I'm trying to utilize the piping and routed systems tool to run some pipe, but when I setup my pipe styles, it cannot find the xml files for the pipe, fittings, etc. I know I am connected to my content server as I can insert individual fittings and manually place pipe lengths. I am running Inventor Professional 2009
View 6 Replies View RelatedAutoCAD Inventor :: How To Stop Dragging Of Tube / Pipe Runs / Routes
Oct 21, 2011We've been using Tube and pipe for a few months now, and still working through the quirks and tricks for producing a stable route. One problem however as more users are starting to use T&P is when in the top level T&P assembly they are dragging on a route and not always aware they have done so - this can result in the route being rotated fractions of a degree or moved fraction of mm and causing no end of confusion and frustration later on trying to diagnose and fix. Is there a way to 'lock' a route in place so it cannot be dragged in the top level?
Have tried switching off adaptivity in the i Properties of 'Tube & Pipe Runs' assembly, but this usually switches back on automatically. One user had a problem where the included geometry (taken from the x,y,z axes) had also moved and had to be deleted and redone - Wouldn't have thought anything based on the x,y,z axes should move?
AutoCAD Inventor :: Minimum Segment Length Violation In Tube & Pipe Runs?
Jan 2, 2014I keep getting this minimum segment length message after running tubing routes. I've already configured the tube style and entered the minimum length I want. I place tube fittings before I run tubing, so I don't include fittings/couplings in my tube style. The lengths of the segments are equal to or longer than the segment rule I entered, so I'm not sure why I'm getting this error message. I also get a message saying that a segment will violate the rule once fittings are placed, even though I've opted out of using fittings in the style. To get around this error I've been having to go into each route and edit the sketch to make the problem segments longer.
HP Z400 Workstation
Intel Xeon @ 3.33GHz
12.0 GB RAM
Windows 7 64-bit
Inventor Pro 2014
AutoCAD Inventor :: Display Leather Cover On Cushions With Pull Lines For Piping Detail
Feb 8, 2013I design cushions for airplane seats and am trying to display a leather cover on the cushions with pull lines for piping detailing. etc. I am also wondering if a leather material style is availble for DL online.
View 3 Replies View RelatedAutoCAD Inventor :: Open A Assembly File / User Selects A Part / Plugin Automatically Runs
Feb 27, 2013is it possible to write a plug in that runs when a user does something.example. you start inventor and open a assembly file the user selects a part and the plugin automatically runs.no pussing buttons, no quick key, it just runs.
View 2 Replies View RelatedAutoCAD Inventor :: Calculating Tube Length (not Tube And Piping)?
Mar 16, 2013I have a question about calculating the maximum tube length. Why do i ask this, because you can just measure it on drawing?
I'm building a parametric model for building simple storage tanks, and the goal is to get a complete BOM out of the model without any difficulties.
I have 4 possibilities of tube positioning on the tank. (see image)
1. A tube that stands in the center of the axis of the main tank.
2. A tube that stands in the center of the axis of the main tank, but under an angle
3. A tube that doesn't stand in the center of the axis of the main tank.
4. A tube that doesn't stand in the center of the axis of the main tank, but under an angle
These 4 possibilities can be flush with the inside of the tank or not.
Is there a easy way to determinate the longest point from the front of the tube? This longest measurement will be the length i need to get into my description for the BOM.
AutoCAD 2013 :: Add On Piping Programs
Jun 7, 2012Any good add on PIPING program for AutCad. We've been using CADPIPE, but every time that they do an update, their program changes default settings. It's getting to the point that it's time to look for a program that will work with autocad and not make me have to reset all of my settings every time I start Cadpipe.
View 1 Replies View RelatedAutoCAD Civil 3D :: Views Of Piping
Jan 8, 2014I want to be able to orbit and pan beneath a surface to see the relationship of pipes and structures to the surface. Its as though you were looking up at the ceiling in a room. Using orbit is limited because it flips the surface over (upside down), when trying to view the underside of a surface.
View 3 Replies View RelatedAutoCad :: 3D Piping In Plan View
Feb 15, 2013Having issues plotting. I have a sheet with 3d piping in plan view, viewport is set to Legacy Hidden as always. I have a 3DCLIP plane set to only see pipe at a certain elevation. When plotted, some of the pipe lines are missing. If I change the viewport display view, then the piping is fine but random objects show up that shouldn't b/c of my 3DCLIP plane.
View 0 Replies View RelatedAutoCad :: Isometric Piping Drawings
May 14, 2013When I start an Iso drawing should I use the 3D Views under the View tab and set it to SW Isometric or should I use the Snap/Style/Isometric way? I like using the 3D views, but it doesnt set the drawing up the same. What is the accepted procedure.
View 7 Replies View RelatedAutoCad :: How To Draw Piping Isometrics
Aug 10, 2011Drawing Piping Isometrics in Autocad?? I dont have any experience in Isometric Drawings in autocad......
View 6 Replies View RelatedAutoCAD Civil 3D :: Export Piping To Cadworx?
Oct 25, 2013The title says it all. I need to get my pipe network into Cadworx in all its 3d glory. What types of formats they accept for importing? (Civil 3D 2013)
View 1 Replies View RelatedAutoCad 3D :: Adding 1 / 8" Gaskets To Piping
Oct 21, 2011I need to add 1/8" gaskets to flanged piping. My primary reason for doing this is so I can get the correct length for the pipe. I was planning on simply pulling the flanges back and 1/8" but when I do that it stretches the pipe. Is there a way to detach pipe from fitting or fittings from fittings so I can move them independently.
Or could I just add 1/8" gaskets in there somehow. I'm of course working in 3d. autocad 2007. I can always create fab-drawings by just doing the math with the current drawings but I want to try to get it in the model, just in case.
AutoCad :: Piping Material Library Including All Dimensions?
Dec 11, 2013i need complete piping material library for Auto CAD which included all dimensions.
View 9 Replies View RelatedAutoCad 2D :: Produce Pump Symbol For Piping Diagram?
Mar 17, 2009i am trying to produce a pump symbol for a piping diagram. 2 polyline arc and a base in 2D. i have added a linear parameter and a scale action however when i scale my block the polyline width changes can i stop this happening ?
View 9 Replies View RelatedAutoCad 3D :: Create Solid Model Of Structures And Piping?
Mar 16, 2012Any program that can accept point clouds (which will be millions of points) from a 3D laser? Then we would like to create a solid model of the structures and piping.
View 5 Replies View RelatedAutoCAD LT :: 2012 Runs Slow After Continuous Use?
Dec 21, 2011Ive recently been upgraded from a Laptop to a pc at work with windows 7
When working on drawings, some small some large some with xrefs in but after continued use on the same drawing everything slows down even simple commands like highlighting an object
AutoCAD Inventor :: ILogic DWF Merge
Aug 28, 2013I have an external ilogic rule that creates a set of DWF drawings for all parts and subassemblies (as long as the idw files exist) within and including a main assembly.
I would like to merge all the DWF drawings of the sub assemblies and component parts into the DWF of the main assembly. Is there a method within DWFAddIn that will allow me to merge the files? Is there another way that I can merge the DWF files using the same ilogic rule (one rule to create and merge all DWF's together?)
AutoCAD Inventor :: Merge 2 Parts Together
Mar 20, 2013I have 2 different parts that I created as separate ipt files. I then bring them into an assembly and place them how I want, but they have overlapping material. Is it possible to turn these 2 parts into one part? If yes, how?
View 4 Replies View RelatedAutoCAD 2013 :: Quickpen Pipe Designer For Piping Design
Aug 28, 2012Recently we upgraded to Autocad 2013. We are using Quickpen Pipe Designer over autocad for piping design.We are experiencing, with some drawings, long opening/saving/closing/xrefing delays.
For example, for a 12Mb drawing it took 5minutes for a Save AS, with no exrefs in the drawing, Close with save took 5minutes, to attach and xref took 5 minutes (2minutes to show the attach dialog and 3minutes after).
Quickpen is saying that is because autocad, but we haven’t seen such delay opening regular autocad drawings (drawings without quickpen entities).
We have some other issues with Quickpen, fittings disappearing from the drawing, trying to bring them back, and using regen and zoom extends will change the view to a odd 3d view or mirror the drawing to an odd angle.
Are there any 3d settings to make the drawing be faster?
AutoCAD Civil 3D :: Rule Applies To Pipe Only Runs?
Oct 9, 2013I have a bunch of pipes which are flagged with a warning called "Rule applies to pipe only runs". for these pipes, the pipe proterties window will not report the min and max cover. the pipe rule i have currently set is a "pipe to pipe match" with match location as invert and drop value as zero, and a cover only rule with min cover 2' and max cover 15'. the structure rule i have set has "sump depth" of zero, and a "pipe drop across structure" set as invert reference and a drop value of zero.
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
AutoCAD Inventor :: How To Merge Identical Parts In BOM
Oct 3, 2013I'm having difficulty with the BOM. I have a number of identical parts with different file names from the frame generator and other tools such as mirror. They all show up as individual parts in the BOM.
I have "Enable Row Merge on Part Number Match" cheched and even though their part numbers do match, the rows are not merged.
On on 2011. New Inventor User, recently moved from 2011 to 2014 - Win. 7.
AutoCAD Inventor :: How To Combine / Merge Many Projects Together
Jul 6, 2012I am using inventor 2012 but i am not using Vault, I try to understand how to combine or merge many projects together. I got a retraction system that is one project with his own content center, then i got a hood that is another project with his own content center.
Since im going to create many different retraction system and many different hood in the future, to be used in many different combinations. I want to be able to create a master project that includes smaller projects so i can still work all the projects independently.