AutoCAD Inventor :: Piping Route Will Not Update When Change Dimension
Apr 12, 2013
My piping route will not update when I change a dimension when editing the route itself. See below. I can change a dimension, the 3D sketch of the route will update, but the pipe will not move into the correct position. Doing multiple rebuilds and updates does not update the piping.
IV 2010 Tube & Pipe SP4; ACAD Mechanical 2010;
2.5 ghz Xeon Processor
8 gb RAM
Windows 7 Professional x64
EVGA GTX 560 2gb DDR5
View 7 Replies
ADVERTISEMENT
Nov 16, 2011
How do I create an Inventor part with a cost that will update according to the part dimensions changing. For example, we design products using aluminum extrusions and our cost is determined by foot length. How can I create the extrusion part to have a per foot cost that will dynamically update when I change the parts length for an assembly? It seems to me to be a fundamental need for many industries.
I will happily take any links to information that will explain this process. I cannot find anything online that clearly explains the process of creating parts with costs and variables.
View 1 Replies
View Related
Oct 1, 2013
I am having issues with this. I create the part. I create the drawing. I add the part to the drawing. I make a modification to the part and then I select update(Lighting bolt) and NOTHING HAPPENS. Even when I did the local update.
I will review the rest of the thread tomorrow as I am leaving Inventor for today but this is bugging me!!
I can only see the change when I close the drawing and re-open it as of now.
note: When I do hit the update button it does shown the change for a split second then goes back to its previous state. Why does it not stay the new updated version? Inventor 2012
View 3 Replies
View Related
Sep 22, 2012
I am in inventor and I need to draft up some diagrams for a lab report for school. They all have to be to scale so my dimensions will work properly, the only problem is, when I want to take a screenshot of the image to put into my document, the dimensions are way too **** small. I have tried everything to change them and nothing has worked. I don't know where my command line window is so I can't go directly to dimstyles.
View 3 Replies
View Related
Apr 23, 2013
How to turn off the Auto route function?
View 1 Replies
View Related
Oct 31, 2013
I am having an issue with pipe and tube routing in inventor. I am new to it and every once in a while a route that i create turns red in the browser bar, I also noticed that a few of the routes have issues where the adaptivity gets turned off by itself. I assume this has something to do with the route turning red.
inventor 2014 professional
View 2 Replies
View Related
Jun 24, 2013
I am having a problem with Save AS Copy To DXF.
When I try the 'Save copy as' DXF route it does not function. If I click the save button nothing happens and if I click the option button nothing happens either. In 2012 when you click the options button you would have got the option to change the export settings i.e. all sheets etc...
I do have the option to change the file formats via the drop down box in the 'save copy as' dialogue box and dxf etc are listed!
When I right click on the flat pattern in 'Model' there is no button for 'Export' in the list that appears. Therefore I cannot get to the Flat pattern dxf export options prompt as shown in this thread.
Its obvious you should be able to save as a dxf from an inventor idw as the buttons are there they are just not working!
I am having this problem with Autodesk Design Suite Premium. Inventor 2014 will not give me options, and is having problem exporting to autocad dwg. tried a reinstall as it appears to wotk properly on other similar installed machines.
View 4 Replies
View Related
Sep 12, 2013
Basically i have created a good size IAM and now need to lighten all of the appearances up. Can i change them in the i am and have it update the individual IPT files at the same time? or will i have to open all the ipt files and change it and save?
View 5 Replies
View Related
Jun 3, 2012
I am struggling with projected geometry that is for some reason not updating in sketch when I change sorce element.
I have sketch in ipt file A.ipt
A.ipt is placed in A1.iam.
in A1.iam I create or place B.ipt
in B.ipt I create sketch and project some elements of A.ipt sketch to it.
After any change i sketch in A.ipt file I and up with elements projected to sketch in B.ipt not muchning elements they ware projected from.
I tried I think everything, adaptivity, creating additional points i A1.iam (they update properly but still projection is not updating).
View 9 Replies
View Related
Aug 14, 2013
See the attached image. I'd like to rotate the text of the dimension shown to be horizontal relative to the page.
The best I've found in searching for a solution is here (on the bottom):
[URL].....
however, following those instructions actually changes the dimension value to the distance projected in the plane of the sheet.
View 4 Replies
View Related
Dec 23, 2012
We need re-location the diameter dimension after we change the drawing view's scale. but we didn't know how to change the Startpoint of the dimension (mark with Red word "1"), just find the text location.
Who knows how to set the new point to for the startpoint?
View 6 Replies
View Related
Apr 20, 2013
I like to change the dimension of the length from 388mm to 400mm to represent another similar part with another part number. Yet I still need the old part.
What is the easiest way to do so? When I use 'save as" and then change the dimension, I need to recreate the dimensions in the dwg files. Is there a way to avoid creating the dimensions?
View 3 Replies
View Related
Oct 14, 2009
I'm chasing the syntax on what i hope is a very simple procedure.
We have a project for re-design and manufacture here (Australia) of a machine that has been designed and detailed in one of our US offices. For this reason, we will be wanting all dimensions in mm etc, rather than inch.
My intention is to open the idw(s), update the styles library (done, i think...), change the active standard to "AS Metric" (got the code sorted for that too), and then change all dimensions to AS Metric.
So far i have each of these 3 processes in a different sub, called from a master. But my problem is in changing the style. I could change a dimension's style to match that of another existing style:
Set oGeneralDimensions = oSheet.DrawingDimensions.GeneralDimensions.Item(1)
but I am having trouble setting is to the active style.
My module:
Sub ChangeStyle()
Dim oIDWDoc As DrawingDocument
Set oIDWDoc = ThisApplication.ActiveDocument
Dim oSheet As Sheet
Dim oDim As DrawingDimension
Dim oDimStyle As DrawingStandardStyle
Dim oGeneralDimensions As GeneralDimension
[Code]....
View 9 Replies
View Related
Nov 8, 2012
After creating the route, I can not get it to populate with the actual pipe. How do you get the route to populate with a 1/2" tube or pipe?
View 1 Replies
View Related
Nov 28, 2013
I've authored custom tube and pipe components, published them to library and created a custom tube and pipe style. But when I want to create a route with my custom style I get this error message "Edit route failed". The style only consists of a pipe and 90 elbow. All the other styles seem to work.
I also tried to create a custom style for tubing with bends and it worked fine so I guess it has something to do with my elbow.
View 6 Replies
View Related
Oct 9, 2013
I seem to recall being able to do this in 2013...
Say you've dimensioned something but end up wanting to change the dimension definition points...drag the end point to another location that you want dimensioned.
I thought it used to snap to a new location, but now it will not. I have to redraw the dimension (including all text I added).
Here is what I get when I try to move the dimension definition point:
Here is what I get when I try the auto-reattach feature in "repair". Still nothing to snap to.
View 3 Replies
View Related
Jun 19, 2012
I just started using Inventor and I have this issue, that whenever I set a dimension in a sketch, the sketch doesn't update to the new dimension until I move my mouse/cursor. Is this normal? Is there any way to change it so it updates as soon as I hit the enter button (after entering a dimension)
View 3 Replies
View Related
Jul 31, 2012
I need the dimension of .5 to become .25.It won't work, probably because it is the same dimension of Sheet metal Tickness.
View 3 Replies
View Related
Apr 8, 2011
How do I change the dimension size in sketch mode?
View 4 Replies
View Related
Oct 5, 2012
I have 2 piping runs, each one containing several routes. I need to merge them, to obtain a unique run containing all the routes.
View 2 Replies
View Related
Oct 4, 2012
I was giving an assembly with a lot of piping in it, but the piping wasn't done using the Tube & Pipe. I need to make a drawing of the piping with a BOM. I made an ISO view and turn off the visibility of the parts I didn't need.
My question is if there is way for the BOM to only show the visible parts in my drawings. I know in iAssemblies I can exclude the parts I don't need, but that would take awhile considering there are over a hundred parts in my assembly. I really don't want to redo the piping mainly because of my inexperience with Tube & Pipe.
View 9 Replies
View Related
Feb 21, 2013
Can i change the length of the dimension line 'extension' when my dimension text placement is beside the dimension line (see attached image)?dim line length.jpg
View 6 Replies
View Related
Dec 29, 2010
every one now a day i am making isometric drawings so i m little bit confuse in that i am using dimension and change the oblige angle text of dimension so is it right way or not ????
View 9 Replies
View Related
Oct 1, 2013
I'm trying to show my tube and pipe route sketches in my drawing without populating my routes. In the past my tube and pipe assemblies have caused me and my company many problems. not populating the routes until final release can speed up our process a little bit.
View 3 Replies
View Related
Nov 28, 2012
Using 2013 sp1.1...After I change the hole size in the part, the callout in my hole note does not update. (crazy, I know).
If I pull a new hole note after the change, it has the correct dimension. But, if I change the hole size again, this new hole note does not update.I put the part on a new idw and it updates correctly, so somehow the idw is hosed.
View 2 Replies
View Related
Apr 1, 2010
Is it possible to creat Single Line Isometric from the Piping Model?
View 4 Replies
View Related
Sep 7, 2013
I need a way to add isometric dimensions from the elbow below?
This is how standard piping isometric drawings are done, no need for a front view, top view, etc.
Just all dimensions on one isometric view.
I am creating piping drawings for a Power Station and want to dimension from the intersection of the centrelines of all the elbows on the pipe run (just like dimension 300 and 1282 in the picture below).
I've been able to add dim 300 & 1282 by using "Include Route Centerlines" BUT if there's piping created without a piping route this cannot be done.
I don't understand why I cannot get dimension A & B from the standard work features displayed on the elbow or dimension between two elbows just using these work features?
View 6 Replies
View Related
Jan 25, 2012
When I use Derived Route I get "Minimum Length Violation(Too short to continue)". How can I fix it. Is there any parameter that I can define minimum length.
View 7 Replies
View Related
Nov 5, 2012
Parts generated with the FG can be changed with the 'Change' option within the Frame Generator menu in the Design -tab on the ribbon.
However, when I change the size of the profile thru this menu all properties will be changed according to the settings of the table in the Content Center, except the Description property.
The Description column in the table is configured with the size of the profile and is mapped to 'project.description'.
I'm using Inventor 2013 SP1.1
View 8 Replies
View Related
Dec 14, 2012
I have created a iLogic form for my skeletal part file that drives my assembly. The issues is that it is a few steps to get the assembly to update.
Current Steps: open skeletal part fileuse form to change size parameterssave new skeletal size changesopen assemblypress the update button if changes haven't already been applied...I have tried to link these parameters directly to the assembly and tried to create the form using those linked parameters from the skeletal part file. It looks like it would work, but I am unable to edit the parameters once the form is created.
I am hoping that the I can skip opening and editing the skeletal part file.open assembly fileuse form to change size and dimensions, and all part files and drawings are updated to that new shape and size.
I have tried to create a global Form in the skeletal part file, and tried to update the size changes in the assembly file.I was able to changes the inputs this way, but once I pressed the apply I get an error with no changes. what I want but I am not very up to date on iLogic or these forms. I will be searching Google for now.
View 3 Replies
View Related
Nov 2, 2012
I was looking to change the fonts in a drawing for the Dimensions and Symbols that might have been inserted in the Dimension text entries.
This can be done manually bu editing the dimentions text after placemement, but I was ooking to set this as a default.. I cannot see where exactly this is controlled in the Styles Manager - I am only able to change the Dimension text font but the diameter symbol font is always on AIGDT.
I was therefore looking for an iLogicvb code that could do the trick, but I am not able to even change the dimension fonts... The code runs with no errors but nothing gets updated in the drawing...
Dim oDoc As DrawingDocument
oDoc = ThisApplication.ActiveDocument
Dim oSheet As Sheet
oSheet = oDoc.ActiveSheet
[Code]....
InventorVb.DocumentUpdate()
View 3 Replies
View Related
