AutoCAD Civil 3D :: Export Piping To Cadworx?
Oct 25, 2013The title says it all. I need to get my pipe network into Cadworx in all its 3d glory. What types of formats they accept for importing? (Civil 3D 2013)
View 1 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Views Of Piping
Jan 8, 2014I want to be able to orbit and pan beneath a surface to see the relationship of pipes and structures to the surface. Its as though you were looking up at the ceiling in a room. Using orbit is limited because it flips the surface over (upside down), when trying to view the underside of a surface.
View 3 Replies View RelatedAutoCAD 2010 :: Copy The Same Workspace To Cadworx
Nov 26, 2012We just upgraded to AutoCad 2013 and Cadworx 2013. I have set up a workspace in AutoCad, how can I copy the same workspace to Cadworx. There has to be a easy way to do this.
View 1 Replies View RelatedAutoCAD .NET :: Call GROUPTOG CadWorx Command From Addin Possible
Sep 13, 2013I need to call the GROUPTOG, which is a CadWorx command, from my .Net AddIn. Is this possible, and if so, how would one do it?
View 1 Replies View RelatedAutoCAD 2013 :: Add On Piping Programs
Jun 7, 2012Any good add on PIPING program for AutCad. We've been using CADPIPE, but every time that they do an update, their program changes default settings. It's getting to the point that it's time to look for a program that will work with autocad and not make me have to reset all of my settings every time I start Cadpipe.
View 1 Replies View RelatedAutoCad :: 3D Piping In Plan View
Feb 15, 2013Having issues plotting. I have a sheet with 3d piping in plan view, viewport is set to Legacy Hidden as always. I have a 3DCLIP plane set to only see pipe at a certain elevation. When plotted, some of the pipe lines are missing. If I change the viewport display view, then the piping is fine but random objects show up that shouldn't b/c of my 3DCLIP plane.
View 0 Replies View RelatedAutoCad :: Isometric Piping Drawings
May 14, 2013When I start an Iso drawing should I use the 3D Views under the View tab and set it to SW Isometric or should I use the Snap/Style/Isometric way? I like using the 3D views, but it doesnt set the drawing up the same. What is the accepted procedure.
View 7 Replies View RelatedAutoCad :: How To Draw Piping Isometrics
Aug 10, 2011Drawing Piping Isometrics in Autocad?? I dont have any experience in Isometric Drawings in autocad......
View 6 Replies View RelatedAutoCAD Inventor :: How To Merge 2 Piping Runs
Oct 5, 2012I have 2 piping runs, each one containing several routes. I need to merge them, to obtain a unique run containing all the routes.
View 2 Replies View RelatedAutoCAD Inventor :: Make Drawing Of Piping With BOM
Oct 4, 2012I was giving an assembly with a lot of piping in it, but the piping wasn't done using the Tube & Pipe. I need to make a drawing of the piping with a BOM. I made an ISO view and turn off the visibility of the parts I didn't need.
My question is if there is way for the BOM to only show the visible parts in my drawings. I know in iAssemblies I can exclude the parts I don't need, but that would take awhile considering there are over a hundred parts in my assembly. I really don't want to redo the piping mainly because of my inexperience with Tube & Pipe.
AutoCad 3D :: Adding 1 / 8" Gaskets To Piping
Oct 21, 2011I need to add 1/8" gaskets to flanged piping. My primary reason for doing this is so I can get the correct length for the pipe. I was planning on simply pulling the flanges back and 1/8" but when I do that it stretches the pipe. Is there a way to detach pipe from fitting or fittings from fittings so I can move them independently.
Or could I just add 1/8" gaskets in there somehow. I'm of course working in 3d. autocad 2007. I can always create fab-drawings by just doing the math with the current drawings but I want to try to get it in the model, just in case.
AutoCAD Inventor :: Isometric View From Piping Model?
Apr 1, 2010Is it possible to creat Single Line Isometric from the Piping Model?
View 4 Replies View RelatedAutoCad :: Piping Material Library Including All Dimensions?
Dec 11, 2013i need complete piping material library for Auto CAD which included all dimensions.
View 9 Replies View RelatedAutoCad 2D :: Produce Pump Symbol For Piping Diagram?
Mar 17, 2009i am trying to produce a pump symbol for a piping diagram. 2 polyline arc and a base in 2D. i have added a linear parameter and a scale action however when i scale my block the polyline width changes can i stop this happening ?
View 9 Replies View RelatedAutoCad 3D :: Create Solid Model Of Structures And Piping?
Mar 16, 2012Any program that can accept point clouds (which will be millions of points) from a 3D laser? Then we would like to create a solid model of the structures and piping.
View 5 Replies View RelatedAutoCAD Inventor :: Piping - Isometric Dimensions To Elbows
Sep 7, 2013I need a way to add isometric dimensions from the elbow below?
This is how standard piping isometric drawings are done, no need for a front view, top view, etc.
Just all dimensions on one isometric view.
I am creating piping drawings for a Power Station and want to dimension from the intersection of the centrelines of all the elbows on the pipe run (just like dimension 300 and 1282 in the picture below).
I've been able to add dim 300 & 1282 by using "Include Route Centerlines" BUT if there's piping created without a piping route this cannot be done.
I don't understand why I cannot get dimension A & B from the standard work features displayed on the elbow or dimension between two elbows just using these work features?
AutoCAD Inventor :: How To Make Pipe Branch Off In Piping Run Without Tee Fitting
Feb 28, 2013I'm trying to make a piping run that at one point branches off in another direction. Basically I want to have one straight pipe, a main line, where another pipe branches off and sticks out vertically from it and goes its own way. However, I want this branching pipe to be welded to the main line, not connected with a tee fitting. Inventor won't let me create branches from within a route, and it doesn't seem to want to let me snap to the existing main line run if I create a new run for the branching pipe.
View 5 Replies View RelatedAutoCAD Inventor :: Piping Route Will Not Update When Change Dimension
Apr 12, 2013My piping route will not update when I change a dimension when editing the route itself. See below. I can change a dimension, the 3D sketch of the route will update, but the pipe will not move into the correct position. Doing multiple rebuilds and updates does not update the piping.
IV 2010 Tube & Pipe SP4; ACAD Mechanical 2010;
2.5 ghz Xeon Processor
8 gb RAM
Windows 7 Professional x64
EVGA GTX 560 2gb DDR5
AutoCAD 2013 :: Quickpen Pipe Designer For Piping Design
Aug 28, 2012Recently we upgraded to Autocad 2013. We are using Quickpen Pipe Designer over autocad for piping design.We are experiencing, with some drawings, long opening/saving/closing/xrefing delays.
For example, for a 12Mb drawing it took 5minutes for a Save AS, with no exrefs in the drawing, Close with save took 5minutes, to attach and xref took 5 minutes (2minutes to show the attach dialog and 3minutes after).
Quickpen is saying that is because autocad, but we haven’t seen such delay opening regular autocad drawings (drawings without quickpen entities).
We have some other issues with Quickpen, fittings disappearing from the drawing, trying to bring them back, and using regen and zoom extends will change the view to a odd 3d view or mirror the drawing to an odd angle.
Are there any 3d settings to make the drawing be faster?
AutoCAD Inventor :: Piping And Routed Systems-Style Library Missing?
Sep 9, 2011I'm trying to utilize the piping and routed systems tool to run some pipe, but when I setup my pipe styles, it cannot find the xml files for the pipe, fittings, etc. I know I am connected to my content server as I can insert individual fittings and manually place pipe lengths. I am running Inventor Professional 2009
View 6 Replies View RelatedAutoCAD Civil 3D :: Export Created Surface From Civil To Revit Architecture
Dec 17, 2013Is it possible to export created surface from civil to revit architecture? If yes , How? And if its not possible - maybe i can somehow import cogo points to revit?
View 6 Replies View RelatedAutoCAD 2010 :: Background Masking In Mtext To Cover Up Mechanical Piping In Drawings
Jun 5, 2013I have been using background masking in Mtext to cover up the mechanical piping in our drawings. It works fine in AutoCAD, but we convert the drawing to pdf and then send the pdf to the printer to make prints. Now
the background masking is not working. You get a line going through the text.
AutoCAD Inventor :: Display Leather Cover On Cushions With Pull Lines For Piping Detail
Feb 8, 2013I design cushions for airplane seats and am trying to display a leather cover on the cushions with pull lines for piping detailing. etc. I am also wondering if a leather material style is availble for DL online.
View 3 Replies View RelatedMaya Modeling :: Show Piping In A Tank
Mar 20, 2012I have modeled a tank(storage) and i need to show some of the piping that is inside the tank. I tried removing some faces and extruding the edges, then some beveling, to show some thickness but that really messes up the smoothing around the hole. Is there a better way to do this to maintain the smoothness?
View 6 Replies View RelatedAutoCad :: Dynamic Piping Blocks - Inserting And Linking A Flange Block To Pipe Block?
May 21, 2013I have created d/blocks for my different pipe sizes i.e one block with a dropdown to select the different sizes and have done the same for my flanges. now how do I link / insert the flange d/block to the piping block so that I can export the information into a material list later on.
View 1 Replies View RelatedAutoCAD Inventor :: Calculating Tube Length (not Tube And Piping)?
Mar 16, 2013I have a question about calculating the maximum tube length. Why do i ask this, because you can just measure it on drawing?
I'm building a parametric model for building simple storage tanks, and the goal is to get a complete BOM out of the model without any difficulties.
I have 4 possibilities of tube positioning on the tank. (see image)
1. A tube that stands in the center of the axis of the main tank.
2. A tube that stands in the center of the axis of the main tank, but under an angle
3. A tube that doesn't stand in the center of the axis of the main tank.
4. A tube that doesn't stand in the center of the axis of the main tank, but under an angle
These 4 possibilities can be flush with the inside of the tank or not.
Is there a easy way to determinate the longest point from the front of the tube? This longest measurement will be the length i need to get into my description for the BOM.
AutoCAD 2013 :: Developing Connected Piping System In 2013
Dec 3, 2013how can I develope a proper piping system just like the one in the attached picture in AutoCAD 2013.
As you can see the tubes aren't that greatly connected.
Each tube is blocking the pathway of the other tube.
I need them to be all connected.
The reason why, is because I will be later using this design in Inventor Fusion and Simulation CFD to have fluid in the tubes.
AutoCAD Dynamic Blocks :: Piping Dynamic Block
Oct 6, 2011The block is a piping with various links that back together and they should stay behind each other, they are not go over each other otherwise the spacing is not good after data extraction.
The distance between not less than 100 mm and the total length should not exceed 5000mm are. Furthermore, they are relatively movable from each other.
I've been working with linear parameters and constraints, but that's not good as far as I know I can not apply visibility later with links that point to the other side.
AutoCAD Civil 3D :: Export To DXF
Feb 5, 2013Why does Exporting to DXF (any version other than 2013) fail, every single time?
First, we always get this error during the save. The save appears to finish OK in spite of the error.
But when you try to open the DXF using DWG Trueview, we get this error.
If we export out to 2013 DXF, the resulting file can be opened, but this doesn't do us much good.
(using C3D 2013 with latest SP)
AutoCAD Civil 3D :: Export To HEC RAS
Jun 27, 2013I have AutoCAD Civil 3D 2010, and I want to export some sections to HEC RAS, but I can't find the tool that allows me to do that, how can I find it?
View 1 Replies View RelatedAutoCAD Civil 3D :: Export XML Contours Not The Same?
Nov 27, 2012i'm exporting a surface from 2013 to be used in 2010 for presentation. works great but the contour interval is not the same as the surface i'm exporting. working in 5/25 contours...xml import comes in with 2/10 contours. looked for a setting but can't seem to find.
View 2 Replies View Related