AutoCAD Civil 3D :: Export To HEC RAS

Jun 27, 2013

I have AutoCAD Civil 3D 2010, and I want to export some sections to HEC RAS, but I can't find the tool that allows me to do that, how can I find it?

View 1 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Export Created Surface From Civil To Revit Architecture

Dec 17, 2013

Is it possible to export created surface from civil to revit architecture? If yes , How? And if its not possible - maybe i can somehow import cogo points to revit?

View 6 Replies View Related

AutoCAD Civil 3D :: Export To DXF

Feb 5, 2013

Why does Exporting to DXF (any version other than 2013) fail, every single time?

First, we always get this error during the save. The save appears to finish OK in spite of the error.

But when you try to open the DXF using DWG Trueview, we get this error.

If we export out to 2013 DXF, the resulting file can be opened, but this doesn't do us much good.

(using C3D 2013 with latest SP)

View 9 Replies View Related

AutoCAD Civil 3D :: Export XML Contours Not The Same?

Nov 27, 2012

i'm exporting a surface from 2013 to be used in 2010 for presentation. works great but the contour interval is not the same as the surface i'm exporting. working in 5/25 contours...xml import comes in with 2/10 contours. looked for a setting but can't seem to find.

View 2 Replies View Related

AutoCAD Civil 3D :: How To Export SHP File To TXT

Jul 22, 2013

How to export shp file to txt,,,i want to x,y,z format from shp file.,,

View 6 Replies View Related

AutoCAD Civil 3D :: Export To PDF Function

Feb 8, 2013

I am trying to use the "Export to pdf" function as opposed to plotting as a pdf because the "Export" function seems to make a much smaller file size. However, when I "Export to pdf" some of my layers are not showing up in the created pdf.

The pdf created when I plot to pdf looks fine. I am using the "current layout" and "current" page setup options in the "Export to pdf", so it is using the same plotting options as plot to pdf, but the "Export" function is not displaying some layers.

View 5 Replies View Related

AutoCAD Civil 3D :: Export To DGN Conversion

Feb 13, 2012

I am trying to convert multiple Civil 3D 2011 files to Microstation XM, but when I save the files down to Autocad 2000 and then export to DGN. I cannot get the alignment stationing to show up in my files.

View 9 Replies View Related

AutoCAD Civil 3D :: How To Export Surface To XML

Aug 7, 2012

how to export surface to XML

Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB

View 2 Replies View Related

AutoCAD Civil 3D :: Cannot Export To Format

Nov 22, 2010

I'm trying to export a C3D 2010 drawing to Autocad 2007 format, and it's failing with the following error: So what does that mean?  After all, I'm EXPORTING TO AUTOCAD FORMAT, which I thought would convert things to "plain AutoCAD format". 

View 9 Replies View Related

AutoCAD Civil 3D :: Export To DWG Not Working?

Jan 25, 2012

I am having a problem with one of our draweings, when I select Export > Autocad DWG 2010, nothing happens.  I have tried opening another Civil 3D drawing, and it works fine.  I can see the command on the command line, but no error or anything after it, just does not do anything.

View 9 Replies View Related

AutoCAD Civil 3D :: Export Blocks INSIDE Of Another DWG?

Aug 13, 2013

Is there any way to export blocks INSIDE of another dwg?

Background info:

At my company, we have a series of template .dwgs that get copied every time a new project is created.  We update the template files as we create new blocks, styles, etc...

When I'm working in a specific project and create a useful block, it would be nice to export that into the template file without having to open the template drawing and insert/redefine it.

View 4 Replies View Related

AutoCAD Civil 3D :: Pressure Network Export

Sep 10, 2013

Is there some way a person can export the pressure network in c3d 2014 to a 3d model (3ds,revit,IMX)?  IThis can be done with the sewer network but no joy on the pressure network. I would really like to use Infrastructure modeller to assist in the design of our project.

I really like the new tool for pressure networks, but the fact that I cant export a 3d model.

View 1 Replies View Related

AutoCAD Civil 3D :: Export To DWG 200x Limitations?

Jul 18, 2012

I have tried the "export to dwg" command and when on "simple" drawings behaves properly.

on some others though (dwg's with shortcuts/alignments/surfaces/corridors/xrefs in any combination) will not export any file. Are there limitations to it tha I should be aware of?

(I'm using AutoCAD Civil 3D 2013)
MacBook Pro, Intel Core i7 CPU M 620@2.67GHz, 8GB RAM
W7Pro SP1, 64-bit / Civil3D 2013

View 8 Replies View Related

AutoCAD Civil 3D :: Export Styles To New Empty DWG

Jul 29, 2013

I had this working in C3D2011 but after having severe issued with it in 2014 I went back and tested in 2012 & 2013 where it failed as well.

If I collect all supported styles using C3D 2014 & SincpacC3D's Export Styles command and export them to a newly created Database, when trying to open that new drawing it will crash C3D with no CER. Trying to run Recover on it results in a few screen flashes and back to the original drawing/screen and no opening of that new file. However, if I limit the selected styles to Export to just label styles, the drawing opens but I get this warning:

But wait, C3D2014 IS the latest version! What the heck is going on inside that code? I cannot show the full code, but the gist of it is that creating and saving a new DWG file is pretty straight forward. As soon as I add in the StyleBase.ExportTo(exportIds, outDb, dupHandler); the file becomes highly unstable.

Again, this worked well at one time, but it sure is not now and I cannot find any reason for it to be creating these bad drawings.

View 5 Replies View Related

AutoCAD Civil 3D :: Export Piping To Cadworx?

Oct 25, 2013

The title says it all. I need to get my pipe network into Cadworx in all its 3d glory. What types of formats they accept for importing? (Civil 3D 2013)

View 1 Replies View Related

AutoCAD Civil 3D :: Export To DWG - File Not Saved

Nov 13, 2012

I´m trying export to dwg, and I can see all the process, but the export file is not saved.

I´m using the Autocad Civil 3D 2013 and this just happens in one specific file.

View 9 Replies View Related

AutoCAD Civil 3D :: Export Geo-referenced Image

Sep 27, 2012

I've lined up an image myself in Civil 3D over a topographical survey but now I want to export the image as a geo-referenced image so it can be brought into Mapinfo and Tuflow in the right place, coordinate-wise.

My question is - is it possible, and how do you do it!

View 5 Replies View Related

AutoCAD Civil 3D :: Export To Google Earth

May 9, 2012

Months back I did this project with multiple surfaces and exported them to Google Earth with no problem. Today, I'm trying to update a surface with some changes. After the changes, I tried to re-export it to Google Earth, but for some reason it's coming in really small. I have my units and zones set to what they have always been.The surface is highlighted in yellow, but it should take up roughly the size of the red circle.

View 3 Replies View Related

AutoCAD Civil 3D :: Export Coordinates From A Corridor

Feb 24, 2013

Here is the problem; corridor and its surface, etc are designed but there is no "obvious" way to get coordinates in order to layout the road in the field. There is the option to get COGO points from corridor via "create COGO POINTS" / "CREATE GROUND DATA" but this option refers only to points based on baseline in any station of the corridor and not in any station i would like to.

View 5 Replies View Related

AutoCAD Civil 3D :: How To Export RXL File To Computer

Mar 12, 2013

I cannot find a function in 2011 Civil 3d to export an alignment as an. RXL file onto the computer.  I know that I can export an RXL directly into a Survey Controller via Trimble Link. 

View 3 Replies View Related

AutoCAD Civil 3D :: Export Polyline To Shp File

Jan 13, 2010

I am able to export to SDF but I get nothing when trying to go the two shp formats available. was a "parcel", but i exploded to polyline.

Do i need a patch to make this work? I am a C3D newbie and am struggling wit h user interface, but know that map export command line looks like it is supposed to work.

View 5 Replies View Related

AutoCAD Civil 3D :: Export Layout Crashes

Oct 11, 2013

I have a Civil 3D project with piping networks, grading etc.  The servicing and grading plans are on layout tabs (5 of each 10 in total).  When I would go export layout Civil 3D would go into not responding mode and crash.  This caused quit a bit of stress as we had to get the drawings out to meet a deadline.  

After investigating this issue, we identified that we had save our layer states in the layer manager.  Delete the viewport on the layout tabs, draw a new viewport and then reinstate the layer states for each layout.  This resolved, the crashing issue. 

Civil 3D 2013
Windows 8
Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz
32. GB
64-bit Oepration System, x64-based processor

View 9 Replies View Related

AutoCAD Civil 3D :: Export Shape Files From GIS To It

Sep 5, 2012

In Civil 3D, what is the best method to import ESIR GIS shapefiles or geodatabases into an existing CAD drawing?

It is possible to export shape files from GIS to CAD, but how within Civil 3D, are shape files imported into a drawing?

View 4 Replies View Related

AutoCAD Civil 3D :: Export Selected Objects Only?

Sep 28, 2012

I'm in a situation where i have to export a civil3d 2013 drawing to autocad 2000, but i don't want to send everything in the drawing, just the final drawing from model space.  is there a way to not need export the drawing and then delete the objects i don't want to send?  It seems like a simple task but i work with some people that can't handle simple things like that, so aside from trying to find new co-workers, what can i do?

View 9 Replies View Related

AutoCAD Civil 3D :: Way To Export Variety Of Different Objects Into 3D Max

Sep 23, 2011

I've been working on trying to find the best way to export a variety of different Civil3d objects into 3ds max.  The one object type that seems to continue to evade me are pipe networks. Any good way to export these to 3ds max?  I don't care about having them dynamically linked so much as rendering the part materials in model as they show up in Civil3d.

View 3 Replies View Related

AutoCAD Civil 3D :: Export A Surface To Agtek?

Jun 8, 2012

Possible to export a Civil 3d Surface to Agtek?

View 9 Replies View Related

AutoCAD Civil 3D :: Export Surface To GIS Revisited

Jun 22, 2012

I extracted the points and TIN lines from a surface and tried to export, but got 0 elevation back.

I map exported the points, selecting points added object data and selected elevation, but upon map import all the points came in at elevation 0. Same thing with the 3d faces.

View 1 Replies View Related

AutoCAD Civil 3D :: Export SSA To 2013 Via (LandXML)?

Jul 27, 2012

I exported my pipes from c3d 2013 to SSA 2013 but when I export them back to c3d via landxml the pipe network falls in wrong coordinates too far from my project area. same problem appears in c3d 2012

Civil 3D 2013 64bit SP1
Elitebook 8540w
Core i7 2.8GHz, 8Gig RAM
NVIDIA Quadro FX880
160Gb SSD

View 3 Replies View Related

AutoCAD Civil 3D :: Export Section Information To CSV

Nov 27, 2012

My Engineer has a Hec-ras file that he has been working on and I need to change some of the sections. I don't want to re-export all of my sections to a .goe file and lose the work he has already carried out.

Is there any way of exporting the necessary sample line information into a CSV file, as I believe this will be the best way to make the changes to the hec-ras data without losing the work which has already been carried out.

View 2 Replies View Related

AutoCAD Civil 3D :: Using Export To DEM Functionality For Surfaces?

Feb 21, 2013

Using the export to DEM functionality for surfaces?

My understanding is that it is supposed to use USGS dem format, but I'm having trouble getting the resulting dem to show up intact in ArcGis. The extents are off and it chopped off the northern half of the site...?

I think this is a Coordinate System issue, but can't figure out where I can change anything...

two screenshots attached. one shows surface in CAD, the other in GIS.

View 9 Replies View Related

AutoCAD Civil 3D :: Export Geo Technical Modules Object

Aug 19, 2013

It seems that the object was created by the Geotechnical modules.  It cannot be exported to AutoCAD. I tried to use the command "Export or Explode", all object will be disappeared e.g. borehole onto the profile, geologies contour line onto the profile… after clicked the commands.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved