I am trying to convert multiple Civil 3D 2011 files to Microstation XM, but when I save the files down to Autocad 2000 and then export to DGN. I cannot get the alignment stationing to show up in my files.
View 9 RepliesI have finished a project for broadcasting. Now it is going to be used for cinema use as well.
How should i go about it? Export a normal ProRes4444 and that is it? Or how could i (and should i) flip it into XYZ colourspace before exporting?
I want to deliver the material that gives the least risk of error during the image conversion.
I have a client that required us to give them a surface that they could load into microstation. I have version c3d2010. I gave them a land xml file. When they uploaded it into their program, which I believe is inroads they said the contours it generation for the surface looks great in the middle, but the edges it seems to have dropped the elevations to zero.
I did make a boundary to go around the surface to clean up any errant triangulation lines. The polyline I used is at elevation zero. I don't know if this is causing that? The client thinks the inroads is forcing the edges to be elev zero. She has limited knowledge of land xml files and has never used them till now.
Something to change on her end or is it my polyline causing this?
how to create a new datum conversion, but it has six parameters...It is a similarity transformation i want to put in a new configuration.
following data are:
centroid: x=453106; y=7076452
traslation in X=-179.2
traslation in Y=-386.302
scale in ppm= -832.154
ang in rad = 2.5*10^6
We use Civil 2012.Under Drawing Utilities>Drawing Settings we change International Foot to US Survey Foot. The problem is this setting appears to be per drawing. Is there a way to set it up to remember this setting....system variable I can set in the acadoclisp?
View 5 Replies View RelatedIs it possible to turn off or disable the coordinate or drawing conversion on import. I know I can turn it off in a dwg file but I want to completely disable it no matter what the setting is in the dwg file.
View 9 Replies View RelatedI am trying to convert point data from NAD83 State Plane Coordinates to UTM coordinates.
View 3 Replies View RelatedI have a coworker who is converting a Civil 3D drawing down to "plain" AutoCAD.
In the orignal drawing, there are wipeout frames that are turned off, but when you open the converted drawing, they are turned ON.
Is there anyway to ensure the frames will be turned off in the converted drawing without having to open the drawing? I have a theory that the AECTOACAD command must use a particular template file when converting the drawing down, and that it would be a simple matter of making sure the frames are OFF.
I received a 2013 dwg file and want to convert it to 2011. I am currently running C3D 2011. I used the DWG TrueView program and was able to convert the 2013 file to 2011, but none of the alignments, profiles or corridors converted over. How to convert a 2013 file to 2011 and get the alignments, profiles, corridors, etc., to convert over as well?
View 3 Replies View RelatedI'm would like to know about conversion for those Global Coordinate System . For example : (Country : Australia , region Perth) I have AHD PCG94 Coordinate system as follow [ 44650.59 E , 202428.59 N ] & [ 44673.43 E, 202414.57 N ] . How to convert those coordinate system to suit the object into my current drawing with MGA94 (Zone 50) with Civil 3D software ? Or AutoCAD MAP which partially integrate in Civil 3D might work with this ?
View 4 Replies View RelatedI was given a file with LDT points in it that show point#,Elev, Desc. When I convert the description turn into a number. How does that happen and how can I change it to convert the description correctly?
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
Is it possible to export created surface from civil to revit architecture? If yes , How? And if its not possible - maybe i can somehow import cogo points to revit?
View 6 Replies View RelatedWhy does Exporting to DXF (any version other than 2013) fail, every single time?
First, we always get this error during the save. The save appears to finish OK in spite of the error.
But when you try to open the DXF using DWG Trueview, we get this error.
If we export out to 2013 DXF, the resulting file can be opened, but this doesn't do us much good.
(using C3D 2013 with latest SP)
I have AutoCAD Civil 3D 2010, and I want to export some sections to HEC RAS, but I can't find the tool that allows me to do that, how can I find it?
View 1 Replies View Relatedi'm exporting a surface from 2013 to be used in 2010 for presentation. works great but the contour interval is not the same as the surface i'm exporting. working in 5/25 contours...xml import comes in with 2/10 contours. looked for a setting but can't seem to find.
View 2 Replies View RelatedHow to export shp file to txt,,,i want to x,y,z format from shp file.,,
View 6 Replies View RelatedI am trying to use the "Export to pdf" function as opposed to plotting as a pdf because the "Export" function seems to make a much smaller file size. However, when I "Export to pdf" some of my layers are not showing up in the created pdf.
The pdf created when I plot to pdf looks fine. I am using the "current layout" and "current" page setup options in the "Export to pdf", so it is using the same plotting options as plot to pdf, but the "Export" function is not displaying some layers.
how to export surface to XML
Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB
I'm trying to export a C3D 2010 drawing to Autocad 2007 format, and it's failing with the following error: So what does that mean? After all, I'm EXPORTING TO AUTOCAD FORMAT, which I thought would convert things to "plain AutoCAD format".
View 9 Replies View RelatedI am having a problem with one of our draweings, when I select Export > Autocad DWG 2010, nothing happens. I have tried opening another Civil 3D drawing, and it works fine. I can see the command on the command line, but no error or anything after it, just does not do anything.
View 9 Replies View RelatedIs there any way to export blocks INSIDE of another dwg?
Background info:
At my company, we have a series of template .dwgs that get copied every time a new project is created. We update the template files as we create new blocks, styles, etc...
When I'm working in a specific project and create a useful block, it would be nice to export that into the template file without having to open the template drawing and insert/redefine it.
Is there some way a person can export the pressure network in c3d 2014 to a 3d model (3ds,revit,IMX)? IThis can be done with the sewer network but no joy on the pressure network. I would really like to use Infrastructure modeller to assist in the design of our project.
I really like the new tool for pressure networks, but the fact that I cant export a 3d model.
I have tried the "export to dwg" command and when on "simple" drawings behaves properly.
on some others though (dwg's with shortcuts/alignments/surfaces/corridors/xrefs in any combination) will not export any file. Are there limitations to it tha I should be aware of?
(I'm using AutoCAD Civil 3D 2013)
MacBook Pro, Intel Core i7 CPU M 620@2.67GHz, 8GB RAM
W7Pro SP1, 64-bit / Civil3D 2013
I had this working in C3D2011 but after having severe issued with it in 2014 I went back and tested in 2012 & 2013 where it failed as well.
If I collect all supported styles using C3D 2014 & SincpacC3D's Export Styles command and export them to a newly created Database, when trying to open that new drawing it will crash C3D with no CER. Trying to run Recover on it results in a few screen flashes and back to the original drawing/screen and no opening of that new file. However, if I limit the selected styles to Export to just label styles, the drawing opens but I get this warning:
But wait, C3D2014 IS the latest version! What the heck is going on inside that code? I cannot show the full code, but the gist of it is that creating and saving a new DWG file is pretty straight forward. As soon as I add in the StyleBase.ExportTo(exportIds, outDb, dupHandler); the file becomes highly unstable.
Again, this worked well at one time, but it sure is not now and I cannot find any reason for it to be creating these bad drawings.
The title says it all. I need to get my pipe network into Cadworx in all its 3d glory. What types of formats they accept for importing? (Civil 3D 2013)
View 1 Replies View RelatedI´m trying export to dwg, and I can see all the process, but the export file is not saved.
I´m using the Autocad Civil 3D 2013 and this just happens in one specific file.
I've lined up an image myself in Civil 3D over a topographical survey but now I want to export the image as a geo-referenced image so it can be brought into Mapinfo and Tuflow in the right place, coordinate-wise.
My question is - is it possible, and how do you do it!
Months back I did this project with multiple surfaces and exported them to Google Earth with no problem. Today, I'm trying to update a surface with some changes. After the changes, I tried to re-export it to Google Earth, but for some reason it's coming in really small. I have my units and zones set to what they have always been.The surface is highlighted in yellow, but it should take up roughly the size of the red circle.
View 3 Replies View RelatedHere is the problem; corridor and its surface, etc are designed but there is no "obvious" way to get coordinates in order to layout the road in the field. There is the option to get COGO points from corridor via "create COGO POINTS" / "CREATE GROUND DATA" but this option refers only to points based on baseline in any station of the corridor and not in any station i would like to.
View 5 Replies View RelatedI cannot find a function in 2011 Civil 3d to export an alignment as an. RXL file onto the computer. I know that I can export an RXL directly into a Survey Controller via Trimble Link.
View 3 Replies View RelatedI am able to export to SDF but I get nothing when trying to go the two shp formats available. was a "parcel", but i exploded to polyline.
Do i need a patch to make this work? I am a C3D newbie and am struggling wit h user interface, but know that map export command line looks like it is supposed to work.