Is it possible to turn off or disable the coordinate or drawing conversion on import. I know I can turn it off in a dwg file but I want to completely disable it no matter what the setting is in the dwg file.
View 9 RepliesI am trying to convert point data from NAD83 State Plane Coordinates to UTM coordinates.
View 3 Replies View RelatedI'm would like to know about conversion for those Global Coordinate System . For example : (Country : Australia , region Perth) I have AHD PCG94 Coordinate system as follow [ 44650.59 E , 202428.59 N ] & [ 44673.43 E, 202414.57 N ] . How to convert those coordinate system to suit the object into my current drawing with MGA94 (Zone 50) with Civil 3D software ? Or AutoCAD MAP which partially integrate in Civil 3D might work with this ?
View 4 Replies View Relatedwhen I import PNEZD format .csv using import wizard the coordinates get transformed. all points are shifted about 20' in northing and 5 feet in easting. I have to use the import wizard w/ survey database in order to process linework codes.
View 5 Replies View RelatedMapimport command maintains integrity of x,y coordinates. Adding dem information to a civil3d TIN surface does NOT.
Detailed screen shot(s) attached.
Detailed:
I am trying to create a tin surface in autoCAD from a raster dataset in GIS. Originally, my raster dataset was in UTM's (Zone 10N), and my CAD drawings were in CA State Plane (zone 2, US feet). Both NAD83. But I have, to date, been unable to get AutoCAD to correctly convert between these two coordinate systems. I thought, hmm.. let's just convert to State Plane in GIS and then add to the surface definition in AutoCAD. I had hoped this approach would 'go easy' on autoCAD as it would not need to do any conversions. Turns out, that does not appear to work either. In fact, it is even further 'off' than before... I hope the attached PDF illustrates the situation clearly. AutoCAD's mapImport command works great. The surface boundary can be imported and appears to have the correct coordinates. The surface, with the dem added to the definition, however, does not. It is shifted down and to the left.
I get an error message when I load a map with Map 2009 (XP) that was last saved by 2012 (Win7 x64). The error message is this:
Warning: Drawing {drawing name} was created with a version of coordinate system {coordinate system name} that is different from the version installed on your system. Coordinate conversion operations may generate incorrect results.
I tried opening and saving it with 2009 but the error persists. What causes this error and what can be done about it?
How do I add my own system in Civil3d? We have a little strange system here with a deformation model, but I suggest that isn't a problem.
View 2 Replies View RelatedI'm finding myself on more and more sites that use multiple coordinate systems and height datums.
We have 3 on this job. One is the MGA zone 50 GDA94, another is just an offset of this and the third is a strange local grid with offsets and rotations.
We have Excel spreadsheets that can convert between the systems, but that requires several extra steps per point.
Is it possible to define each coordinate system in one drawing so that I could select which system I wanted to use, input the points and then select the main coordinate system so it converts the coordinates directly? It would mean less steps and I would have greater confidence in this system.
We have the parameters for all systems.
Each time an @ is entered at the command line, C3D is freezing for up to 15 seconds before allowing the comand to continue. It wasn't happening last week and no changes have been made to the instalation. What could be causing this glitch?
View 1 Replies View RelatedIf I set up my Civil 3D drawing in some known coordinate system, e.g. State Plane, in the "drawing settings", can I then toggle my drawing into other known systems, e.g. UTM, by changing the coordinate system under "drawing settings"?
If not, how are the coordinate settings used?
I want to have a piece of text added to the drawing notes that uses a field (or similar), to list the coordinate system code assigned to the drawing, i.e. UTM83-12.
Any setvar or something that I can use?
There are load of different coordinate systems to choose from, and I don’t want to have to manually enter it for every drawing.
I have a problem with different coordinate systems. I have a drawing in old Finnish coordinate system (KKJ, kaista 4) and I have a point file, which is made in ETRS-GK29 coordinate system. When I try to transfer the points to the drawing, the points will land way off from the drawing or I get this error message "Coordinate transformation from ETRF89.FinlandGK-29 to FINL-KKJ4 failed for point located at {29511662.554000,6948599.365000}. This usually indicates the point falls outside the boundaries of the destination coordinate system". I have checked and the point {29511662.554000,6948599.365000} should be over the drawing.
View 3 Replies View RelatedMy group is trying to convert a dwg from one coordinate system to another. The original drawing contains points, blocks, etc. in 1 system and we need it in a different one. We tried attaching the dwg to a new map with the new system using a layer query, but this did not appear to bring in the objects into the new system.
"Structures" is in the original system (OR83-NF), "StructuresHarn" is in the desired system (ORHP-NIF)
P.S. C3D 2011
Civil 3D 2013, HF3.0
Windows 7, 64-bit, SP1
I am using Civil 3D and Map 3D 2010.
I have some points in a drawing set up in a coordinate system and using a specified point file format, I successfully exported them to another coordinate system for use by our surveyors. I also wanted the pipe route in my destination drawing so I created a shp file from a polyline representing the pipe route in the original drawing using Map 3D Export. When I imported the shp file into my destination drawing there appears to be a slight horizontal difference from the point locations. The shp file doesn't land directly on the points.
To try another comparison, I ran a query on the pipe route to perform a manual coordinate system transformation. The result of this is the exact same as the shp file.
My questions are, which method (exporting points vs. shp files) results in the correct coordinate transformation and why are they different? When exporting points I am not using any specific transformation settings, I am simply selecting the destination coordinate system. When exporting a shp file, Map 3D creates a prj file from the specified coordinate system in the drawing. Are there any other settings I need to adjust to get the same result with both processes? The only thing I can think of is I only have the coordinates out to 4 decimal places in my point file format, do I need to go out farther?
I have a created a TIN surface with a DEM file. Drawing coordinates are State Plane NAD 83 feet. DEM file coordinates are UTM NAD27 meters. Surface is shifted approx. 835 miles east.
View 7 Replies View RelatedI have some problem with paste to original coordinate that it appears as grey in right click as shown in attached file but it can paste from ribbon.
View 7 Replies View RelatedMy Civil 3D 2012 coordinate systems normally displayed on the units and zone tab of the drawing settings have disappeared. On existing drawings the coordinate system code is still displayed. On new drawings the code appears as a symbol - a period or a comma or something. I can enter the coordinate system code and the program recognizes it.
My Civil 3D 2011 coordinate systems display as expected.
WP7,SP1, 64-bit, Civil 3D 2012
How can I show coordinate on Civil 3D? I inserted a map from Google earth and I want the coordinate to be there.
Civil 3D 2012 SP1
8 GB Ram
i7-2630 @ 2.0 GHz
64 Bit Window 7 OS
I have a client that required us to give them a surface that they could load into microstation. I have version c3d2010. I gave them a land xml file. When they uploaded it into their program, which I believe is inroads they said the contours it generation for the surface looks great in the middle, but the edges it seems to have dropped the elevations to zero.
I did make a boundary to go around the surface to clean up any errant triangulation lines. The polyline I used is at elevation zero. I don't know if this is causing that? The client thinks the inroads is forcing the edges to be elev zero. She has limited knowledge of land xml files and has never used them till now.
Something to change on her end or is it my polyline causing this?
I am trying to convert multiple Civil 3D 2011 files to Microstation XM, but when I save the files down to Autocad 2000 and then export to DGN. I cannot get the alignment stationing to show up in my files.
View 9 Replies View RelatedI am a new user of civil 3D 2012. How to write a new coordinate category in my computer.
I am using a 64 bit windows 7 and everytime I attempt to write a new coordinate system category it always display the words " no access to write to the dictionary".
If you have a dwg that is, say, done in west zone but some agencies want you to provide a table of west and east zone coordinates is there a transform function that will do this in a label?
I would still wan everything in the dwg to be in west zone but be able to display coordinate values in other zones.
I've been using the COGOEditor in civil 3D 2012. I enter a description for each entry. The description does not get saved. If i open the traverse file using a text editor, enter a description, save it, then reopen in COGOEditor, I still don't see any descriptions.
View 6 Replies View RelatedI have Points in Civil 3D that are in the Washington State South Zone NAD 83 Coordinate System and would like to get these points converted to Washington State North Zone NAD 83 Coordinate System. I am able to convert drawings entities to the new coordinate system using MAPEXPLORER but the points do not go with it.
View 4 Replies View RelatedI have 50+ project sites scattered along a 600+ mile alignment. My alignment reference drawing coordinate system is set to a UTM coordinate system. My project site drawings are set to state plane coordinate systems. Does coordinate transformation automatically occur with data references?
View 1 Replies View RelatedWe are having a bit of a debate in our office. When you are working on civil engineering project where you are recieving files form Architects and Landscape Architects, and sending out "Dumbed Down" AutoCAD files to folks who don't have Civil3d, do you change your Civil3d Coordinate System to survey feet & specify your state plane coordinate system?
View 1 Replies View RelatedI have created a custom coordinate system in AutoCAD Civil 3D 2012 using MAPCSCREATE command. My issue go figure is I created it incorrectly and now I want to delete it out of the system.
View 2 Replies View RelatedI think this problem started after installing C3D 2012, and I don't think it's related to the UAC problems. I tried asking my reseller about it, but got no answer.
This happens with all projects that use Custom Coordinate Systems created in C3D 2011 or earlier. When opening the drawing and going into "Drawing Settings", I get this, and have to click seven times through the error box to finally have it do nothing:
Then, if I go back to Drawing Settings, I see this:
Notice how most of the dialog box settings are missing.
This stuff all worked fine for years, but seems to have gotten broken as soon as I installed C3D 2012, and is still broken in C3D 2013.
I just installed AutoCAD Civil 3D 2012 last week from upgrading from 2011. I just noticed that when I set up a new drawing coordinate system for a horizontal datum, I get a message "Coordinate System Code is not Valid". I know the files are loaded under the documents and settings folder, but I don't know why it's not reading them.
View 2 Replies View RelatedWhen assigning a coordinate system to my drawing in Civil 3D 2013, the drawing does not retain the selected system.
I choose the coord system I want in Map Setup and apply it (in this case MT83IF). After applying to the drawing I go back to verify the selected coordinate system and the dialog box indicates "N/A". The only workaround I can find is to save the drawing back to an earlier version and open it on another computer in the office that is running 2011. There I can assign my coord system and then reopen in 2013 where it now shows it properly assigned.
I have tried other coord systems to make sure it isn't isolated to just the one I am selecting - and it happens with all others I try. I have also tried a repair on my install to see if that would correct it to no avail.
I have a 64 bit system and have installed all service packs to date.
I have a custom coordinate system defined and would like to send it out to a client, since they're having trouble creating a new coordinate system based on my parameters. Is it possible to sent that as a file so they can copy it to the appropriate folder or is it embedded in a database somewhere?
View 1 Replies View Related