AutoCAD Map 3D :: Coordinate Conversion Operations May Generate Incorrect Results
Aug 2, 2012
I get an error message when I load a map with Map 2009 (XP) that was last saved by 2012 (Win7 x64). The error message is this:
Warning: Drawing {drawing name} was created with a version of coordinate system {coordinate system name} that is different from the version installed on your system. Coordinate conversion operations may generate incorrect results.
I tried opening and saving it with 2009 but the error persists. What causes this error and what can be done about it?
View 1 Replies
ADVERTISEMENT
Feb 21, 2012
I am using Civil 3D and Map 3D 2010.
I have some points in a drawing set up in a coordinate system and using a specified point file format, I successfully exported them to another coordinate system for use by our surveyors. I also wanted the pipe route in my destination drawing so I created a shp file from a polyline representing the pipe route in the original drawing using Map 3D Export. When I imported the shp file into my destination drawing there appears to be a slight horizontal difference from the point locations. The shp file doesn't land directly on the points.
To try another comparison, I ran a query on the pipe route to perform a manual coordinate system transformation. The result of this is the exact same as the shp file.
My questions are, which method (exporting points vs. shp files) results in the correct coordinate transformation and why are they different? When exporting points I am not using any specific transformation settings, I am simply selecting the destination coordinate system. When exporting a shp file, Map 3D creates a prj file from the specified coordinate system in the drawing. Are there any other settings I need to adjust to get the same result with both processes? The only thing I can think of is I only have the coordinates out to 4 decimal places in my point file format, do I need to go out farther?
View 9 Replies
View Related
Sep 3, 2013
Is it possible to turn off or disable the coordinate or drawing conversion on import. I know I can turn it off in a dwg file but I want to completely disable it no matter what the setting is in the dwg file.
View 9 Replies
View Related
Feb 16, 2012
I am trying to convert point data from NAD83 State Plane Coordinates to UTM coordinates.
View 3 Replies
View Related
Feb 25, 2008
I'm would like to know about conversion for those Global Coordinate System . For example : (Country : Australia , region Perth) I have AHD PCG94 Coordinate system as follow [ 44650.59 E , 202428.59 N ] & [ 44673.43 E, 202414.57 N ] . How to convert those coordinate system to suit the object into my current drawing with MGA94 (Zone 50) with Civil 3D software ? Or AutoCAD MAP which partially integrate in Civil 3D might work with this ?
View 4 Replies
View Related
Jun 3, 2013
Importing a file in RGB and converting it to CMYK values are different estremamante performing the same operation in photoshop. The setting of the color profiles is the same and also varying the options Microsoft ICM CMM in color management, keep varying the pure black and gray to black colleague CYMK, does not improve anything. The conversion in coreldraw is too much dark and this is a problem. How is it possible?Here the setting of CorelDraw and Photoshop.
View 14 Replies
View Related
Sep 4, 2012
We are using iPart - iAssembly workflow with Inv-2013 and Vault Basic 2013
My question is related to released state of iparts. Currently we are generating/ releasing
all the iparts when new member is added in order to manintain the parent child version relationship
Example : say i have a ipart 41020.ipt and i have members 41020- 001 ~ 008 . I check out the parent
from Vault and add 009 member to it.
Question :
Do I have to generate all and check those in to maintain the version relationship between the child and parent inside
Vault 2013 ?
Or
Only generating 009 will maintain version relationship inside Vault 2013
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
View 4 Replies
View Related
Mar 14, 2012
how do i get an image set in one coordinate system come into a drawing in another coordinate system?
View 3 Replies
View Related
Mar 16, 2010
Is posible to disable undo for certain operations?
I want to disable undo for some for some transactions. if posible it...
View 8 Replies
View Related
Aug 9, 2012
new to 3D modelling in Autocad. the client has asked me to detail this in about 20 places on a structure.Its an SHS edge beam joining a CHS rafter.Both are at different angles.The CHS has a cleat plate, as does the edge beam.The 2 need to align and connect. The bolt hole must be 40mm off the face of the rafter.The rafter CL & edge beam CL need to coincide at a setting out point.
Where the rafter cleat plate connects to its rafter it has to be in alignment with the rafters plane.SHS edge beam will need to have its sides vertical and horizontal, so the edge beam cleat won’t be aligned with the SHS faces .
Even though I have the autocad file as an example, have tried to draw this about 100 times but cant get it right – I have been unable to contact the draftsman who did it. How to draw it and what commands to use?how to use UCS and other modelling operations.
View 1 Replies
View Related
Mar 7, 2013
I have an existing polygon, I'd want to select it and :
1.- Delete all inside it
2,. Delete all outside of it
Both actions with an option to include points of cut objects.
Civil 3D (2013)
View 9 Replies
View Related
Mar 15, 2013
I am trying to change settings in my template so that some of the Edit operations are turned OFF by default in newly created surfaces. Right now all of these options are turned on for each new surface. The command settings for CreateSurface allows me to control the build options for new surfaces, but I cannot find anything for edits.
View 1 Replies
View Related
Mar 21, 2012
when I perform any operation in AutoCAD I have to move my mouse to see it complete. know what variable I'm looking to reset?
View 5 Replies
View Related
Sep 5, 2012
I have been working with autocad for approximately five months. I feel as though I have a pretty good grasp of the program's capabilities and commands, but I'm stumped. I've successfully imported a 3dm file to autocad 2012 and all of the geometry is present in autocad (it is not a 2d wireframe), but I am unable to perform boolean operations on it.
The model has also taken on a strange pale blue hugh, though the wirefram is lavender (unless I explode it and then unionize it several times over. Unfortunately this results in an issue with surface faces intersecting with one another, as well as a loss of geometry). The model cannot be converted to a surface nor a solid which means that it is not water-tight. This is not a model that I have created. I've been tasked by my employer to make several changes to it. Why (without exploding it) I cannot perform boolean operations.
View 1 Replies
View Related
Oct 4, 2012
Just installed C3D on my Dell POS Windows 7 machine (OS is up to date).
I have noticed that the functionality between using the F3 and F8 keys reverses itself when first used. If I hit F3 I turn Ortho ON/OFF. If I hit it again, I turn Osnap ON/OFF. If I do the F3 key, then do it again to get the Osnaps set how I want, then go to the F8 key to set the Ortho mode back to where it was before I hit F3, it changes my Osnap setting, and I end up chasing my tail around and around. I can use the SCREEN buttons down below my working area. but I prefer keys, finding it far easier to hit F3 without even having to look at the key board rather than put my cursor over the little square of turn Osnaps ON/OFF there.
View 2 Replies
View Related
Aug 16, 2011
I'm modeling a fireplace in AutoCAD 2012 that has 2 solids that won't slice or work with boolean operations.
I'm trying to subtract the joints out of the header and legs of the fireplace to create seperate pieces but it won't do it. Slicing the solid at the joints doesn't work either.
The 3d model is too big to upload.
View 7 Replies
View Related
May 28, 2012
I want to know how to transform OCS Coordinate of A block object to UCS or WCS Coordinate .
It's Block's OCS Coordinate not other objects.
View 7 Replies
View Related
Oct 19, 2012
Any easy way to create a macro or record a series of commands in 2007? It's my understanding that 2009 has this feature "built in".
I want to "record" a short series of commands/actions to use as a example to other novice users at my company.
It should be something that they can "run" and watch on their screen. (like trim a circle to get a arc)
I have downloaded/tried several general screen recorders but the resulting file is way too big. (20MB AVI)
I would prefer a Macro that would run right in Autocad. Maybe a third party plugin is available?
I am not looking to create a traditional Macro to use as a time saving device.
View 1 Replies
View Related
May 17, 2012
I haven't had Photoshop Extended before CS6, so I've been experimenting with doing some simple 3D stuff, such as turning text into 3D shapes and trying to match it to a photographic background.
What I'm doing seems quite simple, and it seems to be working, but there's one glitch: A few things seem to take a really long time. At worst, Photoshop goes completely unresponsive for about 40 seconds.
A good example is this: I have a photo I've opened in RGB/16 mode at 4096 x 6144 pixels, and I create a new Text layer over the photo with one word in it: STOP
I click the 3D button in the Options area for the Text Tool, and wait a full 40+ seconds before seeing the pop-up that asks whether I want to switch to the 3D workspace.
I assume a 40 second delay isn't normal. It's certainly not acceptable.
Once in the 3D editing realm, I can do most things with relative ease, such as moving the 3D mesh around, rotating it, changing lighting, etc. The update time for any of those operations to show is maybe 1/2 second or so to show on the screen. Some things are a little faster. Even rendering it into a pretty clean state is fairly quick - just 10 seconds or so.
I've tested this in both Photoshop CS6 32 bit and 64 bit, and the performance seems about the same, as does the appearance of the long delay.
Other observations:
I also see the long delay if I click on a history step to go back or forward in the history. If I work on an 8 bits/channel image the 40 seconds is reduced to about 2 seconds. I have a decent 8 core machine, with (by today's standards) a modest graphics card: ATI Radeon HD 5670 with 1 GB DDR5. I'm on the ATI Catalyst 12.2 drivers because the 12.4 (latest) set has other problems. But when I did try the 3D stuff with 12.4 the delay was the same.
Example: Going from this screen to the one below takes 40 seconds.
...40 seconds later...
Ultimately tweaking it to look decent seems doable - no crashes or glitches...
Not knowing what to expect, or what I should expect to not try to do, what I'm doing seems pretty simple. Am I trying something I shouldn't? Is it just a given that to do 3D one is supposed to work on 8 bits/channel data?
View 14 Replies
View Related
Jan 12, 2013
I have a large image (21.6 x 14.4in, 51.3MB, and 240ppi) that I need to reduce to approx. 7 x 5in, under 30MB, and 300ppi. First, I resampled the image down to 7 x 4.667in, 5.38MB, and 240ppi. Later, after I realized that I forgot to change the resolution, I resampled the image up by changing the resolution to 300ppi. I was left with a final image that had the following characteristics: 7 x 4.667in / 8.41MB / 300ppi. Since the file size is larger, I'm assuming that Photoshop did a bit of guesswork in order to add information back into the file.
If I would have changed the resolution from 240ppi to 300ppi at the same time that I resampled the image down to 7 x 4.667in, would I have gotten a better image? In other words, should I have done all of the adjustments at the same time?
View 12 Replies
View Related
Apr 17, 2012
it's possible to see a status of savon operations in CorelDraw X6? I've read that the progress bar has changed to a small icon in the statusbar in X5, but in my recently installed X6 there's no such thing. I always have to guess whether Corel is done saving or not. This is also relevant for exporting to PDF.
forcing the measuring tool to measure only horizontally/vertically. The automatic function does not always do the trick. I have a feeling that the improvements of the measuring tool has actually made it less usable. The centering of the values used to work better in X4 and I still haven't managed to change the default color of the measurement lines and text
View 15 Replies
View Related
Nov 19, 2013
Lightroom 4 is saying "Some import operations could not be performed" then says "following images could not be copied" when I try to import any photos.
View 1 Replies
View Related
Nov 8, 2012
I have imported images from a brand new My Book hard drive, completed my edits in LR, but when I attempt to export to a subfolder located in the original folder, I repeatedly get the error message: "Some export operations were not performed." None of the images are exported. I was able to export this way to my desired location at least once before, but I'm not sure if a setting got changed or what the problem is. It does however, let me export to other locations such as the Desktop.
View 6 Replies
View Related
May 27, 2013
I have been using lightroom for a year and now suddenly I cannot import pictures, I get the message "some import operations were not performed, could not copy a file to the requested location" I have tried both Raw and Jpegs and have installed the latest updates 4.4.
View 2 Replies
View Related
Feb 10, 2009
My copy / paste operations take several seconds. I'm copying very simple objects, lines, rectangles, etc. but regardless of the size of the object, a copy/paste operation takes 3-5 seconds.
View 14 Replies
View Related
Jul 28, 2011
app name, but is there any way of using (calling) operations from inside my C# code?What I'm saying is that, there is a SDK through Paint.NET so I can have simple Image Editing from my custom application?
If not, is there a way to call Paint.NET trough my code, make some editing and then closing Paint.NET continue handling the iage from my C# app?If this is not suitable for my needs, any simple Image editing tool so I can use through my C# application?
View 2 Replies
View Related
Apr 19, 2011
I created a cone where I wanted to cut some cylindrical hole in it so I created the cylinders and did a boolean subtraction of the cylinders from the cone.
I got the holes cut out, but the resulting object appears as though it's hollow. Is this something do do with my display or is there a setting I'm missing to create objects as hollow/solid?
View 3 Replies
View Related
Apr 18, 2013
I have begun experimenting with bump-mapping procedures, and I decided to create a mask which would create the effect of a three-dimensional rectangular pyramid with a flat top. So far I have only created raised bump effects with the Gaussian Blur filter, but this tool apparently has it's limits in that it won't raise any shape by more than a quarter inch or so on the screen - after a solid black rectangle is blurred beyond 30 or so it loses it's impact on the colored background.
So I thought that maybe I could use the Blend tool, which can produce a longer gradient of white on black for a more gradual and longer bumping. Problem is that I only seem to have one layer of selection available, and I want that radial grade set for angles to operate on the area outside of what would be the flat area atop my pyramid, and I cannot get it to blend anywhere other than within my selected area. I sort of need to make Blend respond like the Bucket Fill tool to a defined area, but it seems that this would require a secondary selection border (sort of like making Blend act on a broad ring, but a rectangular one. ). I thought of simply placing a layer for the pyramid top over a rectangle with the Blend effect, but I think the gradient should begin outside of the top rectangle, not under its center. Also, I would need to merge these two layers (probably as another image unless GIMP allows the merging of cherry-picked layers). Anyway, what would be your procedure for producing this effect (any that works and produces a long, even grade from outside a flat area to the ground below)?
The last idea I mentioned (which I doubted would be satisfying anyway) would require me to merge the two layers, one for the flat pyramid top and another for the larger surrounding area which would set up the effect for grading to the ground below. It would be no biggie to do this, but here I discovered a particularly awful GIMP bug when I tried opening another image while using Radial. I have been working with GIMP for a couple of years as a practical tool for plotting project map locations with a few symbols which I've created using the same, but nothing requiring what I'm trying to do now. I have often had multiple images open, with one box listing my layers, and I have up until now been able to rely on it to report what layers I had to work with for the image I am currently working in. Now it's getting really crazy. I wanted to test the results of bumping white on black in different shapes to colored backgrounds, using different radial effects or different blurring effects, so I started with newly created images which I would compare. Working in the new images the Layers box displayed the new layers which I had created for each new image. For example, I bump-mapped a mask for a cone on a solid blue background, removed the layer visibility for the mask so that I could view the results. What I saw was NOT the effects of the mask on my blue background but the bump background showing what I had done with a rectangle mask in the image I was previously working on! The Layers box did not change, so no I could not have switched windows by accident. If the other window image window was still present (further unhappy experimentation revealed that it didn't have to be from the point after the new image window was spawned), it did not contain the cone effects nor any layers which I had just created. I have experienced this both on my work machine (Windows XP) and my home laptop (Linux).
View 2 Replies
View Related
Jul 14, 2011
Add keyboard shortcuts (or at least the option to define them) for all the layer commands. When I say, "all the layer commands", I mean a keyboard shortcut to do anything you can do with the mouse in the Layers window.
Specifically:
Move Layer Up / Down,
Toggle Layer Visibility,
Select Next / Previous Layer (or some set of commands to navigate layers.)
Select Next / Previous Visible Layer could be nice too.
This thread from 2006 asked for similar features, but no thread necromancy.
Implement these shortcuts. Having to grab the mouse to do simple layer operations feels awkward and breaks my flow.
View 3 Replies
View Related
Apr 16, 2013
I am suddenly having problems importing photos with Lightroom. I get an error message "Some import operations were not performed. The following files were not imported because they could not be read." Doesn't matter what camera I am using. I can open, convert and import the photos with Bridge. I have the Destination dropdown menu set to "All folders." I am using a Mac.
View 4 Replies
View Related
Dec 20, 2011
Im having issues using the mirror function in the "move tool".I select mirror geometry with these options : -x, merge with original, and merge vertices.
This copies my model and allows me to adjust both sides of the model by selecting a single vertex on either side.
"Is there a way I can set Maya to also mirror my cut poly and smoother operations?" As it stands now, Only the vertex's that existed when i mirror geometry are visable on both halves.
Also my center vertices are not attached to each other. So when i try to apply smoothing to the entire model it smooths right through the center of the head, basically creating two halves. Both halves are registering as the same poly.
View 1 Replies
View Related