AutoCAD Civil 3D :: 2013 Function Key Operations Switched
Oct 4, 2012
Just installed C3D on my Dell POS Windows 7 machine (OS is up to date).
I have noticed that the functionality between using the F3 and F8 keys reverses itself when first used. If I hit F3 I turn Ortho ON/OFF. If I hit it again, I turn Osnap ON/OFF. If I do the F3 key, then do it again to get the Osnaps set how I want, then go to the F8 key to set the Ortho mode back to where it was before I hit F3, it changes my Osnap setting, and I end up chasing my tail around and around. I can use the SCREEN buttons down below my working area. but I prefer keys, finding it far easier to hit F3 without even having to look at the key board rather than put my cursor over the little square of turn Osnaps ON/OFF there.
View 2 Replies
ADVERTISEMENT
Apr 12, 2012
I typically use the function keys to toggle osnap, polar, orthomode etc. on & off. Now what happens is that when I use any function key it changes the setting for the previous F-key press. It does this once, then reverts to normal behaviour. For example:
F3 Osnap On
F3 Osnap Off
F3 Osnap On
F10 Osnap Off
F10 Polar On
F10 Polar Off
F8 Polar On
F8 Ortho On
View 9 Replies
View Related
Mar 7, 2013
I have an existing polygon, I'd want to select it and :
1.- Delete all inside it
2,. Delete all outside of it
Both actions with an option to include points of cut objects.
Civil 3D (2013)
View 9 Replies
View Related
Mar 15, 2013
I am trying to change settings in my template so that some of the Edit operations are turned OFF by default in newly created surfaces. Right now all of these options are turned on for each new surface. The command settings for CreateSurface allows me to control the build options for new surfaces, but I cannot find anything for edits.
View 1 Replies
View Related
Jan 31, 2013
I am having on going issues with the DYNMODE function in AutoCAD 2013. I know to turn off completely set to 0, but it keeps frequently turning itself back on and setting itself to -1?!
Not a huge issue I know, but I do not like this command at all. How I can turn it off completely?
View 6 Replies
View Related
Sep 27, 2012
I am creating a drawing template that everyone in my office will use, stored on a shared location. I want the label "Drawn by ...." in the title block to be filled automatically with the drafter's name who created the drawing. It would be easy to just add the field "Author" or "LastSavedBy", but my situation is more complex. Our workstations are identified by a code that consists of first two letters of given and last name, for example John Smith's computer is named JOSM. So if I use "Author" field, then I would get "Drawn By JOSM", but I want to get "Drawn by John Smith".
I would like to some how create a field that contains function:
IF author=JOSM, value=John Smith
IF author=MAST, value=Mary Stuart
Is it possible to create such functionality? I found out something about Expressions and Diesel Expressions, but didn't understand much.
View 7 Replies
View Related
Nov 11, 2013
how to use Dynamic Input in and keeping it switched on.
I just wondered which version of CAD it first came from and brief history of how it changed...?
View 9 Replies
View Related
Jan 11, 2012
I have been working on a drawing for a client in the Metric template, everything displayed in metric, measures in metric, etc. Then this morning when I opened the file, the measurements have switched to imperial. The profile is still the metric one, and when I enter a value for a line length it is clearly using metric because it goes where I expect it to go, however the numbers displayed onscreen are in imperial. Is there an easy way to get this to switch back to displaying in Imperial?
View 1 Replies
View Related
Aug 23, 2011
Is there an way that I can get an new layer that I create to be frozen in all existing viewports on my drawing. I know you can freeze an newly created layer for all new viewports but that does not solve the fact that the new layer will show on all existing viewports.
View 5 Replies
View Related
Jul 10, 2013
I want to insert a word document with several pages in autocad by the OLE OBJECT function. The problem is the insert only the first page. How to follow the other pages?
View 9 Replies
View Related
Jan 10, 2013
Error message read:
Microsoft C++ Runtime Library
Runtime error!
ProgramC:Programfilesautodeskinventor213ininventor.exe
R6025
Pure virtual function call
Clicking okay then shut downs Inventor loosing any work not saved.
View 3 Replies
View Related
Feb 8, 2013
I am trying to use the "Export to pdf" function as opposed to plotting as a pdf because the "Export" function seems to make a much smaller file size. However, when I "Export to pdf" some of my layers are not showing up in the created pdf.
The pdf created when I plot to pdf looks fine. I am using the "current layout" and "current" page setup options in the "Export to pdf", so it is using the same plotting options as plot to pdf, but the "Export" function is not displaying some layers.
View 5 Replies
View Related
Apr 30, 2013
Is there a way I can add a macro or formula in a label style definition?For instance, I'd like to show the difference in elevation for the ends of a line and whether it's a cut or fill without having to do everything manually.
View 2 Replies
View Related
Mar 8, 2012
I'm looking to add a column to my point table that will subtract a fixed number from all my surface elevations. I'm working in 2011 Civil 3D. I've been researching this for the past couple of days and haven't been able to come up with anything solid yet...
View 5 Replies
View Related
Feb 19, 2013
If you have a dwg that is, say, done in west zone but some agencies want you to provide a table of west and east zone coordinates is there a transform function that will do this in a label?
I would still wan everything in the dwg to be in west zone but be able to display coordinate values in other zones.
View 4 Replies
View Related
Jul 29, 2012
I need to determine intersection points between Alignment and Parcels.
In .NET I haven't Parcel object and in COM IntersectWith function doesn't work.
View 1 Replies
View Related
Jul 24, 2013
On one of the machines here we seem to have lost the functionality of the layer filters. When a group filter is created, it shows in the list, you can add layers to the filter, but when you view the filtered layers, its all the layers. Also, when there are unreconciled layers and you navigate to this filter, it shows the entire layer list. Is there some setting that may have been changed?
Civil 3D 2013.
Windows 7 64
Intel Core i7 2.0 GHz 2.0 GHz
8 GB RAM
Nvidia GeForce GTX460M
Civil 3D 2012 SP2.1
View 6 Replies
View Related
Feb 26, 2013
I have a HP laptop on which I run AutoCAD 2012 AND Civil3D 2012 both of which for some reason do not have the function keys working as normal. Oddly enough if I attach an external keyboard, the function keys work as expected.
View 4 Replies
View Related
Jan 11, 2013
2013 C3D crashes on me a little less than once a day. Fatal errors and recoveries are also quite popular. Today, the crash took Windows 7 down with it too - a rare treat.
I have Autosave set to 20 minutes and also have the box for creating a backup file with each save checked under Options > Open and Save.
When Drawing Recovery Manager opened today, the dwg I was working on says it was last saved over 1.5 hours ago. The bak file was last saved yesterday. Usually, there's a sv$ file, but not this time. The sv$ file is typically the most up-to-date file.
Shouldn't I see a "last saved" time and date of about 30 minutes ago for my dwg? Same for the bak file? Is there some other variable that I need to set?
C3D 2013
View 8 Replies
View Related
Sep 5, 2013
I switched from a PC to a MAC and I want CS5 on my MAC NOT CS6, I have the serial number but don't know how to download it onto my computer!
View 2 Replies
View Related
Oct 25, 2013
This seems absolutly silly.
(setq p1 (getpoint))
(setq p2 (getpoint))
(setq Dist (distance p1 p2))
Why does this not work?
I'm trying to build a command to replace AutoCAD's "DI" command, to give distance and delta x, y, and z values in decimal and imperial, and keep the angles in XY plane and out of XY plane.
View 9 Replies
View Related
Jun 27, 2013
I'm trying to adjust the properties of some block objects in Mspace. When the file contains external references the function fails, when it has none it works perfectly.
Dim modelSpace As BlockTableRecord = DirectCast(M_trans.GetObject(SymbolUtilityServices.GetBlockModelSpaceId(db), OpenMode.ForRead), BlockTableRecord)
For Each id As ObjectId In modelSpace
Dim ent As Autodesk.AutoCAD.DatabaseServices.Entity = DirectCast(M_trans.GetObject(id, OpenMode.ForWrite), Autodesk.AutoCAD.DatabaseServices.Entity)
ent.Color = Color.FromColorIndex(ColorMethod.ByLayer, 256)
Using the above to get all objectid's and filter through them then using:
If TypeOf ent Is BlockReference Then
Dim br As BlockReference = DirectCast(ent, BlockReference)
Dim btr As BlockTableRecord = DirectCast(M_trans.GetObject(br.BlockTableRecord, OpenMode.ForRead), BlockTableRecord)
If Not btr.IsFromExternalReference Then
View 6 Replies
View Related
Oct 2, 2013
I have Photoshop CS5 for Windows and have switch to a MAC do I need to buy another full version of Photoshop CS5 for the MAC?
View 3 Replies
View Related
Mar 16, 2010
Is posible to disable undo for certain operations?
I want to disable undo for some for some transactions. if posible it...
View 8 Replies
View Related
Aug 9, 2012
new to 3D modelling in Autocad. the client has asked me to detail this in about 20 places on a structure.Its an SHS edge beam joining a CHS rafter.Both are at different angles.The CHS has a cleat plate, as does the edge beam.The 2 need to align and connect. The bolt hole must be 40mm off the face of the rafter.The rafter CL & edge beam CL need to coincide at a setting out point.
Where the rafter cleat plate connects to its rafter it has to be in alignment with the rafters plane.SHS edge beam will need to have its sides vertical and horizontal, so the edge beam cleat won’t be aligned with the SHS faces .
Even though I have the autocad file as an example, have tried to draw this about 100 times but cant get it right – I have been unable to contact the draftsman who did it. How to draw it and what commands to use?how to use UCS and other modelling operations.
View 1 Replies
View Related
Sep 30, 2013
I'm new to photography but taking every chance I can to learn and slowly upgrade my tools. I recently switched from a PC(CS3) to Macbook Pro(CS6). Since doing so, I am having a huge problem. My photos show up exactly as I want them to on my Mac, in and out of Photoshop, but look washed out almost everywhere else, including the web, on PC's and in print(Shutterfly). There are a few exceptions like facebook, but still not all of the photos show up the same quality as what I saw on my Mac.
I thought I did a good job of calibrating my Mac and I'm not doing anything different in PS, but I'm completely lost on what could be causing this.I can upload one of my jpg's so you can see what I'm seeing off my Mac if needed.
View 4 Replies
View Related
Mar 28, 2013
I just switched from CS3 to CS6. Can I somehow transfer the actionas I wrote or purchased in CS3 to my CS6 version?
View 4 Replies
View Related
Jul 2, 2012
Is there a match frame function for Smoke on Mac 2013 ?
View 5 Replies
View Related
Nov 13, 2012
I'm trying to be able to have a function run another function with the secondary function being passed as an argument to the first. I'm trying to create a recursive function and the recursive part works great. I just need to be able to have the recursive function run other functions to actually do stuff.
Here is something I found that should do what I need, mainly run a function from a function name in a variable.
Sub test() Dim ftnName As String Dim argument As String Dim result As String ftnName = "myFunction" argument = "cat" result = Application.Run(ftnName, argument) MsgBox resultEnd SubFunction myFunction(inString As String) As String myFunction = inString & " has " & Len(inString) & " letters."End Function
However I get the error "object required" on the "result = Application.Run(ftnName, argument)" line. So I'm guessing the Inventor VBA doesn't like this method of doing this. I'm just hoping there is a way to do this or this function will be useless or reduced to hardcoding functions which still defeats the purpose.
View 2 Replies
View Related
Mar 21, 2012
when I perform any operation in AutoCAD I have to move my mouse to see it complete. know what variable I'm looking to reset?
View 5 Replies
View Related
Sep 5, 2012
I have been working with autocad for approximately five months. I feel as though I have a pretty good grasp of the program's capabilities and commands, but I'm stumped. I've successfully imported a 3dm file to autocad 2012 and all of the geometry is present in autocad (it is not a 2d wireframe), but I am unable to perform boolean operations on it.
The model has also taken on a strange pale blue hugh, though the wirefram is lavender (unless I explode it and then unionize it several times over. Unfortunately this results in an issue with surface faces intersecting with one another, as well as a loss of geometry). The model cannot be converted to a surface nor a solid which means that it is not water-tight. This is not a model that I have created. I've been tasked by my employer to make several changes to it. Why (without exploding it) I cannot perform boolean operations.
View 1 Replies
View Related
