AutoCAD .NET :: Call GROUPTOG CadWorx Command From Addin Possible
Sep 13, 2013I need to call the GROUPTOG, which is a CadWorx command, from my .Net AddIn. Is this possible, and if so, how would one do it?
View 1 Replies
ADVERTISEMENT
AutoCAD .NET :: How To Call Command On Runtime
Sep 3, 2012How to call AutoCAD Command with .net C# on runtime?
For Example,
After opening my Drawing File thro. .net C#,
acApp.ActiveDocument.Application.ZoomExtents();
I need to use the AutoCAD command Oleopen
acApp.ActiveDocument.BeginCommand.oleopen();
Here is some error.
Normally how to use the AutoCAD commands with .net C# programming.
AutoCAD Inventor :: Create Addin - Command Manifest Error
Apr 1, 2013I would like to create an addin in VS2010 & IN2012. How I could able to do this? I have started with "simpleAddin". But, while building I could able to see the following error.
The same error for all Addins.
Error 1 The command "mt.exe -manifest "E:Program FilesAutodeskInventor 2012SDKDeveloperToolsSamplesVB.NETAddInsSimpleAddInMy ProjectSimpleAddIn.manifest" -outputresource:"E:Program FilesAutodeskInventor 2012SDKDeveloperToolsSamplesVB.NETAddInsSimpleAddIninSimpleAddIn.dll";#2
" exited with code 9009. SimpleAddIn
AutoCAD Inventor :: Add Exit Panel Finishing Command Of Addin Button?
Dec 5, 2012I am developing Addin for inventor in C#.
I have added single panel in my new ribbon tab. This panel contains a single button.
When user clicks this button then a dockable window is invoked.
Now I want to insert 'Exit' Panel(and "Finish" button in it) to kill the above dockable window.
e.g. If we switch on sketch mode then to exit from this mode the 'Finish' button is there in all tabs of ribbon
(As shown in below image)
I want to use this behaviour in my addin.
Is there any API to add this 'Exit' panel to terminate from any button command or do we need to add it ourselves?
AutoCAD .NET :: Use Command Type Call Form In Visual Studio
Nov 5, 2013I have a project related to connect autocad and visual studio(VB.Net). Example: I open my file autocad and then use command type call run visual studio.
View 3 Replies View RelatedAutoCAD .NET :: Right Mouse Click Doesn't Open Menu If Call Command From Palette-Set
Oct 23, 2013I have my own Palette Set.
On this Palette Set I have a palette withe a tree.
On the right click of the node, I call a command (it's one of our own ObjectARX commands, but the problem is the same with a build in command).
The command wants the user to select a point, with a few options. If I first select a point (left click) and then click right, everything works fine.
But If I click with the right button, before I select anything, the menu is not shown.
The code for calling the command is really easy:
Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.SendStringToExecute("_ARC
",true,false,false);
As said before... I don't call the _ARC command... but for the arc Command the right click menu is not shown also...What can I do, to get the normal behavior of the right click?
Illustrator :: Call JavaScript Through Command Prompt?
Mar 13, 2009I need to call the .js file through command prompt. And also through programming language like c++, java. This is for "illustrator cs".
View 5 Replies View RelatedAutoCAD Civil 3D :: Export Piping To Cadworx?
Oct 25, 2013The title says it all. I need to get my pipe network into Cadworx in all its 3d glory. What types of formats they accept for importing? (Civil 3D 2013)
View 1 Replies View RelatedAutoCAD 2010 :: Copy The Same Workspace To Cadworx
Nov 26, 2012We just upgraded to AutoCad 2013 and Cadworx 2013. I have set up a workspace in AutoCad, how can I copy the same workspace to Cadworx. There has to be a easy way to do this.
View 1 Replies View RelatedAutoCAD .NET :: How To Increase C# AddIn Speed
Oct 4, 2011I need to draw, using my C# AddIn, 550000 3DFace at least, and it takes 331seconds (5.5minutes). How can I speed this process?
This is the code I use
foreach (var obj in objects)
{
double[] p1 = new double[3];
double[] p2 = new double[3];
double[] p3 = new double[3];
Point3d p = obj.Geometry.PointN(1).GetPoint3d();
[code].......
AutoCAD Inventor :: Run Addin From VBA Macro
Nov 9, 2011How to call a addin from vba ? The addin is existing, source code not available :-(
My only idea is to somehow activate the button on the ribbon. Made a dump with the Print Ribbon routine from the online API help:
Tab: CDLIGHT, CDLIGHT.Part.Tab
Panel: iToolbox, CDLIGHT.iToolbox.Part.ToolBar
AutoCAD Inventor :: Getting An Addin To Load Without Registry
Sep 22, 2011how to load an addin without using the registry for Inventor 2012? Failing that, I just can't seem to get it to work.
View 1 Replies View RelatedAutoCAD Inventor :: Example Of Embedding IronPython Into A C# Addin
Dec 13, 2012Below is a link to a github repo that has a code example showing how to embed an IronPython engine inside a C# addin. It is the same as the "Simple AddIn" that comes with the SDK, only with the logic part of the addin factored out into IronPython. I could never find anything on using IronPython with Inventor so I'm posting this for any others that might be interested.
The main reason for doing this is to speed up development time. Edits related to the python code do not require the cycle of shutting down Inventor, compiling, restarting etc. More detail is in the readme. URL....
AutoCAD Inventor :: AddIn Sample Tool Bar
Oct 29, 2004I followed exactly step-by-step showing in the program. After compile the DLL register the registry, run IV, I couldn't see the AddIn SampleToolbar in the Panel bar.
View 9 Replies View RelatedAutoCAD Inventor :: Calling AddIn Function From Outside
Dec 17, 2013I would like to make an Inventor AddIn with commands (functions) that can be called from other standalone applications. I have tried to create a COM interface for my AddIn, and that works with rather small effort, but I think I have heard that it should be possible to do this without the COM interface. I would like to avoid COM if possible. if I need to do anything special in the AddIn to make the function visible and how I on client side calls the function.
View 1 Replies View RelatedAutoCAD Inventor :: Creating An Addin That Uses WPF (instead Of WinForms)
Jan 27, 2010creating an Inventor addin that uses WPF (instead of WinForms). We are trying it with Inventor 2010 and are running into problems.
View 2 Replies View RelatedAutoCAD Inventor :: Reload An Addin For Each File
Feb 13, 2013I have an addin which displays a form, then when I click a button operations are launched. The form is no modal, so I display it, select objects, apply, select objects, apply,... then close the form with another button (form.close).
All functions, but only on the first opened file : I open the file, use the addin, close the form. I open another file, the addin is always loaded, but when I click on the icon to display the form nothing happens... I have to unload the addin and reload it.
AutoCAD Inventor :: Addin Stopped Loading
Apr 13, 2012Windows 7 64bit
Inventor 2010
Visual Studio Professional 2010
I have an Addin with several pieces of functionality that I have been working on for over a year now and have had no problems with it loading. Yesterday I was working on a bug in a function and when I set a break point it was not breaking in the correct location. Possably some miss match between the source and .pdb files. I tried a clean build but still could not get the break point to be correctly aligned with my source code.
I tried to unregister and re-register the Addin with regasm but no luck. I then decided to search the registry for the name of my Addin and was supprized to find thousnads of registry entries. I then decided to clean my registry of all occurances of the Addin name. After removing all occurances of my Addin from the registry my Addin would not load.
I tried putting a message box in the first line of the Activate sub but it never executes. I made the assumption that it was a problem with the registry and changed the GUID value. When I did a rebuild I got the following error:
Error 1 The "UnregisterAssembly" task failed unexpectedly.
System.Runtime.InteropServices.COMException (0x80030002): could not be found. (Exception from HRESULT: 0x80030002 (STG_E_FILENOTFOUND))
at Microsoft.Build.Tasks.NativeMethods.UnregisterTypeLib(Guid& guid, Int16 wMajorVerNum, Int16 wMinorVerNum, Int32 lcid, SYSKIND syskind)
at Microsoft.Build.Tasks.UnregisterAssembly.Unregister(String assemblyPath, String typeLibPath)
at Microsoft.Build.Tasks.UnregisterAssembly.Execute()
at Microsoft.Build.Framework.ITask.Execute()
at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()
at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExecutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost taskHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskResult) AnthroAddIn
I ran the build again and did not get the error.This Addin is loaded on every CAD workstation in the company using an install program written with the Inno Setup Compiler. I installed the Addin using the installer and the Addin still will not load on my machine.
What is the best approch to debugging an Addin that will not load?When is it necessary to re-register your Addin using regasm?Is it possable that this problem is being caused a problem with the registry?I have read a number of posts regarding problems with Addin's not loading but have not found anything simmilar to this.
AutoCAD .NET :: Addin Does Not Load When 2013 Starts?
Jun 1, 2012I have an addin that needs to load when the autocad loads or when user type the command. It works fine with autocad 2012 but does not work with 2013. The addin dll is located in %appdata%autodeskApplicationPlugins. If I use Netload command to load the dll in 2013 and it works fine. But I need that addin to load either when user type the command or when autocad start up. I have checked the [URL]
View 9 Replies View RelatedAutoCAD Inventor :: How To Pass Variable From One Addin To Another
Aug 25, 2013I've used vb.net to write two separate addins. I was wondering if there is a way to pass a variable from one addin to another similar to the way shared variables are passed from rule to rule in iLogic.
View 2 Replies View RelatedAutoCAD Inventor :: Unable To Get Addin To Load
Aug 25, 2011I have having difficulty getting any addins to load at the moment and am totally stumped as to what the problem is. I have even created a very simple addin from the (C#) template, compiled and registered it and it still will not load up. I get the addin to appear in the Inventor Add-ins dialog ok but it will not load for some reason. I have tried generating various .Net versions 2.0, 3.0 & 3.5 all produce the same result. I have also tried to debug the add-in by getting Visual Studio to launch Inventor but it does not even appear to be loading the add-in. I have dug out some work I did months ago and tried that but it does not work either. Is there a log in Inventor?
I am using C# in Visual Studio 2008 Pro & Inventor 2011.
AutoCAD Inventor :: Create Addin With Compatibility
Sep 12, 2013I am looking for any example to create an addin compatible between versions of inventor and also compatible win between 32 and 64bit.
Today I know create all separate. Thereby generating 4 different files.
Example:
Addin2013_32x.dll
Addin2013_64x.dll
Addin2014_32x.dll
Addin2014_64x.dll
AutoCAD Inventor :: Trap Escape Key From Within AddIn?
Oct 24, 2012show me an event handler (or whatever is needed) for bailing out of an AddIn? I'm using VB.net. The end users would prefer to use the ESCAPE key for this.
View 5 Replies View RelatedAutoCAD Inventor :: Communication Error With Vault Addin
Sep 9, 2013Using Inventor 2014 and Vault Basic 2014. It was working this morning but now when Invnetor is opened it automatically logs into Vault and says it is successful but the open from vault icon is greyed out. Similarly when opening a drawing from the vault it used to automatically run and open inventor but now seems to lack the connection. Even when manually opening a drawing that is in the vault by downloading it from the browser and then opening in inventor there is no Vault tab on the browser and all Vault commands except "log out" are greyed out. I think it has something to do with the add-in as well as the Vault group.
View 2 Replies View RelatedAutoCAD Inventor :: How To Prevent DLL Addin From Reverse-engineering
Sep 24, 2012We create a greate deal of DLL add ins for Inventor using Microsoft VB.NET. The code security is very important to us. I hear certain program such " Lutz Roeder's Reflector " can reverse engineer the DLL assemblies and get the actual code from it. This would cause concern when we deploy the DLL to various users.
So, is it true that DLL from VB.NET (or C# and C++) is so vulnerable from reverse engineering? if yes, what is any practice to add security to it?
AutoCAD Inventor :: Addin Loading Multiple Times
Dec 2, 2013I have an issue where an addin loads once the first time Inventor is opened. If the addin is unloaded and reloaded via the Addins dialog and no documents are open it loads once. If the addin is reloaded while a file is open is reloads twice.
I came to the conclusion it is loading multiple times because the it seems to go through the Activation method of the addin twice. When is the Activation method called during loading an addin?
Inventor Addins
FlowTools for Inventor
ilxButton Panel (Buttons for iLogic Rules)
AutoCAD Inventor :: Debugging 2012 Addin With VS2010
Jun 20, 2011I cannot debug an addin for Inventor 2012 from Visual Studio 2010 professional on Win7 64.
I started with a new “Autodesk Inventor Addin” project
Set debug “Start external program” to inventor
Added a form and called it from StandardAddInServer.Activate sub
IF I debug from here inventor starts but form does not open. Addin not loaded.
Move *.addin file to Inventor addins
Now when running debug, form opens but breakpoints do not work. VS reports no errors on build.
AutoCAD Inventor :: Using Nullptr (instead Of NULL) Valid In Addin?
Jun 3, 2013Is using nullptr (instead of NULL) valid in an Inventor Addin?
(I'm trying to drag myself into the second decade of the 21st century)
AutoCAD Inventor :: 2012 Addin Load Sequence
May 27, 2013What the inventor addin load sequence is. I want first load addin and then load another addin what i create it.
View 1 Replies View RelatedAutoCAD Inventor :: Access Material Property From Addin?
Nov 24, 2012I can get property through API such as Density,LinearExpansion,YieldStrength...
In inventor 2013 it is added additional fields such as Description,Source etc.
is it posiible to adress to theese fields through API?
AutoCAD Inventor :: Use DXF Translator Addin To Export A Sketch?
Jun 18, 2009Is it possible to use the DXF Translator Addin to export a sketch?
I've managed to export a sketch using the DataIO mechanism, but I need to be able to export the DXF in an older file version than 2010. Is there any way to specifiy the version to export to using the DataIO mechanism?