AutoCad :: Measure Tool Not Displaying Results In 2013 Mac?
Jul 3, 2013Measure Tool Not Displaying Results In Autocad 2013 Mac
View 4 Replies
ADVERTISEMENT
AutoCAD Inventor :: Displaying Loop Measure Of A Spline / ARC / Slope
Mar 21, 2013I want continuously to display the loop measuring of a Spline/Arc/Line/Slope (or even have it as a dimension / parameter on a sketch/part) because it change in relation to the block-position that constrains to the slope.
View 3 Replies View RelatedAutoCAD 2010 :: Measuring Differences Between Measure Tool And Dimension Tool
Apr 26, 2012Im trying to show some measurements in layout view. But when i dimension between 2 points i get the number 71,84. When i use the measure tool in model view i get 1150mm which is the correct length.
Sure there is some simple reason why the two arnt coming in with the same value. Also it isnt an issue with Units as i have checked both and they are both in millimetres.
AutoCAD Inventor :: Customizing Measure Tool
Apr 28, 2006Whenever we use measure tool it will show the a dialog box with valves of x,y,z, delta X, delta Y & delta Z. I want to customize the same as per the attached image.
Customize this, dialog box will not disappear(modal) after entering into any other command so no need to remember the values of x,y....etc.
AutoCad :: Measure Area Tool Working
Sep 27, 2012Found that in certain drawings, the measure area tool will just suddenly stop working? It's very odd. It let's me pick points, but won't let me press enter to see the total.
Closing and reopening AutoCAD doesn't work. It seems to be a permanent thing to the affected drawing.
It's happened to me in a few drawings, but only in those specific ones. Other drawings are fine. I'm guessing it's a setting I've changed somehow?
I've been getting round it by creating shapes using the polyline, and then looking at the area in the properties window. It's an ok solution, but not ideal.
AutoCAD Inventor :: Use Measure Distance Tool From VBA Form
Nov 8, 2012I have a VBA form coded that we use to generate part numbers and descriptions that then populate the iProperties. We often use the part sizes in the description. I would like to be able to put a button on the form that allows users to use the "Measure Distance" tool so that they can measure the part while they are creating the description.
Any code that I could use to activate the "measure" tool while a vba form is active?
AutoCAD 2013 :: Measure Annotative Dimensions
Nov 28, 2012IN Autocad 2013, I'm trying to measure an annotative dimension. When I do it, it doesn't show the units along with the measurement.
For instance, it just shows up 24 when in fact I want it to say 24". Or if it was metric I would want the "m" to show up after the 24. How do I get the unit to appear?
AutoCAD Inventor :: Do Not Have Select Other Option In Measure Distance Tool
May 17, 2013I would like to measure the distance in assembly.
The distance is between two hole axis.
I use Measure Distance tool.
I do not have the “Select Other” option to choose axis supposedly pop up ofter the preset delay time. Seems like Application Option – General – Selection is responsible for that?
But it is checked to ON as on pic attached. My laptop machine works fine with the same settings.
AutoCAD Civil 3D :: Unable To Get Correct Measurement From Measure Tool
Oct 8, 2013The measure tool is not giving me the correct measurement. For example, I offset a line 24' and when I go to double check the distance it is off by .03. That is starting on the original line and doing a perpendicular snap to the other line. So I thought, wait a minute that can't be right, so I drew a line between the two lines and did an inquiry and it gave me 24'.
I also did a dimension which also was correct. I also measured a 97' line and it was off by 3 feet. Never had issues with previous versions of Autocad as far as measuring.
AutoCad :: Can't Get Area Measure Tool To Output Proper Figures
Sep 11, 2012I've figured some things out, but am struggling with what appears to be a very valuable tool... the area tool.
I found many references to the boundary tool, but that looks more complicated.
I have figured out how to mark the corner and press enter, but the output is for example 1.7 sq ft vs. what should be approx 35K sq ft.
I tried to change the units, but that didn't seem to make a difference.
AutoCAD Inventor :: Using Measure Tool Without Opening Part File?
Jun 19, 2012Can we use measure tool without having to open the part file?
Say directly in the viewer or in vault viewer.
C1
Inventor Professional 2013
Vault Collaboration 2013
AutoCAD 2013 :: How To Measure Angles Greater Than 180°
Jun 27, 2013How does one measure angles greater then 180°, using the angle in measuregeom. i have tried the "Specify vertex" but it always returns the smaller angle, it is not a problem when you use angular in dimangular and specify vertex!
View 6 Replies View RelatedAutoCAD 2013 :: Start Measure From Middle Of Line
Sep 3, 2012I want to start measure command from middle of line and insert blocks on specific distance and leave rest on ends of line or arc.
View 5 Replies View RelatedAutoCAD 2013 :: 2014 - Unknown Command Results In Massive Lag
Jul 4, 2013[URL] Basically, when I accidentally input a typo into the command line there is a massive lag before AutoCad comes back to life. Nearly three seconds.
This happens on our AutoCad 2014 LT installations too.
I have all the predictive/corrective command line features turned off.
I have also uninstalled 360 and online content services, prior to the problem, to no avail.
Our office internet is proxied, and there are no ports opened for any Autodesk products.
It's losing us valuable seconds / minutes / days / weeks / months, depending on how you look at it.
System information: Win7 x64 / 3DSMax Design 2014 SP3 / AutoCad 2014 SP1 Lenovo E30 ThinkStation Xeon E31225 Quadcore @3.10Ghz PNY GTX760 XLR8 2GB (332.21 Driver) 24Gb Ram Corsair 650w PSU
AutoCAD 2013 :: Mmm Is Not Possible To Measure Angle Giving Three Mouse Clicks?
Apr 26, 2013I want to use three points. Now I have to use lines, etc.....
Nobody never thought into the needed of simply use three any points.?
(I'd want to use even 3 simple mouse clicks)
Civil 3D (2013)
AutoCAD Civil 3D :: 2013 SSA Detention Pond Peak Outflow Results
Jan 2, 2013Attached is my 1st project using SSA for detention pond design.
Where is the best place to view the results for the detention pond peak outflow and maximum HGL?
Also, the program seems to separate the results per year storm...anyway to view the results for all year storms in the same report?
how do you attach the .spf file?
2013 Civil 3D
Photoshop :: Measure Tool
Jan 24, 2007is it possible to measure the distance between two lines but is it possible to set the scale (calibrate) to customize the dimensions. For example, we have pictures with a ruler in them and we need to set the scale in PS to equal the scale on the ruler.
View 6 Replies View RelatedPhotoshop :: Measure Tool CS Vs CS4
Dec 9, 2008In CS, I observed and confirmed with other users the following behavior:
1. Use Measure Tool to establish horizon
2. Image > Rotate > Arbitrary
3. Image > Adjust > Levels
At this point, Measure Tool reverts to Eyedropper Tool. For my workflow, this is lots of extra clicking. Would someone please check this in CS4 and see if the Measure Tool stays as Measure Tool?
GIMP :: Using Measure Tool In 2.8
Jul 28, 2013Software: GIMP 2.8 part of Ubuntu software (13.04 - 64 bit)
I am unable to use the measure tool. When I use it, the distances and angles keep adding to the last reading and these cumulated readings are of no use.
How to start a fresh set of measurements within the same session?
Photoshop :: Keeping The Measure Tool On Top?
Aug 31, 2006This is most likely a stupid question but it has had me stumped for a while... Every time I close an image the eyedropper tool pops back to the top. What do I have to do to keep the measure tool on top?
View 1 Replies View RelatedPhotoshop :: Using Crop Tool Results In 1x1 Image?
Oct 26, 2012when I apply cut tool (enter) the result is one pixel. Sometimes my PS4 works sometimes not.
View 6 Replies View RelatedRevit :: Measure Distance Tool 2014?
Dec 16, 2013in 3D - Section Box all measurement tools are grey indication of no use/doesn't applay/stay away/? Using 3D-SB you can have a glance insidea 3D modell and there be objects that only have a elevaton and no other properties except New Constuction (Specialty Equipment). So confirming space is a pain.
View 6 Replies View RelatedPhotoshop :: Getting Poor Results With Refine Edge Tool?
Jun 19, 2013I tried isolating the figure from the background using Refine Edge and keep getting poor results. Maybe it's my settings, I'm just not sure. But after painting over my edges, I end up with terrible results. Unfortunately, I'm getting poor results with other images as well.
View 4 Replies View RelatedPhotoshop Elements :: Blur Tool Results Seen Only In Palette Bin
Jan 16, 2011I am new at Photoshop.
I have Elements 7, Windows 7.
When working with the blur tool, I see no change to my photograph. However I do see changes on the layer thumbnail in the palatte bin. What am I missing? It worked for a previous photo, but not with a new one I opened up.
GIMP :: Measure Tool - How To Trace Angles With Measurement
Sep 25, 2011I know we all love the measure tool, but if you want to stroke with it what you are measuring in a certain angle you can't do it. At least nothing that I know of. How do you trace your angles with measurement (whether degrees or radians)?
View 2 Replies View RelatedAutoCAD 2013 :: Attribute Text Not Displaying?
Dec 27, 2012They have one file xrefed into another but the text is not showing up. It is a block and the text is an attribute - but it is exploded.
I have attached 2 images - the first one - of the original file the second - where it is xrefed into another file with the text missing.
AutoCAD 2013 :: Quick Properties Box Not Displaying?
May 14, 2012I am having trouble with getting the quick properties box to display. I have turned the feature on at the bottom taskbar, and tried Ctrl+Shift+P, and changed settings so that it displays to the top-right of the cursor, but I get nothing when I select any object. It used to work on 2012 but not now.
View 8 Replies View RelatedPhotoshop :: Image Be Saved With Annotations Of Measure Tool In Extended?
Jun 6, 2013Can the image be saved with the annotations of the measure tool in PS Extended?
View 1 Replies View RelatedAutoCAD 2013 :: Displaying Number Of Entry Block
Dec 25, 2012In block attribute manager i can see the number of instances of the selected block in the current drawing. Can I set this value in the field?
View 4 Replies View RelatedAutoCAD Civil 3D :: Alignment Labels Not Displaying 2013?
Jan 15, 2013The major and minor station alignment labels keep disappearing in my drawing. I've had some luck by removing and re-adding the labels but this has stopped working. Is this an issue that will be resolved by Service Pack 1?
View 3 Replies View RelatedAutoCAD 2013 :: Displaying File Name On Plotted Drawings
Oct 3, 2012Any way to have the file name of a drawing printed somewhere on the drawing when plotting drawings?
View 5 Replies View Related