I know we all love the measure tool, but if you want to stroke with it what you are measuring in a certain angle you can't do it. At least nothing that I know of. How do you trace your angles with measurement (whether degrees or radians)?
View 2 RepliesThe measure tool is not giving me the correct measurement. For example, I offset a line 24' and when I go to double check the distance it is off by .03. That is starting on the original line and doing a perpendicular snap to the other line. So I thought, wait a minute that can't be right, so I drew a line between the two lines and did an inquiry and it gave me 24'.
I also did a dimension which also was correct. I also measured a 97' line and it was off by 3 feet. Never had issues with previous versions of Autocad as far as measuring.
Software: GIMP 2.8 part of Ubuntu software (13.04 - 64 bit)
I am unable to use the measure tool. When I use it, the distances and angles keep adding to the last reading and these cumulated readings are of no use.
How to start a fresh set of measurements within the same session?
How does one measure angles greater then 180°, using the angle in measuregeom. i have tried the "Specify vertex" but it always returns the smaller angle, it is not a problem when you use angular in dimangular and specify vertex!
View 6 Replies View RelatedWhen I use the measure tool for the ruler an open centered cross is displayed - is there any way to make the size of the centre of the cross larger? this way i can get a more accurate measure of 2 points -
View 2 Replies View RelatedIm trying to show some measurements in layout view. But when i dimension between 2 points i get the number 71,84. When i use the measure tool in model view i get 1150mm which is the correct length.
Sure there is some simple reason why the two arnt coming in with the same value. Also it isnt an issue with Units as i have checked both and they are both in millimetres.
How does one change the measurement units?...or does one want to? What is the relationship between the measurement tool and the actual printout?
I draw a box, I measure the box and it tells me its 37.886 (what r the units?) I do a printout at 1:1 on an 8.5x11 landscape and nothing matches.....?
Where can I get a manual to reference?
I created a new unit using “Edit” and selected “Units,” then clicked on “New” and entered the info and saved the info. However, I mistyped info on the unit which created 2 units with the same name. How do I delete the incorrect unit?
View 1 Replies View RelatedI have created a custom measurement tool to measure distances (captured from sattelite imagery, and using the distance key as the guide) and it works great. However, I would like to be able to use the same tool to measure curves/radiuses. Say for instance a mountain road. I know the scale of the photo, and can measure any straight (line) angle, but can I do the same for a curve or radius using the same scale?
View 6 Replies View Relatedis it possible to measure the distance between two lines but is it possible to set the scale (calibrate) to customize the dimensions. For example, we have pictures with a ruler in them and we need to set the scale in PS to equal the scale on the ruler.
View 6 Replies View RelatedIn CS, I observed and confirmed with other users the following behavior:
1. Use Measure Tool to establish horizon
2. Image > Rotate > Arbitrary
3. Image > Adjust > Levels
At this point, Measure Tool reverts to Eyedropper Tool. For my workflow, this is lots of extra clicking. Would someone please check this in CS4 and see if the Measure Tool stays as Measure Tool?
This is most likely a stupid question but it has had me stumped for a while... Every time I close an image the eyedropper tool pops back to the top. What do I have to do to keep the measure tool on top?
View 1 Replies View RelatedI am trying to trace MRI scans with the Adobe Illustrator trace tool. I have been experimenting with the presnts in order to get the image I want and I have an example posted on this blog: [URL] .....
My goal is to produce easier to follow drawings for audiences who are not used to seeing MRI scans and at the same time avoid any copyright violations by using somebody else's images.
As you can see it does a fair job of outlining the brain but misses a lot of gray details in the center of the image.
How to trace these details? I used to be able to do this by hand, so I think that it is probably possible.
I am using AI CS4 and Win 7. For those who have used it is the trace tool in CS6 better?
Whenever we use measure tool it will show the a dialog box with valves of x,y,z, delta X, delta Y & delta Z. I want to customize the same as per the attached image.
Customize this, dialog box will not disappear(modal) after entering into any other command so no need to remember the values of x,y....etc.
in 3D - Section Box all measurement tools are grey indication of no use/doesn't applay/stay away/? Using 3D-SB you can have a glance insidea 3D modell and there be objects that only have a elevaton and no other properties except New Constuction (Specialty Equipment). So confirming space is a pain.
View 6 Replies View RelatedFound that in certain drawings, the measure area tool will just suddenly stop working? It's very odd. It let's me pick points, but won't let me press enter to see the total.
Closing and reopening AutoCAD doesn't work. It seems to be a permanent thing to the affected drawing.
It's happened to me in a few drawings, but only in those specific ones. Other drawings are fine. I'm guessing it's a setting I've changed somehow?
I've been getting round it by creating shapes using the polyline, and then looking at the area in the properties window. It's an ok solution, but not ideal.
I have a VBA form coded that we use to generate part numbers and descriptions that then populate the iProperties. We often use the part sizes in the description. I would like to be able to put a button on the form that allows users to use the "Measure Distance" tool so that they can measure the part while they are creating the description.
Any code that I could use to activate the "measure" tool while a vba form is active?
Measure Tool Not Displaying Results In Autocad 2013 Mac
View 4 Replies View RelatedCan the image be saved with the annotations of the measure tool in PS Extended?
View 1 Replies View RelatedI would like to measure the distance in assembly.
The distance is between two hole axis.
I use Measure Distance tool.
I do not have the “Select Other” option to choose axis supposedly pop up ofter the preset delay time. Seems like Application Option – General – Selection is responsible for that?
But it is checked to ON as on pic attached. My laptop machine works fine with the same settings.
I've figured some things out, but am struggling with what appears to be a very valuable tool... the area tool.
I found many references to the boundary tool, but that looks more complicated.
I have figured out how to mark the corner and press enter, but the output is for example 1.7 sq ft vs. what should be approx 35K sq ft.
I tried to change the units, but that didn't seem to make a difference.
Can we use measure tool without having to open the part file?
Say directly in the viewer or in vault viewer.
C1
Inventor Professional 2013
Vault Collaboration 2013
i cannot find auto trace tool in the trial version,i looked for it on the right side of the blend option,but its not there
View 9 Replies View RelatedI use it to measure angles of micrographs (images taken with a microscope) --- the angle measure tool is great, and easy to use! I would like to be able to save the angle measure "rulers" into the image, for documentation purposes. Is there a way to incorporate the angle "ruler" in a layer or overlay in the image so that I can save a new file with the ruler "burned in" (for lack of a better term).
I will also be adding the text of the resulting angle measurement --- it would be cool if the result of the angle measure could be automatically added as text to the image (preferably in a different layer than the original image). I can type it the result with the text tool.
how to use Live Trace in Illustrator but now instead of the Tracing Options window having a button that says "Trace" it's now showing a button that says "Set to Default." I'm sure something isn't selected right or something similar, but I can't figure it out. why "Trace" is no longer an option?
View 2 Replies View RelatedI'm playing a racing and I'd like to screenshot my cars, or some of them, and cut them out to a transparent background.
So I want to be able to take the car out of the picture, with a tracer pen (if possible). I used to know how to do this awhile back but I done and forgot how after stopping making signatures and stuff.
Image trace shifts artwork once the trace is finished. Have to nudge art back into place each time.
View 6 Replies View RelatedI'm loving CS6 Illustrator, except for one thing. Image Trace. Here, Adobe seem to have taken away the two most usefull settings from Live Trace, and replaced all the presets with ones that are pretty much unusable. I almost always used either 'Comic Art' or 'Lettering' to trace hand-drawn images, but they're both gone. None of the new settings are good enough, even if I make a custom one. The main issue is that the sliders in Image Trace are for completely different things to those in Live Trace, so it's difficult to translate one set of settings into the other.
With Image Trace, I cannot get the same results as with Live Trace, and so far, have found myself having to have Illustrator CS5 open at the same time as CS6, just so I can get workable traces.
I don't know if it's possible, but is there any way to import the presets from Live Trace, or even the full tool, into CS6, to replace the new Image Trace presets?how to make the equivelant of Comic Art in Image Trace's new settings?This is a close up of a file I was trying to trace, showing the major difference in quality between the two CS versions.
Left: CS5 - Comic Art setting.
Right: CS6 - This is a custom setting, but is the closest I have come to Comic Art thus far.
As you can see, the definition of Image Trace is far lower in quality than Live Trace, giving me one large connected blob of colour rather than the distictly separate lines produced in Live Trace.
I just started using CS6, jumping from CS3. A major tool I use is Live Trace, and I have custom settings for that. I cannot find a way to make Image Trace behave the way Live Trace did for black and white line drawings. The results I get in CS6 are far inferior to those I got in CS3 in terms of retaining the look of the original raster image. Otherwise, I will have to leave CS3 installed just to do my Live Trace.
Here is a sample of what I mean. You can see the quality degredation in CS6 compared to CS3. (And it's much more obvious when it's full size and full resolution.)
My settings used in Live Trace (CS3) were:
The settings I tried in CS6 that gave the above result were:
I am fairly new to Illustrator. I am trying to trace an image using the brush tool. I can get some lines in and for some reason the brush tool begins to revert to fill none effectively just making invisible lines. I have the parent image on its separate layer and the line art on another layer. Layers are unlocked. When I use the brush it will look as if it is deleting/erasing what is shown on both layers. The brush tool is effectively erasing what is there already instead of drawing.
I tried searching for a couple days now and the best I could find is this: [URL] ...
I tried everything mentioned in the thread and it still isn't working. In fact I think the OP in that thread never really solved his issue too. I can barely even get my line art down.
When I try to trace a template with the pen tool parts of the template disappears with each new anchor point. How to keep this from happening?
View 3 Replies View Related