I created a new unit using “Edit” and selected “Units,” then clicked on “New” and entered the info and saved the info. However, I mistyped info on the unit which created 2 units with the same name. How do I delete the incorrect unit?
View 1 RepliesI can not get the ruler to display - and yes I know how to turn it on and to change the unit of measurement. Also the options for setting the diameter of the clone stamp is no where to be found. BTW, I'm using the expert mode and even tried the other modes, still no dice. There does seem to be some change in the margin border when I attempt to display the ruler (just gets slightly wider, but no ruler). Perhaps there is a a button some where to make all the adjustments visible like I am used to seeing in previous versions.
View 6 Replies View RelatedHow could i know if i'm using meters, and not inches, feet or millimeters? and how to set autocad to use meters not inches, feet, nor millimeters.
View 9 Replies View RelatedI know we all love the measure tool, but if you want to stroke with it what you are measuring in a certain angle you can't do it. At least nothing that I know of. How do you trace your angles with measurement (whether degrees or radians)?
View 2 Replies View RelatedI am trying to find out how to completely,that is, FULLY delete am image in Gimp....even to the point that the name does not show up in File/Open Recently.
View 1 Replies View RelatedI 'open as layers' an image (a .bmp if that matters), use the rectangle-select tool to outline a portion of the image, then press Delete (or click Edit/Clear), expecting that my selection will be erased, but instead it deletes the entire picture.
I've been at this for an hour. "They" say that doing the same thing again and again and expecting a different result is evidence of insanity...
How to delete a brush I made ( Watermark.png) that I used the 'paste as' new brush command to install. I have tried deleting it from my Brushes dialogue without success, & it doesn't show up in my brushes folder ... so how do I delete it ? .
View 2 Replies View RelatedI can't find a way in Gimp 2.4 to delete all invisible layers, is there one?
When working with a slightly complex file I use to have multiple layers which I show, hide and duplicate as needed. After a while my layers dialog gets cluttered and I need to delete layers I don't need anymore, most of these layers are invisible and going one by one to delete takes much time, an option to remove all invisible layers would be great.
There's an option to delete invisible layers on "Image > Merge Visible Layers" but this, as the name says, merges all other layers.
I want to delete a layer in a banner. I am a novice with gimp and looked to a tutorial to find out how. It says:
Go to File > Dialogs > Choose Layers or just hit CTRL-L. This opens up the Layers Dialog (or window).
The problem is there is no dialogue option in file. I do not know what to do.
file:///C:/Users/michael/Desktop/gimp.htm
I'm working on a very small scale, and need to find a way to make an image which consists of 4 colors, randomly spread around the 16x16 pixels.
I have not been abel to get the desired affect with any of the noise filters, so I was thinking I could make 4 layers, one with each color, delete the parts I don't want and just merge them down.
Now, with such a small scale, I could do the work by hand, but I have to repeat the process at least a dozen times, and I want it to look truly random.
How do you delete saved image files from Gimp once you are finished with them ?
My 'Document History' is so cluttered with unwanted files they are now appearing on my Desktop ! I have used edit - clear ... but the files remain as a blank transparency & I cannot find a way to remove them entirely.
When I right click downloaded brushes the options Duplicate Brush and Delete brush are greyed out and when I click Edit Brush I can't change anything. That is a problem because from the more than two hundred brushes I have right now I only need/like about 20 or 30. Those options are available only in brushes I created myself, by the way.
View 11 Replies View RelatedI edited some photos today using GIMP 2.8.
I am now unable to delete the edited photos, rename the edited photos, or move the edited photos to another folder. Basically, they are stuck in their spot. I'm not even able to pull up the "Properties" selection from right-clicking the edited photo.
I tried to open them using IrfanView, but when I go to delete the photo using that program, it makes it not respond.
I can open the photo up in Paint, save it as a different format, and delete it - but the original edited photo is still there.
How can I move and delete edited photos? I've never ran into this problem in all the years I've been using GIMP.
I would like to modify a text on a picture for a friend. Let me explain : here is the picture I'd like to modify :
[URL]....
I'd like to delete the facebook thing and replace it. But I don't know how to do it. I thought I would select and delete but the result is terrible because the color is not uniform, take a look at this :
[URL]....
The top of the sheet is okay, the rest is not...
Second question. How to make a text looks "real".
I have thought : let's take a picture of a someone holding a blank paper and add a message.
[URL].....
It's not bad but it doesn't look as if I had stamped the message. So I was wondering is there any tool to do so ? Or to make the text fit the picture. As you can see, the quality is not perfect, the first thing coming in my mind is "pixels". It seems we have two different kind of "pixelisation" (I don't know if it's the correct term for what I want to say) : an "old" picture with a new text...I tried the pixel filter it's not working fine.
I want to delete the default brushes in Gimp, like the famous green pepper and others that I find not useful to me. I know how to do this but is there's a reason why the pre-installed brushes cannot be deleted with the brush editor?
View 3 Replies View Relatedfor question A : how to chain or unchain, lets say 8 frames in 1 shot ?
for question B : how to delete frame, lets say 5 frames in 1 shot ? Any short cut key?
I have followed this tutorial [URL] To delete the background which is white in this case. The area was selected with fuzzy tools, then transparency added. Deleted background. All worked well. Problem is, saving as a jpg will not include a white background, which I DO not want.
I want to import this image into Inkscape, and have the background on my business card to show up to the edge of the jpg image I have on the card.
So what can I save this image that had its background deleted into another format that does NOT add white as a background and imported into Inkscape?
Is it possible to delete/clear contents outside visible work path easy way?
Sometimes when you create stuff, move stuff, import and cut images something is left outside visible work path. For example, in Adobe Photoshop it could be easily deleted with select tool + delete. Even non visible leftovers that is outside work area.
I started using Gimp yesterday and sure some things are SO irritating after long use of other image editing softwares.. I just can not figure out how people get used to it (Gimp).
Long way would be to move layer contents so you could see those "leftovers" and then it allows you to select them and delete. Then move back image where it was previously. But even after deleting those lefovers why the hell GIMP would select layer size according to "what it was at first" not what's acual dimensions of non transparent area?
I design website layout with the newest version of photoshop, retina support.
When I open a 960px width canvas, it looks like 480px width, if I want it looks like a "normal" size, I have to change it to 1920px width. when I begin coding, EVERY dimension need to divided by 2 - It's simple but not cool.
Photoshop has pixels, inches, cm, mm, points, picas, columns, if I can put a new unit "double pixel" into photoshop.
I have a file that is in the unit of m. I am wondering how can I convert it to mm unit? For example, for a length of 1.4m I want it to be displayed as 1400 instead of 1.4.
View 1 Replies View RelatedThis is not a 2012 problem it happened to me with other 3ds max version, well my problem is im working with unit scale in meters, so when it comes with small geometry it disappear when i zoom in which made dealing with small details are hard to model and to see.
View 5 Replies View RelatedI am using the 3ds Max Design 2014 tutorials. I am working in the Civil View section of the tutorials. My problem is that in the SOS dialog, when I insert the measurements in the tutorial, I believe they are supposed to be in meters. Such as the measurements I am instructed to enter are like 2.0, 0.45 and so on. But when I enter the numbers, they display in foot and inches. I went to CIVIL VIEW "PREFERENCES", but here is no way to change the settings.
View 2 Replies View RelatedIn some of the Photoshop "Extended" versions, there was a function in which one could apply a known measurment to an image and then determine other dimensions in the image. For example, if one were designing a sign for a building and shot a picture of the building with a known 5' doorway, one could use the measure tool (or whatever it was called in that function) to tell Photoshop that the doorway was 5'-0" wide.
From there, after you laid in the sign design, and used the measure tool on the sign image, Photoshop would tell you the dimensions of the sign based on the scale you set with the doorway. Now for the big question: One, does that function still exist, and two, if so, where do you find it?
I'm recording measurements (gray value) in a selection, using the "record measurement" in the measurement log panel. I need to repeat this over thousands of images. I've written an action that opens the images one by one (batch process), records the measurement and closes them.
However, after exactly 700 measurements, Photoshop stops and says that it cannot record this measurement. I've tried this with CS4 and CS5 (extended) as well, and I get the same result. why Photoshop measurement log has this "700 entry" limit?
when i make a new image how many pixels/inch must i use for the measurments to be exact?
The reason I ask is because i have to crop a picture to an exact size for use as a pasport picture.
the picture is 1.7 in. X 2.13 in. but when i place it in a new 4X6 it takes up nearly the whole document
Iâm designing a DVD case cover. Iâm printing it with my home printer, when Iâm measuring it on the paper it larger than it specified in Photoshop. I have tried to check and uncheck the âScale to Fit Imageâ� but its still not accurate. My image is : 297x210 Res : 300ppi Why the measurement on the paper and the document size in Photoshop are not the same? something to do with the printer driver? Any help?
View 6 Replies View RelatedtmpApp.UnitsOfMeasure.GetStringFromType(Inventor.UnitsTypeEnum.kCentimeterLengthUnits)
returns "zentimeter"
Is there also a function which returns the unit sign "cm" ?
I am trying to merge a unit of furniture into my scene. The unit of furniture is a MAX file.
When the MAX is imported the object is read only. Why is this? Surely only XREFs and File Linked entities should be read only?
I want to modify the imported 'Merged' MAX entity.
System information: Win7 x64 / 3DSMax Design 2014 SP3 / AutoCad 2014 SP1 Lenovo E30 ThinkStation Xeon E31225 Quadcore @3.10Ghz PNY GTX760 XLR8 2GB (334.89 Driver) 24Gb Ram Corsair 650w PSU
The properties unit of all my Revit's door, wall, windows..etc is millimeter. How do I change it back to inch and feet?It was also strange that when I opened some files, the unit became inch and feet. The units of doors, windows, etc became inch and feet.
However, when I create a new project, the unit becomes millimeter again.
I'm trying to model a parametric simple unit in Revit. So, I decided t use the generic family template. I want to model a rectangular unit with exterior wooden wall and interior steel frame. I have three problems
1- I have imported structural column profile into the family, but my problem is that I cannot align the section to two reference line. For example, I want to align the top of the column to the top exterior wall, and align the left side of the column to the left exterior wall; but I can just assign of these sides.
2- I've imported structural framing family in my generic model, but I cannot assign a parameter to the length of the beam, and the length is constant, and I can change the length just in 3D view. Do you know how to assign a parameter to the length?
3-I couldn't use the predefined walls it the family, so, I used extrusion. But I couldn't use the Revit windows family on the extrusion walls. Is there any way to use the predefined wall systems in Revit to be able to use the windows families?
Here is the picture of my model:
I'm trying to add a new unit's type for a specific drawing.
Is there any way to add one with its corresponding calculation parameter?
Under the "Style and Standard Editor" Panel i cannot modify it.
The End result is to display a " Symbol after the first Units instead of the in unit (see enclose picture that i manipulated to display the end desired result).