I design website layout with the newest version of photoshop, retina support.
When I open a 960px width canvas, it looks like 480px width, if I want it looks like a "normal" size, I have to change it to 1920px width. when I begin coding, EVERY dimension need to divided by 2 - It's simple but not cool.
Photoshop has pixels, inches, cm, mm, points, picas, columns, if I can put a new unit "double pixel" into photoshop.
Currently running Design Standard Suite CS5, but want to upgrade just PS6!
Because of Adobe rules I am unable to do so, must upgrade complete suite! So, I thought maybe I would re-install PS4 (a stand alone unit) and upgrade to 6 from this. Question, do I need to uninstall PS5 first before re-installing PS4? And secondly can I continue to use the other products within CS5 with PS6? I think it is totally unfair of Adobe to penalize loyal customers this way. My circumstances have changed and I don't have the need to use the complete suite as much as I did in the past.
I can not get the ruler to display - and yes I know how to turn it on and to change the unit of measurement. Also the options for setting the diameter of the clone stamp is no where to be found. BTW, I'm using the expert mode and even tried the other modes, still no dice. There does seem to be some change in the margin border when I attempt to display the ruler (just gets slightly wider, but no ruler). Perhaps there is a a button some where to make all the adjustments visible like I am used to seeing in previous versions.
View 6 Replies View RelatedHow do I resize a photo using pixels as a unit in Elements 12? I do not wish to print it, just to resize to the size it will be viewed online.I have "upgraded" from Elements 8 where this was no problem but I cannot find the option in Elements 12.
View 1 Replies View RelatedHow do I set inches as the default unit for image resize, in Elements 12?
View 2 Replies View RelatedI have a file that is in the unit of m. I am wondering how can I convert it to mm unit? For example, for a length of 1.4m I want it to be displayed as 1400 instead of 1.4.
View 1 Replies View RelatedThis is not a 2012 problem it happened to me with other 3ds max version, well my problem is im working with unit scale in meters, so when it comes with small geometry it disappear when i zoom in which made dealing with small details are hard to model and to see.
View 5 Replies View RelatedI am using the 3ds Max Design 2014 tutorials. I am working in the Civil View section of the tutorials. My problem is that in the SOS dialog, when I insert the measurements in the tutorial, I believe they are supposed to be in meters. Such as the measurements I am instructed to enter are like 2.0, 0.45 and so on. But when I enter the numbers, they display in foot and inches. I went to CIVIL VIEW "PREFERENCES", but here is no way to change the settings.
View 2 Replies View RelatedtmpApp.UnitsOfMeasure.GetStringFromType(Inventor.UnitsTypeEnum.kCentimeterLengthUnits)
returns "zentimeter"
Is there also a function which returns the unit sign "cm" ?
I am trying to merge a unit of furniture into my scene. The unit of furniture is a MAX file.
When the MAX is imported the object is read only. Why is this? Surely only XREFs and File Linked entities should be read only?
I want to modify the imported 'Merged' MAX entity.
System information: Win7 x64 / 3DSMax Design 2014 SP3 / AutoCad 2014 SP1 Lenovo E30 ThinkStation Xeon E31225 Quadcore @3.10Ghz PNY GTX760 XLR8 2GB (334.89 Driver) 24Gb Ram Corsair 650w PSU
The properties unit of all my Revit's door, wall, windows..etc is millimeter. How do I change it back to inch and feet?It was also strange that when I opened some files, the unit became inch and feet. The units of doors, windows, etc became inch and feet.
However, when I create a new project, the unit becomes millimeter again.
I'm trying to model a parametric simple unit in Revit. So, I decided t use the generic family template. I want to model a rectangular unit with exterior wooden wall and interior steel frame. I have three problems
1- I have imported structural column profile into the family, but my problem is that I cannot align the section to two reference line. For example, I want to align the top of the column to the top exterior wall, and align the left side of the column to the left exterior wall; but I can just assign of these sides.
2- I've imported structural framing family in my generic model, but I cannot assign a parameter to the length of the beam, and the length is constant, and I can change the length just in 3D view. Do you know how to assign a parameter to the length?
3-I couldn't use the predefined walls it the family, so, I used extrusion. But I couldn't use the Revit windows family on the extrusion walls. Is there any way to use the predefined wall systems in Revit to be able to use the windows families?
Here is the picture of my model:
I'm trying to add a new unit's type for a specific drawing.
Is there any way to add one with its corresponding calculation parameter?
Under the "Style and Standard Editor" Panel i cannot modify it.
The End result is to display a " Symbol after the first Units instead of the in unit (see enclose picture that i manipulated to display the end desired result).
I created a new unit using “Edit” and selected “Units,” then clicked on “New” and entered the info and saved the info. However, I mistyped info on the unit which created 2 units with the same name. How do I delete the incorrect unit?
View 1 Replies View RelatedI downloaded student version Autodesk Inventor 2012 a few month ago. When I start the inventor and go to OPEN, I had the standard options in both inches and millimeters.
BUT someone I work with kind of deleted all my SI unit settings on my computer (thought that we will never use it cuz we are in America...) and now when I want to make something new, i only have Inch options to choose from.
Now I need to make something that is in millimeters, but when I go to File> OPEN, I only have standard options in INCHes....
Should I delete my current Inventor and Download a new one? OR Can I download a folder or file that contains all the SI unit ?
I used to add some parts to CC in Inventor and also some profiles. Whenever I create an assembly I want these profiles I made myself to be counted in millimiteres, whereas it is counted in how many pieces of this long profile I used.
I want these custom made profiles to be counted same as standard pipes from CC- in millimiters.
I purchased Xara 8 in June but now have a new computer. I downloaded the program to my new computer and all seemed to be okay with the install, but I can't change the unit default from millimeters to inches. In fact I can't change the units to anything; it keeps reverting back to millimeters. Then I tried changing the font default and it changed it to millimeters no matter which unit I chose. I don't know if any of the other options can be changed. I generally change them as I need them. Should I uninstall it and try again? I lost my CD copy to theft and have to use the online download.
View 4 Replies View RelatedHow do I insert, or what Family do I insert Concrete Unit Masonry? I have CMU piers for my foundation.
View 2 Replies View RelatedI'm trying to make an ATTDEF (in combination with a circle/reference object) to show coordinates in meters, even though the drawing units are in mm.
The general drawing units may not be changed. I want the output to be 7,453 rather than 7453. Yes, with comma and three decimals.. But how ?
I started 2D drawing in ACAD2010 without any settings like unit,layers etc.
But i want to know, How to find the unit am i using the dimension ? like inches or mm.
I am using ObjectArx with C# and I am wondering how to take the dimensions and dimension unit using the ObjectArx SDK. Is there possible way and what is the best approach.
View 1 Replies View RelatedAccording to Draw arcs: "Slope Specifies the direction of the arc’s slope. Enter a negative value for a concave (inward) slope. Enter a positive value for a convex (outward) slope. A slope of 0 creates a straight line".What is the unit of the value of the arc's slope in adobe illustrator ?is it in mm or degree or what ? and how i can get the length of the created arc ?
View 1 Replies View RelatedI'm wondering if there's a unit I can use that's smaller than a pixel in photoshop, not just for rulers and viewing purposes. There's an image shown below that has a small white border about 1/20th (at least) of a pixel between two other pixels. Is there any way I can add a small border like this between two pixels within photoshop?
View 8 Replies View RelatedI'm getting a strange error with my iLogic code running parameters in my assembly. When I have one "if....then..." my rule runs fine. Even two statements work. But for some reason when I get to a certain number of statement I get an error: I've attached some sample code and snapshots of my error screens.
If FLANGE_STYLE_BOTTOM = "2in 150 BFV" ThenParameter("RD FLANGE:1", "OD")="6"Parameter("RD FLANGE:1", "BC")="4.75"Parameter("RD FLANGE:1", "HOLE_SIZE")=".75"Parameter("RD FLANGE:1", "NUB_HOLE")="4"Else If FLANGE_STYLE_BOTTOM="3in 150 BFV" ThenParameter("RD FLANGE:1", "OD")="7.5"Parameter("RD FLANGE:1", "BC")="6"Parameter("RD FLANGE:1", "HOLE_SIZE")=".75"Parameter("RD FLANGE:1", "NUB_HOLE")="4"Else If FLANGE_STYLE_BOTTOM="4in 150 BFV" ThenParameter("RD FLANGE:1", "OD")="9"Parameter("RD FLANGE:1", "BC")="7.5"Parameter("RD FLANGE:1", "HOLE_SIZE")=".75"Parameter("RD FLANGE:1", "NUB_HOLE")="8"Else If FLANGE_STYLE_BOTTOM="5in 150 BFV" ThenParameter("RD FLANGE:1", "OD")="10"Parameter("RD FLANGE:1", "BC")="8.5"Parameter("RD FLANGE:1", "HOLE_SIZE")=".875"Parameter("RD FLANGE:1",
[code]...
I created a couple of Unistrut structural member and published them to the CC.
Once they were in the CC I setup the proper code allowing these members when placed in an assembly to show up as shown in the parts list.
Now sometimes when the member is an odd length it will show up with the decimal places in the part number (i.e. P1001--46.621) This is fine when it comes to the part number showing up as a decimal. In the description we are now wanting to show this in fractional form such that 46.621 in the part number shows up as 46-5/8 in the description.
When I edit the family table for these members, specifically the columns that house this coding, I am not seeing anywhere on how to change this. Does this can be done and if so what the coding is to accomplish this? Without changing the global units of the drawing?
Inventor Suite 2012
Windows 7
Below is a code I managed to scramble together to display the unit used in the drawing template. The units are selected once the drawing is opened based the Standards ANSI and ANSI-mm from the styles library.
The code displays the units used in template as a custom iproperty called "drawingUNITS". This code works great however, I would like it if possible to be more clearer to the shop guys looking at the drawings.
I would the result to be
ANSI = Imperial (or inches) and ANSI-mm = Metric
is there somewhere in the code provided that I can get my desired result?
' To use this rule, create a Text parameter named Standard in the drawing.' Assign it values such as:
' ANSI' ANSI-mmdoc = ThisDoc.DocumentcustomPropertySet = doc.PropertySets.Item("Inventor User Defined Properties") 'Make sure drawingUNITS property existsTry prop = customPropertySet.Item("drawingUNITS")Catch 'Assume error means not found customPropertySet.Add("", "drawingUNITS")End TryDim drawingDoc as DrawingDocument = ThisDoc.DocumentFor Each standardX In [code].......
Is there a way of adding a unit called "AR" as a unitless type?
I want this for B.O.M. QTY overrides to be able to carry an adjustable QTY defined and stored in the Part file.
I know I can accomplish this by overriding the B.O.M. on the drawings but I want to automate the drawings as much as possible. In order to Automate the process as much as possible I require that ALL B.O.M. data is to be stored in the Parts.
In particular item 29 - same part number, exactly the same parameters (I checked them one by one), but a "Varies" for Unit Qty.It is a truss frame, and item 29, as many others, has "trim to frame" end treatments.
View 1 Replies View RelatedWe are developing a multistory housing project that will have 5 unique unit plans. What I would like to know is the best approach to implimenting the unit plans in revit?
In autocad, we would create an xref of the unit, then xref as needed on base plans. Thus the ability to place multiple xrefs of the unit on various levels while maintatining the ability to make one change to the original unit plan and have it update thru out the project....How would we do this in Revit?
I am totally new to Inventor. I have a lot of experience in Illustrator and Photoshop; what I want to do is possible in those programs, but I have not figured out how to do it in Inventor.
Essentialy, I want to make a closed path from a spline and a straight line— this will become a custom shape that I want to turn into a solid. Is it possible or should I just use the split feature?
In the end, I am trying to make a solid that is similar to a section of this necklace, minus the curved portion that connected them to the necklace, itself.
I'm inserting an xref, and its coming in at a weird scale.... I noticed that in the 'external reference' dialog box the 'block unit' scale factor is set to a weird scale (.0394), but it will not let me edit it.
View 5 Replies View Related