Illustrator :: Can Import Settings From CS5 Live Trace To CS6 Image Trace
Oct 7, 2012
I'm loving CS6 Illustrator, except for one thing. Image Trace. Here, Adobe seem to have taken away the two most usefull settings from Live Trace, and replaced all the presets with ones that are pretty much unusable. I almost always used either 'Comic Art' or 'Lettering' to trace hand-drawn images, but they're both gone. None of the new settings are good enough, even if I make a custom one. The main issue is that the sliders in Image Trace are for completely different things to those in Live Trace, so it's difficult to translate one set of settings into the other.
With Image Trace, I cannot get the same results as with Live Trace, and so far, have found myself having to have Illustrator CS5 open at the same time as CS6, just so I can get workable traces.
I don't know if it's possible, but is there any way to import the presets from Live Trace, or even the full tool, into CS6, to replace the new Image Trace presets?how to make the equivelant of Comic Art in Image Trace's new settings?This is a close up of a file I was trying to trace, showing the major difference in quality between the two CS versions.
Left: CS5 - Comic Art setting.
Right: CS6 - This is a custom setting, but is the closest I have come to Comic Art thus far.
As you can see, the definition of Image Trace is far lower in quality than Live Trace, giving me one large connected blob of colour rather than the distictly separate lines produced in Live Trace.
View 7 Replies
ADVERTISEMENT
Aug 8, 2012
I just started using CS6, jumping from CS3. A major tool I use is Live Trace, and I have custom settings for that. I cannot find a way to make Image Trace behave the way Live Trace did for black and white line drawings. The results I get in CS6 are far inferior to those I got in CS3 in terms of retaining the look of the original raster image. Otherwise, I will have to leave CS3 installed just to do my Live Trace.
Here is a sample of what I mean. You can see the quality degredation in CS6 compared to CS3. (And it's much more obvious when it's full size and full resolution.)
My settings used in Live Trace (CS3) were:
The settings I tried in CS6 that gave the above result were:
View 24 Replies
View Related
Jan 5, 2013
how to use Live Trace in Illustrator but now instead of the Tracing Options window having a button that says "Trace" it's now showing a button that says "Set to Default." I'm sure something isn't selected right or something similar, but I can't figure it out. why "Trace" is no longer an option?
View 2 Replies
View Related
Oct 1, 2012
We have recently updated our office Adobe Creative Suite, and are now using Illustrator CS6 to clean-up hand drawn sketches. When we run any sort of trace on a simple, black and white line drawing, the trace results in a negative image: the white background turns black, and the outline of the sketch is white. We have tried checking the "ignore white" box and several other settings changes. Initially, for our first few times using the new suite this didn't happen:
View 1 Replies
View Related
Apr 20, 2013
I have a fairly good quality image with black text on a white background and I'm trying to trace it using live trace. I want to be able to manipulate it like normal text would allow you to. The font is a serif font and contains some thinner lines, so whenever I live trace it, it comes up quite uneven and all over the place. I've tried tinkering with the settings but nothing I do really seems to make much difference. My question is, are there any specific settings or modes that are best suited for doing traces of text, or any other methods for that matter? I can't recreate the text using a pen tool - it would take way too long!
View 3 Replies
View Related
Dec 19, 2013
I created an image using live trace and saved it as a ".ai" file. I thought that saving it like this would allow to have the same quality in After Effects. However the After Effects image looks pixilated. I am still new to both programs. Attached are two images, one from After Effects and the other from Illustrator.
View 1 Replies
View Related
Aug 23, 2013
Image trace shifts artwork once the trace is finished. Have to nudge art back into place each time.
View 6 Replies
View Related
Feb 27, 2013
I did a live trace and it did pretty well. The image I traced was fairly simple. But I ended up with a lot of extra pieces in what should be a solid color. I've tried Select > Object > Stray points, but that didn't work. I have large area that I want to be one solid piece. Within this area, there are lots of little "pieces" that are the same color... How do I merge them all into one piece? I tried "Unite" in the pathfinder, and that didn't work, either.
In case I'm not being clear, basically, I want to do what the "smooth" function does in Photoshop... but in Illustrator.
I'm using CS6 on a Mac.
View 4 Replies
View Related
Sep 20, 2012
Is it better to use Live Trace with images that have no color and are just black and white and to apply all color in AI with Live Paint bucket or can you get good results with images that have color when using Live Trace?
View 3 Replies
View Related
May 31, 2013
I have done a live trace of a somewhat complex GIF that I want to simplify into black silhouette. What I have is a black object filled with dozens of irregularly shaped closed paths within it. I want to get rid of these, and was thinking I could just choose "ungroup," then select all closed paths except the large one enveloping them and delete them. I'm obviously misunderstanding something, though, since Illustrator sees what I have as one object already. The only way I'm able to remove all those little white shapes is to delete their anchor points one by one. There has to be a better way . . .
View 3 Replies
View Related
Sep 30, 2012
I'm trying to "Live Trace" an image and AI says "Tracing" in the layers pane and just sits there forever. See image below:
View 3 Replies
View Related
Sep 18, 2013
Out of the blue, whenever I use live trace, it crashes my Illustrator and I have to force quit. I have tried all different sized jpegs, big and small, force quit.
View 1 Replies
View Related
Jul 15, 2013
How to recover the Live Trace button as well as the entire option on a CS5 top bar and Objects menu? Mine has vanished, and while i am still able to find Live Trace under the OBJECT section, it won't allow me to use any of the options. I've tried restarting, I've checked if my images were locked, I've opened various files hoping the outcome would be different, but nothing worked. I've even tried going to Keyboard Shortcuts and keying in a new shortcut, but it won't allow me to as no box appears for me once clicked.
View 7 Replies
View Related
Oct 17, 2013
I am new to Illustrator - I am scanning simple components on a technical drawing. These are line drawings - closed contours (for example, the outline of the cross-section of an aircraft wing). I am attempting to use Illustrator to convert the jpg scan to vector form - am saving the result as a .dwg file. I am then importing this into SolidWorks where I am attempting to extrude the form of the component prior to 3D printing.
In Illustrator I am using live trace to create the vector representation. However I'm finding that the vector representation appears to take the form of a number of segmented vector representations. As a result, in SolidWorks I can obviously not extrude the component.
Are there are additional steps within Illustrator that I should be using so as to clean up/unify the vector representation?
View 6 Replies
View Related
Jun 15, 2013
So I am making a logo and I am trying to vectorize it. But, when I use the Live Trace, it messes up the lines, and makes it look like it was painted. So is there another way to vectorize my logo without the Live Trace?
View 2 Replies
View Related
Sep 27, 2012
I'm working on pdf image files, 300 dpi, and I want to use the Image Trace tool to vectorized these ones. The result has to be under 4 colors, and the file is a mozaic of photos calibrated 3mm x 3mm.
The purpose is to vectorize the whole image ( composed with approximately 800 photos )I did different tests with the settings of the Image Trace tool with samples of 12 x 12 mm ( 4 photos x 4 photos ) and the result is correct. But when I try to do the same with the entire image, the result is just horrible The entire image is sized 200 mm height and 130 mm width, but the import format is exactly the same than the samlpes I made my presets on.
I was thinking that Illustrator should act the same with the full image than with the small one, it just took more time to calculate the rendering, but apparently not.
View 4 Replies
View Related
Dec 6, 2013
Why the custom option for live trace would be ghosted in CC?
I haven't changed any settings, and as far as I know it's been like that since the initial install.
The option is there... can't click it...
I'm running Win 7 Pro 64-Bit with 32G Ram and a core i7.... so my specs shouldn't be the issue
View 4 Replies
View Related
Mar 18, 2014
i would like to live trace (vectoriser) a pdf drawing but i can't open the dialog box live trace(vectorisation de l'image) on version 17,1.
View 1 Replies
View Related
Jan 27, 2014
Mask button in Live Trace menu?
View 4 Replies
View Related
Aug 4, 2013
I use live trace quite a bit and have created several custom tracing options in CS4. How di I get them into CS6. When I open a scaned document in CS6, The custom field in the trace menu is greyed out so I don't know how I could recreate them from scratch.
View 1 Replies
View Related
Jul 24, 2013
This might sound a bit odd, but the "Simple Trace" settings in CS5 were perfect for tracing my artwork for a graphic novel I'm working on. I upgraded to CS6 earlier this year but due to other issues had to take a break working on the graphic novel.
I came back today and drew the source images as I had before (in Paint Tool SAI using only black pen brush for a clean line) and then exported this to a PNG file which I then imported into Illustrator. I assumed that Default in CS6 was the same as Simple Trace in CS5, but it gives far fewer details than Simple Trace does! Is there anyway I get get the Simple Trace settings back?
View 5 Replies
View Related
Jul 30, 2006
best way of converting some inked line drawings into vectors. I currently do a lot of fabric designs which consist of very simple line drawings, which I then ink up. What I'd like to do is scan these in and then fill them. I'd also like to be able to resize them, hence the vector conversion.
I've had a play with the Live Trace feature in Illustrator, but have to admit that it baffles me slightly. I currently can't find a setting within Live Trace that will trace the image without increasing the size of the stroke - e.g. all the presets just turn my nice fine sketches into big fat black splodges.
I am also having trouble in taking the converted Vectors and transfering them over to Photoshop - any time I either try to copy the layer directly over or open the saved Illustrator file in Photoshop it comes out all jagged.
someone will be able to describe the steps I need to take to do the following:
1. Convert a line drawing into a Vector without drastically increasing the line weights.
2. Take this new Vector from Illustrator to Photoshop without losing any image quality.
View 2 Replies
View Related
Jul 17, 2009
I used illustrator to live trace an image and then copy it to photoshop and paste as a shape layer. Usually, it fills in the paths with the foreground color and it's exactly what I want. For some reason, this time though, when i paste as a shape layer, the entire selection becomes the foreground color and when the layer is simplified it's just a big block with the same color as the foreground color. Why is this working on some of my traces and not others?
View 3 Replies
View Related
Feb 25, 2012
I have recently buy one software ( embroidery) , with the corel draw x5 essential.
- but I can not find the trace function to convert bitmap to vector , like power trace.
View 7 Replies
View Related
Apr 22, 2013
I have been able to do this in the past, but today illustrator cs6 will not let me do an image trace. I go under window, then over to image trace and it shows up, but it is light and it can't be opened. I also tried going under Object, then to Image Trace and the same thing.
View 7 Replies
View Related
Jun 19, 2012
I'm trying to outline an image. In photoshop, I did find edges (save), then opened the image in illustrator and did image trace. I obtained a perfectly outlined image.I can't obtain the same results using illustrator image trace alone.I've adjusted the advance settings a few times to get the same result but with no luck. Threshhold and corner settings are ok, but I'm getting more paths and noise than I want, with the settings at low/1 respectively.I also tried the gray scale setting since the image is mostly gray, expand, etc, but no dice).
View 6 Replies
View Related
Jun 26, 2012
i used to trace QR-Code images because I often need them as scalable vector data. That worked nearly perfect in the old versions. I just had to to a little clean-up to some corners but every anchor-point was perfectliy in place. The new Tracer in CS6 places the anchor-points not at the "Black-Square-corners" of the original image. The attaced image shows the Tracer-Preview and settings. The orange points indicate the not correct traced areas.
View 1 Replies
View Related
Feb 13, 2013
i try and use live trace in simple trace it works but if i use any of the color options to trace my image just goes white cant see a thing ?? Ive tried several different jpegs a photoshop file etc etc tried placing, importing dragging image to illustrator with the same results call adobe they want 50 bucks.
View 2 Replies
View Related
Jun 13, 2013
I had a lot of good presets and actions that I've come to rely on. Now that I have Illustrator CC, I'm not using it :-( because I can't find where to migrate the presets from CS6 to CC.
One in particular that I need are my Image Trace presets... I have looked for them in the Presets folder, and even tried moving the "ImageTracing.jsx" script from CS6 to CC, but I don't understand how this is supposed to work.
Presets are so much easier to handle in Photoshop!
View 3 Replies
View Related
Mar 1, 2013
For my work I use the Image Trace a lot. When I Image Trace something and then expand it, it shifts the art over. Every once in a while I wouldn't mind but it does it every time and I have to go back and nudge it back into place by setting the original layer as a template and then looking at it in Outline mode. Here is an example of the shift...
I never had this issue in any other version of Illustrator and I have been working with it since 8. When I have multiple items to Image Trace on one of my jobs and I Image Trace on each one individually, it does it in random directions. Sometimes down and to the right, sometimes up and to the left and sometimes it doesn't do it at all.
Here are the settings I am using...
I am image tracing 1200ppi bitmaps and I don't need it to be any more exact than it is now becuase I am then offsetting it .05" and using that as a relief for our products. But ignoring the shift would make one of our CNC machines mill through the art. Anything to stop "THE SHIFT" would be great. I am using up precious time in my pre-production schedule to be constantly doing this.
View 2 Replies
View Related
Apr 5, 2013
I am new to Illustrator, but know that I need to select the object I'd like to trace before using Image Trace. The problem is every time I used the selection tool, the entire picture is selected, and then traced.
View 3 Replies
View Related