Photoshop :: Pasting Live Trace From Illustrator To Photoshop
Jul 17, 2009
I used illustrator to live trace an image and then copy it to photoshop and paste as a shape layer. Usually, it fills in the paths with the foreground color and it's exactly what I want. For some reason, this time though, when i paste as a shape layer, the entire selection becomes the foreground color and when the layer is simplified it's just a big block with the same color as the foreground color. Why is this working on some of my traces and not others?
how to use Live Trace in Illustrator but now instead of the Tracing Options window having a button that says "Trace" it's now showing a button that says "Set to Default." I'm sure something isn't selected right or something similar, but I can't figure it out. why "Trace" is no longer an option?
I'm loving CS6 Illustrator, except for one thing. Image Trace. Here, Adobe seem to have taken away the two most usefull settings from Live Trace, and replaced all the presets with ones that are pretty much unusable. I almost always used either 'Comic Art' or 'Lettering' to trace hand-drawn images, but they're both gone. None of the new settings are good enough, even if I make a custom one. The main issue is that the sliders in Image Trace are for completely different things to those in Live Trace, so it's difficult to translate one set of settings into the other.
With Image Trace, I cannot get the same results as with Live Trace, and so far, have found myself having to have Illustrator CS5 open at the same time as CS6, just so I can get workable traces.
I don't know if it's possible, but is there any way to import the presets from Live Trace, or even the full tool, into CS6, to replace the new Image Trace presets?how to make the equivelant of Comic Art in Image Trace's new settings?This is a close up of a file I was trying to trace, showing the major difference in quality between the two CS versions.
Left: CS5 - Comic Art setting. Right: CS6 - This is a custom setting, but is the closest I have come to Comic Art thus far.
As you can see, the definition of Image Trace is far lower in quality than Live Trace, giving me one large connected blob of colour rather than the distictly separate lines produced in Live Trace.
I just started using CS6, jumping from CS3. A major tool I use is Live Trace, and I have custom settings for that. I cannot find a way to make Image Trace behave the way Live Trace did for black and white line drawings. The results I get in CS6 are far inferior to those I got in CS3 in terms of retaining the look of the original raster image. Otherwise, I will have to leave CS3 installed just to do my Live Trace.
Here is a sample of what I mean. You can see the quality degredation in CS6 compared to CS3. (And it's much more obvious when it's full size and full resolution.)
My settings used in Live Trace (CS3) were:
The settings I tried in CS6 that gave the above result were:
I did a live trace and it did pretty well. The image I traced was fairly simple. But I ended up with a lot of extra pieces in what should be a solid color. I've tried Select > Object > Stray points, but that didn't work. I have large area that I want to be one solid piece. Within this area, there are lots of little "pieces" that are the same color... How do I merge them all into one piece? I tried "Unite" in the pathfinder, and that didn't work, either.
In case I'm not being clear, basically, I want to do what the "smooth" function does in Photoshop... but in Illustrator.
Is it better to use Live Trace with images that have no color and are just black and white and to apply all color in AI with Live Paint bucket or can you get good results with images that have color when using Live Trace?
I have done a live trace of a somewhat complex GIF that I want to simplify into black silhouette. What I have is a black object filled with dozens of irregularly shaped closed paths within it. I want to get rid of these, and was thinking I could just choose "ungroup," then select all closed paths except the large one enveloping them and delete them. I'm obviously misunderstanding something, though, since Illustrator sees what I have as one object already. The only way I'm able to remove all those little white shapes is to delete their anchor points one by one. There has to be a better way . . .
We have recently updated our office Adobe Creative Suite, and are now using Illustrator CS6 to clean-up hand drawn sketches. When we run any sort of trace on a simple, black and white line drawing, the trace results in a negative image: the white background turns black, and the outline of the sketch is white. We have tried checking the "ignore white" box and several other settings changes. Initially, for our first few times using the new suite this didn't happen:
Out of the blue, whenever I use live trace, it crashes my Illustrator and I have to force quit. I have tried all different sized jpegs, big and small, force quit.
How to recover the Live Trace button as well as the entire option on a CS5 top bar and Objects menu? Mine has vanished, and while i am still able to find Live Trace under the OBJECT section, it won't allow me to use any of the options. I've tried restarting, I've checked if my images were locked, I've opened various files hoping the outcome would be different, but nothing worked. I've even tried going to Keyboard Shortcuts and keying in a new shortcut, but it won't allow me to as no box appears for me once clicked.
I have a fairly good quality image with black text on a white background and I'm trying to trace it using live trace. I want to be able to manipulate it like normal text would allow you to. The font is a serif font and contains some thinner lines, so whenever I live trace it, it comes up quite uneven and all over the place. I've tried tinkering with the settings but nothing I do really seems to make much difference. My question is, are there any specific settings or modes that are best suited for doing traces of text, or any other methods for that matter? I can't recreate the text using a pen tool - it would take way too long!
I am new to Illustrator - I am scanning simple components on a technical drawing. These are line drawings - closed contours (for example, the outline of the cross-section of an aircraft wing). I am attempting to use Illustrator to convert the jpg scan to vector form - am saving the result as a .dwg file. I am then importing this into SolidWorks where I am attempting to extrude the form of the component prior to 3D printing.
In Illustrator I am using live trace to create the vector representation. However I'm finding that the vector representation appears to take the form of a number of segmented vector representations. As a result, in SolidWorks I can obviously not extrude the component.
Are there are additional steps within Illustrator that I should be using so as to clean up/unify the vector representation?
So I am making a logo and I am trying to vectorize it. But, when I use the Live Trace, it messes up the lines, and makes it look like it was painted. So is there another way to vectorize my logo without the Live Trace?
I created an image using live trace and saved it as a ".ai" file. I thought that saving it like this would allow to have the same quality in After Effects. However the After Effects image looks pixilated. I am still new to both programs. Attached are two images, one from After Effects and the other from Illustrator.
I use live trace quite a bit and have created several custom tracing options in CS4. How di I get them into CS6. When I open a scaned document in CS6, The custom field in the trace menu is greyed out so I don't know how I could recreate them from scratch.
best way of converting some inked line drawings into vectors. I currently do a lot of fabric designs which consist of very simple line drawings, which I then ink up. What I'd like to do is scan these in and then fill them. I'd also like to be able to resize them, hence the vector conversion.
I've had a play with the Live Trace feature in Illustrator, but have to admit that it baffles me slightly. I currently can't find a setting within Live Trace that will trace the image without increasing the size of the stroke - e.g. all the presets just turn my nice fine sketches into big fat black splodges.
I am also having trouble in taking the converted Vectors and transfering them over to Photoshop - any time I either try to copy the layer directly over or open the saved Illustrator file in Photoshop it comes out all jagged.
someone will be able to describe the steps I need to take to do the following:
1. Convert a line drawing into a Vector without drastically increasing the line weights.
2. Take this new Vector from Illustrator to Photoshop without losing any image quality.
I drew a line art picture, traced over it in pen, scanned it into Illustrator.
I selected the autotrace tool and clicked it on the lines, it didn't work. I clicked IN the lines, and it traced around the lines...see attachment. Also it left out a bunch of shapes.
I'm rather confused. Should I just not use auto trace for this? If so, what's the better tool?
I have an illustrator file (various circles and half circles) built with various layers, I would like to copy and past these layers into Photoshop and change them to a shape layer, but when copying each layer and pasting the vector falls in slightly different place to the illustrator file, how can I keep the position the same as the illustrator?
I am trying to paste 3 shapes from Illustrator into Photoshop. The shapes are layered; I need them to be separate layers in PS. I am copying the shapes from AI and pasting into PS as separate Shape layers. The problem is that when I paste the shape layers, the position in which they land on the canvas is not consistent... they don't line up properly. This means I will have to manual reposition the shapes in Photoshop?
(as a side note, I'm baffled that there is not way to export my AI document as a PSD, and retain the layers as vector shapes... exporting to PSD requires I rasterize the artwork. Has this been added to CS6?)
Im running Photoshop and Illustrator CS on a G5 with os X and ever since I've installed them I've been unable to copy and paste text from illustrator without converting to outlines.
I get an "operation cannot complete because of an unknown error" message
I have set both PS and Illustrator (both latest versions) to "North America Web/Internet". Both documents are RGB and have the sRGB IEC61966-1 profile.
When I copy a square in Illustrator and paste it into PS RGB 19,78,110 (the color in Illustrator) changes to RGB 18,78,109. It doesn't matter whether I paste it as pixel, smart object or shape layer. The sampled color differs from that in Illustrator.
It's really unnerving when you do web mockups in Illustrator and then copy/paste to PS for image creation.
I create artworks using both Illustrator and Photoshop by pasting different elements as smart objects in Photoshop on different layers but I often have a problem.
To make the pasted content positioned exactly on the same place as in Illustrator, I create a box with no fill and stroke encompassing the whole artwork (with the thick pink frame on the image below) and paste different elements along with the encompassing box on different layers in Photoshop.
The problem is that often during the creation of the artwork it may require using a clipping path containing objects bigger than the encompassing box. Then when pasting in Photoshop the size of the bounding box containing the invisible parts of the objects is factored in instead of the visible parts only.
The image bolow is a simplified example. On the left side is the selection in Illustrator but when pasted in Photoshop although it keeps the same visibility as on the left size, the encompassing frame is the bounding box shown on the right side and this messes up the position of the placed objects. I know the problem can be avoided if I know in advance how big the eventual artwork including the invisible objects would be and create an encompassing box big enough but often this is not the case. What do yo think would be the easiest way to fix this problem once it occurs?
Ok, before a bunch of you tell me I need to go to my preferences and uncheck the "Resize image during place" option, I've already done that and it's till resizing which is whay I'm here.
Ok, so here's the story:
I built a pixel perfect graphic in Illustrator. Working space have identical pixel resolutions in both my illustrator and photoshop files. When I copy and paste my vector graphic to photoshop as a smart object it automatically resizes to an illogical size. SO currently, my 436x436 graphic tries to paste in to my 2048x1536 file as 1607x1607. I don't get it. I've rebooted with the same result. Everything I've been able to find on the forums so far seem to indicate that unchecking the "Resize" option should prevent this but it's having no effect. I am running the latest version of CS6 (subscription) and starting to get a little bit crunchy.
When I paste into Photoshop CS5, the illustrator selection is too small or too big... auto Resize does'nt work. It used to work perfectly in CS4.What can i do ?
I have vector artwork that is not aligned to a pixel grid in Illustrator. In CS5, I would be able to paste the vector object as a smart object into Photoshop file that was larger than the illustrator image and resize larger while holding shift to keep the ratio the same.
However with Creative Cloud, if I have a square in Illustrator that happens to be 17.3px by 17.3, then paste to Photoshop in a file that has a larger canvas than the paste, I get uneven horizontal and vertical ratios (width = 18; height = 17). It seems to overestimate the width and make it appear fatter horizontally (which is the wrong aspect ratio). This is very noticeable when vector objects (like perfect circles and small icons) get scaled up in Photoshop.
I have tried unchecking and checking "Snap Vector Tools and transforms to Pixel Grid" but this doesn't seem to fix it. The only way I've been able to get this ratio to be kept is to create a new document with the size automatically changed to clipboard dimensions (which are the desired 17x17). When you paste as smart object, it now uses the correct aspect ratio.
