I use live trace quite a bit and have created several custom tracing options in CS4. How di I get them into CS6. When I open a scaned document in CS6, The custom field in the trace menu is greyed out so I don't know how I could recreate them from scratch.
View 1 Replies
how to use Live Trace in Illustrator but now instead of the Tracing Options window having a button that says "Trace" it's now showing a button that says "Set to Default." I'm sure something isn't selected right or something similar, but I can't figure it out. why "Trace" is no longer an option?
View 2 Replies View RelatedWhy the custom option for live trace would be ghosted in CC?
I haven't changed any settings, and as far as I know it's been like that since the initial install.
The option is there... can't click it...
I'm running Win 7 Pro 64-Bit with 32G Ram and a core i7.... so my specs shouldn't be the issue
I'm trying to "Live Trace" an image and AI says "Tracing" in the layers pane and just sits there forever. See image below:
View 3 Replies View RelatedI'm loving CS6 Illustrator, except for one thing. Image Trace. Here, Adobe seem to have taken away the two most usefull settings from Live Trace, and replaced all the presets with ones that are pretty much unusable. I almost always used either 'Comic Art' or 'Lettering' to trace hand-drawn images, but they're both gone. None of the new settings are good enough, even if I make a custom one. The main issue is that the sliders in Image Trace are for completely different things to those in Live Trace, so it's difficult to translate one set of settings into the other.
With Image Trace, I cannot get the same results as with Live Trace, and so far, have found myself having to have Illustrator CS5 open at the same time as CS6, just so I can get workable traces.
I don't know if it's possible, but is there any way to import the presets from Live Trace, or even the full tool, into CS6, to replace the new Image Trace presets?how to make the equivelant of Comic Art in Image Trace's new settings?This is a close up of a file I was trying to trace, showing the major difference in quality between the two CS versions.
Left: CS5 - Comic Art setting.
Right: CS6 - This is a custom setting, but is the closest I have come to Comic Art thus far.
As you can see, the definition of Image Trace is far lower in quality than Live Trace, giving me one large connected blob of colour rather than the distictly separate lines produced in Live Trace.
I just started using CS6, jumping from CS3. A major tool I use is Live Trace, and I have custom settings for that. I cannot find a way to make Image Trace behave the way Live Trace did for black and white line drawings. The results I get in CS6 are far inferior to those I got in CS3 in terms of retaining the look of the original raster image. Otherwise, I will have to leave CS3 installed just to do my Live Trace.
Here is a sample of what I mean. You can see the quality degredation in CS6 compared to CS3. (And it's much more obvious when it's full size and full resolution.)
My settings used in Live Trace (CS3) were:
The settings I tried in CS6 that gave the above result were:
In CS5 there was an option to use the Live Paint Bucket on a newly traced image and there were also gap options to close gaps when doing this. I do not see these options in CS6. Where are they?
View 1 Replies View RelatedI did a live trace and it did pretty well. The image I traced was fairly simple. But I ended up with a lot of extra pieces in what should be a solid color. I've tried Select > Object > Stray points, but that didn't work. I have large area that I want to be one solid piece. Within this area, there are lots of little "pieces" that are the same color... How do I merge them all into one piece? I tried "Unite" in the pathfinder, and that didn't work, either.
In case I'm not being clear, basically, I want to do what the "smooth" function does in Photoshop... but in Illustrator.
I'm using CS6 on a Mac.
Is it better to use Live Trace with images that have no color and are just black and white and to apply all color in AI with Live Paint bucket or can you get good results with images that have color when using Live Trace?
View 3 Replies View RelatedI have done a live trace of a somewhat complex GIF that I want to simplify into black silhouette. What I have is a black object filled with dozens of irregularly shaped closed paths within it. I want to get rid of these, and was thinking I could just choose "ungroup," then select all closed paths except the large one enveloping them and delete them. I'm obviously misunderstanding something, though, since Illustrator sees what I have as one object already. The only way I'm able to remove all those little white shapes is to delete their anchor points one by one. There has to be a better way . . .
View 3 Replies View RelatedWe have recently updated our office Adobe Creative Suite, and are now using Illustrator CS6 to clean-up hand drawn sketches. When we run any sort of trace on a simple, black and white line drawing, the trace results in a negative image: the white background turns black, and the outline of the sketch is white. We have tried checking the "ignore white" box and several other settings changes. Initially, for our first few times using the new suite this didn't happen:
View 1 Replies View RelatedOut of the blue, whenever I use live trace, it crashes my Illustrator and I have to force quit. I have tried all different sized jpegs, big and small, force quit.
View 1 Replies View RelatedHow to recover the Live Trace button as well as the entire option on a CS5 top bar and Objects menu? Mine has vanished, and while i am still able to find Live Trace under the OBJECT section, it won't allow me to use any of the options. I've tried restarting, I've checked if my images were locked, I've opened various files hoping the outcome would be different, but nothing worked. I've even tried going to Keyboard Shortcuts and keying in a new shortcut, but it won't allow me to as no box appears for me once clicked.
View 7 Replies View RelatedI have a fairly good quality image with black text on a white background and I'm trying to trace it using live trace. I want to be able to manipulate it like normal text would allow you to. The font is a serif font and contains some thinner lines, so whenever I live trace it, it comes up quite uneven and all over the place. I've tried tinkering with the settings but nothing I do really seems to make much difference. My question is, are there any specific settings or modes that are best suited for doing traces of text, or any other methods for that matter? I can't recreate the text using a pen tool - it would take way too long!
View 3 Replies View RelatedI am new to Illustrator - I am scanning simple components on a technical drawing. These are line drawings - closed contours (for example, the outline of the cross-section of an aircraft wing). I am attempting to use Illustrator to convert the jpg scan to vector form - am saving the result as a .dwg file. I am then importing this into SolidWorks where I am attempting to extrude the form of the component prior to 3D printing.
In Illustrator I am using live trace to create the vector representation. However I'm finding that the vector representation appears to take the form of a number of segmented vector representations. As a result, in SolidWorks I can obviously not extrude the component.
Are there are additional steps within Illustrator that I should be using so as to clean up/unify the vector representation?
So I am making a logo and I am trying to vectorize it. But, when I use the Live Trace, it messes up the lines, and makes it look like it was painted. So is there another way to vectorize my logo without the Live Trace?
View 2 Replies View RelatedIs the image trace feature any better at tracing scanned business cars and newsprint ads in order to extract a logo? Clients never seem to have clean copy to supply me with.
View 1 Replies View Relatedi would like to live trace (vectoriser) a pdf drawing but i can't open the dialog box live trace(vectorisation de l'image) on version 17,1.
View 1 Replies View RelatedMask button in Live Trace menu?
View 4 Replies View RelatedI created an image using live trace and saved it as a ".ai" file. I thought that saving it like this would allow to have the same quality in After Effects. However the After Effects image looks pixilated. I am still new to both programs. Attached are two images, one from After Effects and the other from Illustrator.
View 1 Replies View RelatedHow do I use custom when tracing an image? It doesnt higlight when i roll over it and wont let me use it.
View 1 Replies View Relatedi try and use live trace in simple trace it works but if i use any of the color options to trace my image just goes white cant see a thing ?? Ive tried several different jpegs a photoshop file etc etc tried placing, importing dragging image to illustrator with the same results call adobe they want 50 bucks.
View 2 Replies View RelatedI used illustrator to live trace an image and then copy it to photoshop and paste as a shape layer. Usually, it fills in the paths with the foreground color and it's exactly what I want. For some reason, this time though, when i paste as a shape layer, the entire selection becomes the foreground color and when the layer is simplified it's just a big block with the same color as the foreground color. Why is this working on some of my traces and not others?
View 3 Replies View RelatedI had to reinstall CS6 and am now looking for my old AI Image Trace custom presets. I'd like to restore them if possible from a Time Machine backup so I don't have to recreate a setting, but I can't seem to find where those are located.
View 4 Replies View Relatedbest way of converting some inked line drawings into vectors. I currently do a lot of fabric designs which consist of very simple line drawings, which I then ink up. What I'd like to do is scan these in and then fill them. I'd also like to be able to resize them, hence the vector conversion.
I've had a play with the Live Trace feature in Illustrator, but have to admit that it baffles me slightly. I currently can't find a setting within Live Trace that will trace the image without increasing the size of the stroke - e.g. all the presets just turn my nice fine sketches into big fat black splodges.
I am also having trouble in taking the converted Vectors and transfering them over to Photoshop - any time I either try to copy the layer directly over or open the saved Illustrator file in Photoshop it comes out all jagged.
someone will be able to describe the steps I need to take to do the following:
1. Convert a line drawing into a Vector without drastically increasing the line weights.
2. Take this new Vector from Illustrator to Photoshop without losing any image quality.
Image trace shifts artwork once the trace is finished. Have to nudge art back into place each time.
View 6 Replies View RelatedI've imported a png of a simple black drawing on a man (Like you get on a toilet door) with a transparent background and tried to trace it to a vector but I can not get rid of the white background. i've tried it as a jpeg to see if the trace command would generate two layers one for the main drawing and one for the background that I could delete, but it di dnot. I tried setting the Trace fuction to just outline but that did nto work either.
how to get rid of the background when tracing a simple image or break apart the object to get at the background shape?
I have an assignment for school where I am suppose to trace an eagle onto another layer. However the image disappears while I am trying to trace it. Is this some sort of setting that I need to change?
View 6 Replies View RelatedI've used image trace to trace the outline of a street grid and expanded the trace into paths. However, after doing so, I realized I wanted the streets a bit thicker, so I increased the stroke value.
Is there a way to adjust the old paths to match the new outline? I tried saving it as a .jpg and retracing but the quality was subpar. Any way to "redo" the trace in the original file, or somehow tell Illustrator to move the paths to match the increased stroke? I need them to coincide once more with the edges of the streets. URL...
I use Illustrator CC.I have made a custom Image Tracing Preset and want to use it on a folder containing a sequence of pictures I want all to vectorize automatically. Programming an Action isn't an option as the Action recorder doesn't record which tracing preset is used for image tracing. I found I can use the pre-installed Image Tracing Script [URL] in which I only need to specify the correct number of the Image Tracing Preset. And that became a big problem.
View 2 Replies View RelatedI have a pen sketch scanned with resolution ~ 7000x5000px 300DPI. When I'm trying to trace the whole image with Illustrator CS6 into b/w, I am losing details overall. Example is on the left side. It's just part of the image.
However, when I tried to isolate a couple small raster pictures from the big one and trace them separately, I got pretty good results comparing to tracing a whole picture. The isolated images are with resolution ~700x800px 300DPI.
The problem is that I can't isolate all elements in sketch then combine after tracing, it's hell lot of work. So my hope is that there is some technique of tracing big images.
