Yesterday this issue was like it should be in LT 2012. Today it had changed.
Lets say i give command L. It nicely shows up in command field, i press enter, now i have command LINE. It asks for first point. I give 0,0,0. Problem is that suddenly that 0,0,0 shows in screen next to cursor instead of command line.
I want to give all commands and related to the command line. How can i change this back as i cannot find correct tab?
I have encountered a problem with some of my 'Dynamic Blocks', which seem to have become corrupted & have incorporated differing attributes. The text has moved out of the field it was originally intended to be in & I can not get it to return to its correct location, using 'Block Editor'. After testing one particular block, I have discovered it has picked-up contrasting attributes:
(i) If one 'double-clicks' on the dynamic block the 'Attributes dialog box' offers one set of 'Text Options.' However,
(ii) If the Block Attribute Manager command 'Battman' is used for the same block, different 'Text Options' are shown?
These are un-editable, without losing all of the data in the drawing. Moreover, I cannot get into the depths of the drawing to synchronize it without losing all of the data? Plus, it will not allow me to redefine the block, via the design center, Blocks (Right-Hand Click & redefine). Plus, I cannot drop a fully functioning block in from another drawing & redefine?
(Again) The “leader” of the “dimension text” disappears when the text is moved! Why?
I’m wondering why the “leader” of the “dimension text” disappears when the text is moved.
How can I control this setting?
I need to show this “leader” all the time. Is that possible?
Please, have a look on the screenshots below (the file is attached).
I have themed a map and added an expression text label to each parcel. I went to move the text of one parcel and it worked fine. Now When I try and select any other labels to move I can't select them. Only the parcel itself will allow selection.
Map 2012
I have a .jpg file with an image, which I copied from the Clipboard. I now want to add text NEXT to the image. That is I now want to type text and position the text after is typed.
When I use the Text Tool, the text cannot be moved.
Is it possible to create a field that will show only a portion of the contents within an text object? Maybe using diesel or something?
Example:
There is a text object that contains "FIRST TEST", is it possible to create a field from that object that contains the first 5 letters of the text "FIRST". If the original text was changed to "SECOND TEST" the field would be updated "SECON"
I have designed a C# application to To Print I Cards Of School. Here I am sending data from my application to a CDR FILE (Already Created ) Which Contains ADDRESS Text Field..Now I Need to Print Address(which contains 60 characters or more) on this Text field .
I Have Used The following c# Code.. To Replace Address text field that contains text 'Address '.....
s.Text.Replace('Address',"Text To be replaced .......")...here s is Active shape...
This Works Fine But How can i WRAP TEXT....of Address field.
I've created an input text inside a symbol called "Asks" in a timeline triger i use:
message = sym.$("texto"); // texto is a textfield
message.html("Write here: ");
inputMessage = $('<textarea />').attr({'type':'textarea','value':'', 'id':'message'});
inputMessage .css ('font-size', 18);
inputMessage .css ('box-shadow', '#0a81fb');
[Code] ......
Any success in having a Field text match an Attribute value? I can't get it to work.
View 9 Replies View RelatedAny way to convert multiple fields to text? I've got a bunch of m-text objects, and they each have a field that references a polyline. (example: field=elevation of pline). I like to convert the fields to text when I need to send the file to someone, so that they can't inadvertently change the values. For now, I use the right click menu in the text editor for convert field to text, but I'd like to be able to change multiples at once. CAD 2008.
View 1 Replies View RelatedWhen I copy and paste a block of text, and then use the x and y coordinates to move it into position, the text characteristics change. It becomes all caps, and italicized text becomes non-italic. This happened with both Perpetua and Stone Sans.
View 7 Replies View RelatedIs there a way to force text pulled from a drawing property to wrap to fit a cell of Mtext? In otherwords,... a multi line field? Some of our drawing titles are several lines, and instead of wrapping inside the field box in our titleblock, the text just spreads out all over. I'd rather not go back to the old method of having a custom property for Line 1, Line 2 etc....
Acad 2011
Is there anyway to link a field text from one layout to another layout? I need something that when I change a title to one layout the other layouts will change automatically.
View 9 Replies View RelatedI want to insert a text into a block that contains a field. The field I want to look up the value of an attribute that is also contained in the block. Now when I have this complete and then change the block attribute the fields do not update to the new value of the attribute. An example file is attached.
Now I am open to creating the block in a different way, so any way to make this concept work? I want everything to be contained in the block.
I already tried to work around my problem by making 2 separate attributes, where the 2nd attribute contains the field that looks up the value of the 1st attribute - this did not work. Another thing I tried was after the block was made, I edit the 2nd attribute by inserting the field and this worked fine - the down side is that the field is not the default of the attribute (so the block must already be present in the drawing model space and that instance must be copied to make more).
I'd like to have something like field text in a titleblock definition, where instead of the user manually typing the entry, they would have to choose option A or B for example.
View 3 Replies View RelatedI would like to link a series of text lines in an autocad drawing to there corresponding fields in an excel sheet, I can not use tables in autocad because of the way other software uses the text in autocad. I have attached files of the text layout in acad and of the sheet in excel. One thing that keeps me from using tables in acad is that every line of text is on a different layer, with tables you can't control the layer of table its always on the current layer.
View 6 Replies View RelatedI'm editing blueprints for my summer job and I was wondering if there was a way to add a text field to the hover over menu of a region or polyline. I simply want to add the function of the room to the hover menu.
View 1 Replies View RelatedWhat is the Command that Converts a Field to Text so that I can stop a Field updating after the initial set-up? I need to apply this in lisp.
View 9 Replies View RelatedI have had an issue where my text field shows up as "####" even though the the value is still showing up in the custom properties menu. I've tried updating the field and re-inserting the field and it keeps showing up as "####"
View 1 Replies View RelatedI can not edit the M text & field text in title box.My system is Windows Xp Professional 2002, Inventor 11.
I tried to install Microsoft Hotfix KB918118 as I did before, but I coulden't. System massege show my system is newer than that, so I do not need it. Then I installed Hotfix for text problem caused by Microsoft Hotfix KB918118. I can edit M Text now, but still I could not edit Field Text.
I would like to make a split balloon where the top retrieves the item number and the bottom is a prompted text area. Is this possible?
If the above is not possible my fallback plan would like to make a sketched symbol function in exactly the same way. I believe this option would be significantly more code. If I have to go this route, is there a way to directly mimic getting the item number like the balloon function does?
--My current process involves attaching a user symbol, getting the proper leader node, attached entity, geometry, model geometry, containing occurrence, and then BOM of the component occurrence. Keep in mind this doesn't work for phantom or reference components.
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
I am trying to enlarge the text from an exported cad drawing from Dialux (lighting calculation software)...it has exported a field of values over a large area but the text is really small and illegible when its plotted as an A1 pdf
Is there anyway to blow all the text values up at once without moving them from their positions with relation to the boundaries of the roads and buildings? Here is a screenshot of the view with CAD...this is a small area of the entire scheme and those little black smudges are the numbers i need to scale
CAD Screenshot.jpg
I guess in a 3D program this would be equivalent to having the pivot point located in the centre of each set of numbers so you could scale them using the centre of each number as its scale point but I am stumped by how to do this in Autocad Architecture 2011..
What way can i read text from a text field on stage then put this value into a variable?
I can easily write text to a text field via:
sym.$("my_text_field").html("Some text...");
But I want to read this text into a vairable? For example:
var theText = my_text_field.text
All of a sudden my text is incredibly small. The resolution is set at 300. The "Resample image" box is unticked. I've tried resetting the character...still the text is smaller than it should be. For example, 8 point Times New Roman can barely be seen with the naked eye. I haven't done anything different. What gives?
View 15 Replies View Relatedchange copyright year in field text (through edit definition) in title block.
Our titleblocks have a copyright year statement that needs updating everytime a new year comes around.
Currently we select the titleblock, edit definition, edit text, and make the change. Currently reads "2012 (company B) CORPORATION"
I have many texts fields in my drawing. I need edit the format of all field. e.g field - 1030.60 convert to - 1.030,60 Is there any lisp doing that? I mean, select multiple field and change it.
View 3 Replies View RelatedI have a situation where I have a AutoCAD table linked to a Excel table to retrieve lots of general information for a standard drawing. That works just fine. In additionally I can use the fields "formula" field name and select a cell in the AutoCAD table to pull the data from the cell to the field, and this works for table cells that are numeric, but some of the cells are text based, and for these situations AutoCAD simply gives me the #### result. Is there a way to use a field to display text data from a AutoCAD table Cell?
View 3 Replies View RelatedHow to plot a survey drawing with field data in text format, (using Autocad 2008, so that the point number and XYZ coordinates appear on the drawing.
View 1 Replies View RelatedI Have used Photoshop forover five years, mainly for web graphics. I was changing a section of a current web site which contained text and needed redesigning. I noticed that the text on the replacement image was not smoothed as the original was despite using exactly the same font. The 'jaggies' were very pronounced. I have trawled the help pages and all the preferences available and can't find away to return the text to 'smoothed'.
View 3 Replies View RelatedI am using a symbol that includes a several text boxes. Each text box includes "prompted text" and "drawing properties". When I insert the symbol onto a drawing, the "Edit Property Fields" menu appears. In this menu, I can input my prompted field text or see the various "drawing properties".
My question is, how do I change the order that these property fields are displayed? It seems as if it depends on the order that the text boxes were created while defining the symbol definition. Is there any other way to change the display order?
I had been using 2.8.0, adding some text to graphics. I came back from a brief break, and the next time I added text, the font was extremely narrow, to the point that it was illegible.
At first I tried simply shutting GIMP down and restarting. No such luck. Next, I uninstalled GIMP, then I ran CCleaner to get rid of any residual files and settings, then I reinstalled GIMP, still using the 2.8.0 Windows installer, and still, the issue persisted.
** EDIT ** I tested ALL fonts, the problems happens with each one.
So I uninstalled again, did the CCleaner thing, then downloaded and installed 2.8.8, and the problem still persists.
Again, fonts and texts had been working without an issue all day. I stepped away from my PC to get food. There was no one in the house that could have messed with any settings, no pets to accidentally press keys or anything like that.
I am at a complete loss. I've looked at every possible setting I could think of that could possibly impact how fonts are rendered, and changing settings still does nothing.
I have found an inconvenient workaround for this problem, but at least I can now get some work done.
The problem still occurs when I try to insert text into an EXISTING image, but if a create a NEW IMAGE with a background color, text displays and renders as it should. If I choose a transparent background, I still get the problem with the text rendering too narrow to be legible.
So something about existing images and/or transparent backgrounds contributes to this issue. But as long as I create my text layer in a new image, I can then just copy and paste that layer into the image I want to edit, and I can even edit the text once it has been pasted without problems.
Still, this is very inconvenient, especially when I am trying to place text in precise positions.