I'm having is that this is happening with a dynamic block. I don't know how it got this way...some 'genius' in my office went into this file and screwed something up, and saved it...so now I'm left with the task of fixing it.
When I go into the block, it opens as a regular drawing, with a dynamic block inside of it...as opposed to opening in the block editor. I just need to know how to get this back to the way it should be, without having to redraw the entire thing from scratch. I made a few scrap-copies of the drawing to fool around with and I can't find a solution. I tried deleting the block and purging it, I tried exploding it, and I tried saving it directly from the block editor...nothing worked.
I have a problem with selecting all references to a specific dynamic block. When I use the filter below only block “D2” is selected, which is not a dynamic block, Block "Bulb120227” which is a dyn block is not
Dim values() As TypedValue = { _ New TypedValue(0, "INSERT"), _ New TypedValue(-4, "<OR"), _ New TypedValue(2, "D2"), _ New TypedValue(2, "Bulb120227"), _ New TypedValue(-4, "OR>") _ }
How should the filter be done to filter out the dyn block that I want several block should be filtered out in one selection.If it is possible to achieve with just a filter at all?
I have created a dynamic block with a stretch, flip and rotate. Everything works great in its file. When I insert it in another file, the grips move but the block does not change.
We use a number of blocks with block tables for data extraction here, and whenever one of the blocks is modified and updated, all of the block tables reset to the default value. This happens for any block reference change, not just changes to the block table (which makes sense that it would reset).
How can we update these blocks without having to manually change all of the block tables afterwards?
When I use visibility of dynamic block, I found it's a great feature. But when I have more objects involved in it there will be too many states.
If we have 'visibility action' beside 'visibility set' maybe it will make thing better, when use it with lookup table. Each visibility action can has it's own set of objects. Put actions in lookup table to hide and show the set combined with them.
We have a dynamic section marker block. You can flip it, rotate it and stretch it. Some of our drawings have a lot of them. For some instances of the block that are rotated, opening the drawing or inserting another copy of the block causes the fill in the arrow to move back to its original orientation (see images). The darn things even plot incorrectly.
Flipping the broken ones back and forth fixes them, but it is silly that a drafter would have to do that with each one.
I am trying to make a dynamic block below. I need the "end" of the line to be "moveable". I've tried the point parameter and the stretch action with no luck.
I have a block that I'm trying to convert for dynamic use.
In the first image, you'll see the items that I want to have rotatable in blue. The items in red should NOT rotate. That part seems to work fine. But the items that do rotate don't behave as expected.
I created the rotate parameter selecting the center of the red circle as the base point. Shouldn't that cause ALL the items to rotate about that center point?
As you'll see from the second image, the blue line rotates about some other point.
EDIT: Well I guess it only does it if I have the blue horizontal line defined with a length constraint. I also need to have that line dynamic--I need to make it longer/shorter.
I've attached a dwg file with the block in it--it's at the top of the block list (___SectMark2).
I have created a dynamic block and have applied some lookup tables to it but its not working just the way I want it. I think its to do with the custom entry on the lookup tables. If I delete the custom entry when i select the block in model space the drop down select box to allow me choose a selection is no longer available. How can I remove the custom entry and still have the block working normally. I've attached the block.
I have a dynamic block with attributed text that I want to remain horizontal right reading even when the block is rotated. I have set up the parameters and the actions how I was taught and even revisited one of AU's downloadable lessons to try to get it correct. my settings are the same as in the lesson. I have the rotate parameter / action set to only the geometry and did not select the attributed text. I also have the attribute locked. Nothing I do gets the text to rotate with the block and stay horizontal and right reading. It will either rotate the text along with the block or just leave the text stationary. I have tried adding a point parameter to the text but that doesn't seem to work either. I am using Base ACAD 2010 I have also attached the block for troubleshooting.
“Dynamic block” that contains an inserted “field”,
I’m now encountered into two problems with this regard:
Why sometimes we get the number sign “####”?How can the field automatically be updated in case a “stretch” is made without the need to go and click “update fields”?How to make the “precision” of the field value (which represent the length) to be 5 such that the 2568 will appear as 2570 and the 2563 will appear as 2565 I’m attaching the block in case your time permits to have a look
I am trying to create a dynamic block that represents a cable with an attribute attached. The block is essentially a line that runs along the Y axis. I have created a distance parameter with a stretch action attached. The line is to remain anchored at the top and the bottom end is permitted to stretch.
Problem: I have an attribute inserted to the left side of the line (offset at -2mm TC insertion) at a rotation angle of 270. When I select the stretch grip (in the drawing environment) I would like the attribute to remain centered with the line maintain the offset and maintaining the rotation angle. I have exhausted all of my options (limited experience).
I was wondering if there is a way to link one parameter to another. What i'm doing is creating a theater flat block that has adjustable length and width. There are support members that are needed when it gets big enough. Right now i have them set to a Visability parameter and have to select to turn them on and off in model space. Is there a way to link the Visability so that it changes based on the Linear Distance parameter's lenth?
i have a dynamic block that my firm has been using. we're updating our dimstyles - and our new leader is a custom (close to open 30 but with heavy accents).
anyway - i'm a little new and vague as how to change the leader within the dynamic block. i fiddled with it several times - but with no success.
We have specialized electrical schematic drawings on what is termed roll-drawings. These roll-drawings are simply 12" tall and variable width type drawings. We've had some as short as 24 inches and as long as 900 inches. As a result we use these section dimensions to distinguish circuit boundaries. It's not a real dimension, just a way to distinguish what circuit is located where. I've tried to recreate it using a block for improved automation as currently we just use a lisp routine that draws an arrow and lines. It looks like the screen capture of my block below. Is it possible to have the inside endpoints of the lines automatically stretch outwardly toward the arrows as the attribute Value changs?
I am attaching my dynamic block that I am having difficulty finalizing. My goal is to be able to stretch or resize the hvac block, based on the size that is provided to me (ala 24x24, 36x36, 48x72, etc) (Stretch Action), I have that figured out, and I have the symbol in the center that stays centered as the block size changes, (Move Action).
Here is my problem, I want the symbol in the center to stay centered and scale based on a ratio as the overall size gets larger. So for example: if my size is a 24"x24" I want the symbol in the center to be approx 12" dia, but if the size gets up to say 60"x60" I want it to scale accordingly (so it could be like 48" dia), specifically maintaining the size based on the x axis, so if the it gets to a 60x72", I'd like it to still be centered but size according to the 60 width, and not stretch and look awkward. I want the center symbol to scale and stay centered in the rectangle as I scale the size.
I have created a dynamic block with stretch points. I used the tester in the block editor and all works fine, but when I insert the block into a drawing, the grips for the stretch action are in a completely different place...I don't mean a different place on the block, but a different place in the drawing...way out there. so if I go into the block editor for the block while I'm in the drawing...the parameters have now moved way out of the way also, in the block...but if I actually open up the block itself and then go into the block editor, all the parameters are where i placed them in the first place.
I designed a dynamic block to represent the profile of boreholes, and its different layers (depths, in profile) are linked to the respective description text by a leader.
Problem is when I flip the text with its leader, the tip of the arrow loses contact with the borehole. And as I flip more times, the further it gets from its original position.
I suppose it's a bug, and I wonder how can it be fixed:
If you edit attribute settings in a dynamic block, and put:
Constant: yes
Lock position: no
You can't neither change the position in the Model, nor edit text. I suppose that with this two settings selected the way showed above, one should be able to move the attribute in Model space.
I am creating some table of contents. The first column contains symbols that are inserted blocks. Now, when I've created dynamic blocks I've made them to have more visibility states. If I insert the block that has such states, only the saved state is visible. Is there any way that I can use more visibility states when inserting some block into table.
At the moment the only solution is to insert another simplified block that I've created just for this insertion. That way my blocks library is getting bigger and bigger only because of this. I don't use simplified blocks in my drawings, except for the thingy mentioned above.
I want to convert existing lighting blocks with attributes to a new dynamic block. I created a few visibility states but when i insert the block I can't move the attribute text around. I don't have to redefine the attributes within the block editor to make this work. What is the best way to deal with existing blocks with attributes?
Is it just me or do the actions associated with parameters disappear on occasion from the block editor? Sometimes a regen will make them reappear, other times not. Closing/opening the block editor is one way to make them visible again (worked a few times at least).
I am trying to add a list of External References to MTEXT. The diesel expression $(xrefs) works fine within RTEXT but when I enter it into MTEXT the result shows "$(XREFS)??
I have a block that I would like make dynamic. It is a fishhook arrow for a roundabout traffic sign. I would like to rotate the head to various angles, and have the body of the arrow adjust. I already have the ability to stretch the two end points in their direction, and rotate the head, but the curved part of the arrow body needs to adjust for the new head location. I tried dynamic stretch, but it would not attach to the rotate dimension. How do I get these arcs to stretch along their radii and associate the end arc points to the near end of arrow head?
I had one thought of using multipe arcs so that they would overlap more or less as rotated, but this is a pretty crude workaround.
I was able to take the attributes from block references in independent .dwg files and and bring them across to a new drawing via import. At this point, there are a few attributes that I would like to be able to add to each block reference once it's created. I've designed a GUI where users can input data, and this input (string data) I'd like to add to the block reference as a tag and a corresponding value.
The basics I understand are to create an attribute reference object. Set the properties / parameters for this object (tag and value (originally as a string) and them append the attribute to the block reference. What i don't know how to do is to actually create the new tags and values in the code so that they can later be appended. I'm in C# and so far i've got this:
foreach (ObjectId id in blockBtr) { if (id.ObjectClass == RXClass.GetClass(typeof(AttributeDefinition))) {
Is there any way at all to explode all block references in a drawing so that basically all block references no longer exist and they're just sat in their relevant layers.
We have generic drawings of assemblies we use in layout drawings as standard details. We insert them as blocks with one or two dimensions that vary (geometry remains the same-these are just representative for information).
We could define these as attribute values so that a user types a length that displays in the drawing but if we wish this to be part of a dimension we would have to explode the dimension to manually replace the mtext dim value with an attribute tag.
This seems unsubtle so I edited the dim value to be a field referencing the attribute value and made the tag invisible. This worked in the drawing-the attached shows the attribute tag ALL THREAD and the resultant dimension text (as a field value) replaced with the default value LENGTH.
When the drawing is inserted as a block it duly prompts for a value for ALLTHREAD and any value can be typed-`1200, 3500, 1672 etc. but the dimension does not update from the default value LENGTH, even after using attsync, regenall. So, if the drawing recognizes the attribute then how come it cant recognize the graphic via a field reference and update it? Is it buried too deep in the database hierarchy for LT to make sense of it maybe?
I dont want to explode the dim but it looks like I may have too if this cannot be made to work.
