I have created a dynamic block and have applied some lookup tables to it but its not working just the way I want it. I think its to do with the custom entry on the lookup tables. If I delete the custom entry when i select the block in model space the drop down select box to allow me choose a selection is no longer available. How can I remove the custom entry and still have the block working normally. I've attached the block.
Ok over the past few weeks I've got pretty much most of the Dynamic Block stuff down except this feature.
I've attached a drawing. In the middle I used VISIBILITY to have all the different weld types. I need something at the end to where Weld Tails can be added if they're needed but you can only use one Visibility per block. I'm also going to need something at the front of the block for different symbols like "Field Weld" and "All Available". If I can figure the Tails out then I can do the other one.
I have been looking for about three days on how to do the array with-in the dynamic blocks, but have been very unsuccessful. What I am trying to do is make a TJI joist that you can have a look up table that is classified as 'offset' so that you can eventually strech the joists to standard spacing, and use the array to work. So that I dont have to have a ton / zero visibiliy states.
Dynamic block is for a title block which can be horizontal or vertical and a few different positions.
My lookup table controls the orientation and position of all the items including a number of attributes. But for two attributes I have allowed a grip on the Point Parameters so they can be dragged left/right if there is not enough room when the text is longer.
I can reposition the attributes but if I reposition twice then the Lookup table resets to its "Unmatched" configuration which I don't want. I believe I have to have an "unmatched" setting and "allow reverse lookup" and at the same time I want the user to be able to customize the position of these attributes.
I created a dynamic block of signatures when i was messing around with dynamic blocks and have been using it since. i have to update this dynamic block and add another signature to it but for the life of me i cannot remember how to add/remove from the lookup table. i added the name to the visibility table i just cant remember how to edit the lookup table ?
I have been off playing in the Inventor world for awhile and now that I am back in the 2D world, I find my memory fails me. I am trying to create a dynamic block for terminal boxes. Some of these boxes are round so I need to control the diameter from the lookup table. Just how do I do that? Placing a diameter constraint parameter gets me the various diameters I need but I cannot get those into the lookup table.
I am unsure weather to post this in Dyn Block technical or Fields as it comprises elements of both.
I am trying to get a field to return a 'lookup properties' value...
Actually, what I am trying to do is use a field to display either a + or a - depending upon upon the state of a flip parameter.
How I have been trying to achieve that is by using a lookup table to assign:
Input Properties.....Lookup Properties Not flipped........=............+ Flipped.............=............-
Then I'm setting a Field to look at the Object 'Lookup Parameter' and return 'Lookup Action'.
The field then displays '#########' when testing the block.
When I return to edit the field it complains 'the object referenced y the field has been erased'. Both the table and parameter are still there, so I don't know what the problem is. Is there a better way of having a field return a specific value based upon a parameter state?
I found this block online. I'm trying to do something similiar. I want the attribute to be dynamic (in context). The author of this block set a visibility and then 92) lookup actions, but only (1) lookup parameter.
I made dynamic block with hatch and strech action and I have a poblem, when I press lookup action 0.5m it strech and i need to text value the same 0.5m. I attached dwg file where i do that.
I am creating some table of contents. The first column contains symbols that are inserted blocks. Now, when I've created dynamic blocks I've made them to have more visibility states. If I insert the block that has such states, only the saved state is visible. Is there any way that I can use more visibility states when inserting some block into table.
At the moment the only solution is to insert another simplified block that I've created just for this insertion. That way my blocks library is getting bigger and bigger only because of this. I don't use simplified blocks in my drawings, except for the thingy mentioned above.
I have a dynamic block, that represents a stirrup.
I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.
The problem is that I can't make this grip moveable )
My boss gave me a copy of Autocad 2012. I've messed around with architecture 2010 before so the ribbons are no surprise. One thing I have noticed that's really different is the dynamic block constraints & block table actionblock properties table? I looks very similar to the lookup property table
It's about "Block Properties Table",I want to use a Block Properties Table to manage a Dynamic Block.
I have defined a Dynamic Block a and its Block Properties Table in Autocad2010,this is the screenshot of the Block Properties Table(a1:d1=100,d2=200;a2:d1=100,d2=400;a3:d1=100,d2=600.) Now I want to insert the Dynamic Block using .NET API.after I input a command,the block of a2(d1=100,d2=400) is inserted. I have the code about it, but the code is not complete. this is the Dynamic Block
this is the the screenshot of the Block Properties Table .
the result:
the code about it:
[CommandMethod("readBlockTable")] static public void CmdReadBlockTable() { Editor ed = Application.DocumentManager. MdiActiveDocument.Editor; // select a block reference [Code].......
I've created this dynamic block for work. Its an overhead cupboard with 4 doors. My problem is that when i create a table through data extraction the value for the length and height for the doors aren't shown (The column this there with a heading, no value), the length of the cabinet and visibility is though. Do i need to assign an action or something for the value to be displayed?
Is there a trick in using a dynamic block in a table cell? When a dynamic block is inserted into a cell, any visibility can be viewed (Properties Manager) in that cell if the visibility state has a block in it. What happens if the visibility state does not have a block. That is, if the view has exploded block so one can use parts in actions etc? Can I view ANY state in a cell regardless if it has a block or not? Or must the visibility states have blocks to be able to use it in the table cell?
I've created a titleblock with a menu to select sheet size, a single set of attributes that serve all the different sheets, but now I'm trying to find a way to add a table.
The table is to sit above the title box and include information on: New revision number Text detailing changes since the last revision (might be single or multiple line text) Date of new revision . The bottom line needs to sit flush to the top of the title block so the top line would be moving up the sheet as new lines are added if that makes sense?
The "Main Stretch" parameter does not correspond with the Block Properties Table. What does this parameter need to be attached to?The paramter will adjust with the pull down options of the Block Properties Table.
Whenever I add a block property table the window that should be opent doesn't open. The strange thing is that I think it actualy is open but i just don't see it on my screen. The same thing gous for the screen that allows you to ad a parameter to a lookup set. by folowing this link you can see what i mean, it gets interesting after 30 seconds.
So, I'm familiar with creating Property Set data and schedule styles and all, but I am having trouble wrapping my brain around the following, I would love to know how you tackled it in the simplest way possible:
I need to show a schedule for Windows and Doors, that will read the drawing or selection, and list all the door and window types. Now, that is not so bad, but there is a caveat that I can't get past.
We offer two or more Manufacturers for said windows and doors and are being asked to show tags on our floor plans that reference a table that says:
"For window type "1", ship either Manufacturer A - Part No. X, or Manufacturer B - Part No. Y
What I can't wrap my brain around right now is how to get Property Set data to know that "1" means both of those parts, and not one or the other. The way this is supposed to work, is for each of our plans we are to have only the types ("1", "2", etc.) that are currently shown on that plan, and if one of those windows or doors change to a different type, have the schedule update automatically.
I would prefer not to need to write a LISP or Vlisp that does this, but am open to using VBscript in the Property Set Data, I am just unsure of how to write that into a Formula.
I have created a dynamic block with a stretch, flip and rotate. Everything works great in its file. When I insert it in another file, the grips move but the block does not change.
i was wondering if it's possible to change the default precision of values in the drop down menu for linear parameters when using a block properties table from 4 digits to 0.
See attached file, when opening the dropdown menu, the centre-to-centre widths of the chair are displayed in a value with 4 digits "behind the comma" and i would like that to be 0.
This is my first dynamic block, and I am trying to make a pipe elbow that is selectable for pipe diameter, arc angle of elbow, AND radius of elbow. I got the diameter and the arc angle just fine, but I can't figure out how to do the radius of the elbow. I used a lookup table for the diameter constraints and I used my visibility state for the angle, seeing as I couldn't find a way to accomodate arc angles with a lookup table. What I'm stuck on is the radius bit.
I need to be able to select the radius or the elbow as either 1.5x, 2x, or 2.5x the diameter of the pipe. So for example, if I have a twenty inch pipe diameter, I need to be able to set the centerline radius of the elbow as either 40, 50, or 30 and then have the outside and inside radii fit proportionally. So in the case of a 20 in diameter, I would need one block with one variation that has radii of 30, 40, and 50, another variation with radii 20, 30 and 40, and yet another variation with radii 40, 50, and 60. I could easily make a reverse lookup table to do this for a single size pipe, but in order to do it for each pipe diameter I would need to be able to cross reference the other lookup table to pull the diameter value, and then have the radii respond to that value.
If this is even possible? And if it is not possible, how I could edit the arc angles with a lookup table instead of a visibility state? Because if I could do that I could use my visibility state to do the radii instead. My other options are to create a second and third dynamic block for each variation, or to add each individual radii variation to my lookup table. The latter of which I won't do because that is far too many options for a lookup table that already spans beyond the extents of my monitor. How I could accomplish all three of these tasks with a dynamic block.
I am trying to add a table that I can edit like an attribute but have it in a block, Basically I am trying to put information for all the poles in an electrical panel, but im not using MV parts just a block is there anything that can be recommended in this instance.
Just another note I need to reference 72 poles and 5 colums for each of these.
I have created a sample drawing, to illustrate to the design manager at work that we can use AutoCAD to assist us with the scheduling of materials, but I am unsure of all the ins and outs of it myself!
See attached drawing to make sense of the following:
Ordinarily we would use a panel reference number for all 50mm panels of identical length, i.e., all 1200mm panels (our standard width) will be assigned a panel code, often P01... etc etc. From the data extraction (EATTEXT) command, as you can see, all 50mm cleanroom panels under the 'name' column are according the block name, in this case, I've called it "Cleanroom Panel 50mm". Is there any way to assign an individual tag to all panels of equal length, yet maintain the same block - or is this simply asking too much?
The reason for this is that although the autocad generated table is ideal for quantifying and placing orders for materials, we are a design and build firm, all our construction workers will need to be able to identify where on a plan an individual panel is, i.e., all well and good to say one panel is 332mm long, and one is 350mm long, but he will need to know what panel is to be installed where...
Whenever I add a block property table the window that should be opent doesn't open. The strange thing is that I think it actualy is open but i just don't see it on my screen. The same thing gous for the screen that allows you to ad a parameter to a lookup set. by folowing this link you can see what i mean, it gets interesting after 30 seconds.
[URL]
Is there a variable that decides where on your screen you see these screens?
When I use visibility of dynamic block, I found it's a great feature. But when I have more objects involved in it there will be too many states.
If we have 'visibility action' beside 'visibility set' maybe it will make thing better, when use it with lookup table. Each visibility action can has it's own set of objects. Put actions in lookup table to hide and show the set combined with them.
We have a dynamic section marker block. You can flip it, rotate it and stretch it. Some of our drawings have a lot of them. For some instances of the block that are rotated, opening the drawing or inserting another copy of the block causes the fill in the arrow to move back to its original orientation (see images). The darn things even plot incorrectly.
Flipping the broken ones back and forth fixes them, but it is silly that a drafter would have to do that with each one.
I'm having is that this is happening with a dynamic block. I don't know how it got this way...some 'genius' in my office went into this file and screwed something up, and saved it...so now I'm left with the task of fixing it.
When I go into the block, it opens as a regular drawing, with a dynamic block inside of it...as opposed to opening in the block editor. I just need to know how to get this back to the way it should be, without having to redraw the entire thing from scratch. I made a few scrap-copies of the drawing to fool around with and I can't find a solution. I tried deleting the block and purging it, I tried exploding it, and I tried saving it directly from the block editor...nothing worked.
I am trying to make a dynamic block below. I need the "end" of the line to be "moveable". I've tried the point parameter and the stretch action with no luck.
I have a block that I'm trying to convert for dynamic use.
In the first image, you'll see the items that I want to have rotatable in blue. The items in red should NOT rotate. That part seems to work fine. But the items that do rotate don't behave as expected.
I created the rotate parameter selecting the center of the red circle as the base point. Shouldn't that cause ALL the items to rotate about that center point?
As you'll see from the second image, the blue line rotates about some other point.
EDIT: Well I guess it only does it if I have the blue horizontal line defined with a length constraint. I also need to have that line dynamic--I need to make it longer/shorter.
I've attached a dwg file with the block in it--it's at the top of the block list (___SectMark2).
