AutoCAD 2010 :: Dynamic Block Rotation Changes
Dec 28, 2012
We have a dynamic section marker block. You can flip it, rotate it and stretch it. Some of our drawings have a lot of them. For some instances of the block that are rotated, opening the drawing or inserting another copy of the block causes the fill in the arrow to move back to its original orientation (see images). The darn things even plot incorrectly.
Flipping the broken ones back and forth fixes them, but it is silly that a drafter would have to do that with each one.
View 4 Replies
ADVERTISEMENT
Jan 7, 2013
I have a block that I'm trying to convert for dynamic use.
In the first image, you'll see the items that I want to have rotatable in blue. The items in red should NOT rotate. That part seems to work fine. But the items that do rotate don't behave as expected.
I created the rotate parameter selecting the center of the red circle as the base point. Shouldn't that cause ALL the items to rotate about that center point?
As you'll see from the second image, the blue line rotates about some other point.
EDIT: Well I guess it only does it if I have the blue horizontal line defined with a length constraint. I also need to have that line dynamic--I need to make it longer/shorter.
I've attached a dwg file with the block in it--it's at the top of the block list (___SectMark2).
View 9 Replies
View Related
Mar 22, 2013
So I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
View 2 Replies
View Related
Jun 14, 2012
Is it possible to mirror a rotation within a dynamic block?
See the attached drawing. I am trying to have two rotations within a dynamic block, but only one grip. When the grip is rotated one half of the block rotates while the other half rotates in reverse. The resulting action would be much like the wings of a butterfly.
I have tried many different combinations of parameters, actions and constraints with no luck. The block in the attached file was as close as I could get. Have I reached the end of what AutoCAD is capable of?
View 7 Replies
View Related
Nov 25, 2013
I'm just trying my hand at learning to create some dynamic blocks, but need a solution to keep the text unrotated. I have attached a file of my troublesome file for you experts to look at, if possible.
PileTest.dwg
The file is basically a plan view of 4x foundation columns for overhead line towers (pylons). These towers can be different sizes and at different orientations, hence the dynamic options I have applied. However, when I rotate the block I want the text to rotate with it (to keep aligned with each column A, B, C, D), but I don't want rotation to be applied to the text, if that makes sense?
I have a feeling that constraints might work, although I know nothing about them, but these usually lag my PC. At present I am having to explode the block and apply a 0 rotation to all the text.
View 8 Replies
View Related
Jul 11, 2011
I have a section symbol that I want to rotate and keep the text at 0degress relative to UCS. The text is not in the middle so I can't rotate about the cetner of the text. I'll attach the block so it's more clear.
Right now the only fix is to assign a seperate rotation grip to both attribute text items.
View 4 Replies
View Related
Sep 30, 2013
I am making a simple continuation block (attached) and I am trying to get it to have a rotation parameter along the polyline. I am able to do that, but the only issue is the flip parameter goes all weird when I do so (the text starts distancing itself from the polyline when stretched, rotated and flipped).
View 4 Replies
View Related
Nov 21, 2013
I can not for the life of me get my attributes to rotate with my block. I've attached the block to better understand what I'm talking about. I'd like the attributed text to rotate with the brown line. I don't care if the text ends up upside-down, I just want it to rotate with the block.
View 1 Replies
View Related
Aug 29, 2011
when trying to create dynamic rotation for a block with attributes. If I constrain the attribute to a line in the block it damaged the behavior of the block when using the dynamic rotation.
I tried both multiline and non- multiline attributes. I tried to fiddle with the "constraint settings" and leave only the Parallel constraint running with no effect.
When I open a new clean acad drawing and paste the block there, no problem.
View 2 Replies
View Related
Jan 11, 2008
We use this light switch block for work. For the life of me, I can't figure out how to make the attribute to stay (LOCKED) at rotation 0 when inserting no matter which angle the swtich is inserted. The only way the text stays at rotation 0 is if I insert the block as is (pointing right), then align the switch to a wall. The block is created with alignment grip. So if I add the switch to a wall at an angle (eg:45 degrees), the text will be rotated and stay rotated. If I insert the switch on the left side of the wall, the attributes will be upside down. I can manually rotate the attributes back to 0 degrees and it will stay locked to 0 degrees. But what I want it to do is to be inserted at 0 degrees to begin with.
View 9 Replies
View Related
May 25, 2010
Wondering if there was a way to have text maintain a rotation angle of 0 while being included in a rotation parameter. I am wanting the "N" for my North Arrow to follow the direction of the symbol of my viewport tag without the "N" character rotation angle changing with it.
View 9 Replies
View Related
Mar 6, 2013
I have an interior elevation callout block with four arrows, noting the N, S, E, W interior wall elevations. I trick I use to rotate Text while keeping the Text oriented in the upright position is to place a Point Parameter at the center of the text then set the "Chain Actions" to Yes. Then I use the Move Action to tie the text to the Point Parameter. Next step is to use a Rotation Action to select only the Point Parameter, which rotates the Point Parameter and brings the text along with it, keeping the text oriented in the upright reading position always. As an example, think about a viewport tag with a North arrow, and the letter "N" at the arrow tip. When you rotate the arrow, the "N" position rotates with the arrow's point but always is oriented upright.
View 3 Replies
View Related
Dec 13, 2012
using AutoCAD 2009 (vanilla)
I got too smart for myself today in bringing an old drawing up to current standards...Everyone seems to want their block attributes to be zero - I have blocks where the attributes are best when they match the rotations of each blocks.
I have an old drawing that was rotated (as it should be) at approx 2deg.
I used a lisp routine to global edit all the blocks that needed to be at zero. BUT for some reason (and after hundreds of blocks were corrected), I noticed I now have two blocks that should NOT have been in the set have had their attributes rotated to zero....and the attributes should be at the same rotation as their block's rotation.
Because those two blocks have a fixed tic mark, I can click on the mark to see what the block rotation is, then rotate its attribute to that rotation, but I have hundreds of blocks! One-at-a-time sucks....
Any chance there is a GLOBAL way to edit an attribute rotation to match its own block's rotation?
View 2 Replies
View Related
Jul 26, 2012
I am using Express Tools Block Replace how do I keep the blocking being replace from rotating to the orientation of the block using for replacement?
View 2 Replies
View Related
Oct 28, 2013
I have created a dynamic block with a stretch, flip and rotate. Everything works great in its file. When I insert it in another file, the grips move but the block does not change.
AutoCAD 2014
View 2 Replies
View Related
Jul 27, 2012
I am making a template file having title block with fields. I use this template for creating layouts and sheets using Sheet Set Manager and the fields will be updated from the data of SSM. Now i would like to add a dynamic north block to my template. The block could be rotated (i have this block in file itself) and rotation angle could be inserted. Now how can i add a custom field to SSM so that i could set a rotation angle for the project and thus every new layout or sheet created using the template has the north block rotated with the angle mentioned in SSM.
Here is the file...........
View 9 Replies
View Related
Dec 13, 2013
When I use visibility of dynamic block, I found it's a great feature. But when I have more objects involved in it there will be too many states.
If we have 'visibility action' beside 'visibility set' maybe it will make thing better, when use it with lookup table. Each visibility action can has it's own set of objects. Put actions in lookup table to hide and show the set combined with them.
View 5 Replies
View Related
Jan 24, 2012
I'm having is that this is happening with a dynamic block. I don't know how it got this way...some 'genius' in my office went into this file and screwed something up, and saved it...so now I'm left with the task of fixing it.
When I go into the block, it opens as a regular drawing, with a dynamic block inside of it...as opposed to opening in the block editor. I just need to know how to get this back to the way it should be, without having to redraw the entire thing from scratch. I made a few scrap-copies of the drawing to fool around with and I can't find a solution. I tried deleting the block and purging it, I tried exploding it, and I tried saving it directly from the block editor...nothing worked.
View 5 Replies
View Related
Sep 20, 2013
I am trying to make a dynamic block below. I need the "end" of the line to be "moveable". I've tried the point parameter and the stretch action with no luck.
View 9 Replies
View Related
Oct 22, 2012
I have created a dynamic block and have applied some lookup tables to it but its not working just the way I want it. I think its to do with the custom entry on the lookup tables. If I delete the custom entry when i select the block in model space the drop down select box to allow me choose a selection is no longer available. How can I remove the custom entry and still have the block working normally. I've attached the block.
View 9 Replies
View Related
May 23, 2012
While in the Dynamic Block Editor, there times you may zoom in and out.The Parameters & Actions icons & text might get really large.
Before Ribbons, there was a flag at the top of the Display which would reset the sizes.
can not find any way to reset the sizes so I can continue the editing.
The only way I've found to accomplish that is to exit from the Block Editor and re-enter it.
View 2 Replies
View Related
Jan 17, 2012
I have a dynamic block with attributed text that I want to remain horizontal right reading even when the block is rotated. I have set up the parameters and the actions how I was taught and even revisited one of AU's downloadable lessons to try to get it correct. my settings are the same as in the lesson. I have the rotate parameter / action set to only the geometry and did not select the attributed text. I also have the attribute locked. Nothing I do gets the text to rotate with the block and stay horizontal and right reading. It will either rotate the text along with the block or just leave the text stationary. I have tried adding a point parameter to the text but that doesn't seem to work either. I am using Base ACAD 2010 I have also attached the block for troubleshooting.
View 2 Replies
View Related
Mar 18, 2012
“Dynamic block” that contains an inserted “field”,
I’m now encountered into two problems with this regard:
Why sometimes we get the number sign “####”?How can the field automatically be updated in case a “stretch” is made without the need to go and click “update fields”?How to make the “precision” of the field value (which represent the length) to be 5 such that the 2568 will appear as 2570 and the 2563 will appear as 2565
I’m attaching the block in case your time permits to have a look
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 1 Replies
View Related
Apr 19, 2013
I am trying to create a dynamic block that represents a cable with an attribute attached. The block is essentially a line that runs along the Y axis. I have created a distance parameter with a stretch action attached. The line is to remain anchored at the top and the bottom end is permitted to stretch.
Problem: I have an attribute inserted to the left side of the line (offset at -2mm TC insertion) at a rotation angle of 270. When I select the stretch grip (in the drawing environment) I would like the attribute to remain centered with the line maintain the offset and maintaining the rotation angle. I have exhausted all of my options (limited experience).
View 5 Replies
View Related
Dec 6, 2012
I was wondering if there is a way to link one parameter to another. What i'm doing is creating a theater flat block that has adjustable length and width. There are support members that are needed when it gets big enough. Right now i have them set to a Visability parameter and have to select to turn them on and off in model space. Is there a way to link the Visability so that it changes based on the Linear Distance parameter's lenth?
View 1 Replies
View Related
Apr 6, 2012
i have a dynamic block that my firm has been using. we're updating our dimstyles - and our new leader is a custom (close to open 30 but with heavy accents).
anyway - i'm a little new and vague as how to change the leader within the dynamic block. i fiddled with it several times - but with no success.
I have attached necessary files with this post
View 2 Replies
View Related
Jun 7, 2012
We have specialized electrical schematic drawings on what is termed roll-drawings. These roll-drawings are simply 12" tall and variable width type drawings. We've had some as short as 24 inches and as long as 900 inches. As a result we use these section dimensions to distinguish circuit boundaries. It's not a real dimension, just a way to distinguish what circuit is located where. I've tried to recreate it using a block for improved automation as currently we just use a lisp routine that draws an arrow and lines. It looks like the screen capture of my block below. Is it possible to have the inside endpoints of the lines automatically stretch outwardly toward the arrows as the attribute Value changs?
View 3 Replies
View Related
Apr 17, 2013
I am attaching my dynamic block that I am having difficulty finalizing. My goal is to be able to stretch or resize the hvac block, based on the size that is provided to me (ala 24x24, 36x36, 48x72, etc) (Stretch Action), I have that figured out, and I have the symbol in the center that stays centered as the block size changes, (Move Action).
Here is my problem, I want the symbol in the center to stay centered and scale based on a ratio as the overall size gets larger. So for example: if my size is a 24"x24" I want the symbol in the center to be approx 12" dia, but if the size gets up to say 60"x60" I want it to scale accordingly (so it could be like 48" dia), specifically maintaining the size based on the x axis, so if the it gets to a 60x72", I'd like it to still be centered but size according to the 60 width, and not stretch and look awkward. I want the center symbol to scale and stay centered in the rectangle as I scale the size.
View 7 Replies
View Related
Jan 24, 2013
I have created a dynamic block with stretch points. I used the tester in the block editor and all works fine, but when I insert the block into a drawing, the grips for the stretch action are in a completely different place...I don't mean a different place on the block, but a different place in the drawing...way out there. so if I go into the block editor for the block while I'm in the drawing...the parameters have now moved way out of the way also, in the block...but if I actually open up the block itself and then go into the block editor, all the parameters are where i placed them in the first place.
View 1 Replies
View Related
Dec 6, 2012
I am wondering if you can set a parameter in a dynamic block in to a visibility layer. Is this possible?
View 1 Replies
View Related
Jul 11, 2012
I designed a dynamic block to represent the profile of boreholes, and its different layers (depths, in profile) are linked to the respective description text by a leader.
Problem is when I flip the text with its leader, the tip of the arrow loses contact with the borehole. And as I flip more times, the further it gets from its original position.
View 1 Replies
View Related
