I am making a simple continuation block (attached) and I am trying to get it to have a rotation parameter along the polyline. I am able to do that, but the only issue is the flip parameter goes all weird when I do so (the text starts distancing itself from the polyline when stretched, rotated and flipped).
View 4 Replies
I have a block that I'm trying to convert for dynamic use.
In the first image, you'll see the items that I want to have rotatable in blue. The items in red should NOT rotate. That part seems to work fine. But the items that do rotate don't behave as expected.
I created the rotate parameter selecting the center of the red circle as the base point. Shouldn't that cause ALL the items to rotate about that center point?
As you'll see from the second image, the blue line rotates about some other point.
EDIT: Well I guess it only does it if I have the blue horizontal line defined with a length constraint. I also need to have that line dynamic--I need to make it longer/shorter.
I've attached a dwg file with the block in it--it's at the top of the block list (___SectMark2).
Wondering if there was a way to have text maintain a rotation angle of 0 while being included in a rotation parameter. I am wanting the "N" for my North Arrow to follow the direction of the symbol of my viewport tag without the "N" character rotation angle changing with it.
View 9 Replies View RelatedI have an interior elevation callout block with four arrows, noting the N, S, E, W interior wall elevations. I trick I use to rotate Text while keeping the Text oriented in the upright position is to place a Point Parameter at the center of the text then set the "Chain Actions" to Yes. Then I use the Move Action to tie the text to the Point Parameter. Next step is to use a Rotation Action to select only the Point Parameter, which rotates the Point Parameter and brings the text along with it, keeping the text oriented in the upright reading position always. As an example, think about a viewport tag with a North arrow, and the letter "N" at the arrow tip. When you rotate the arrow, the "N" position rotates with the arrow's point but always is oriented upright.
View 3 Replies View RelatedI've got a block that has a couple of rotation parameters. The main one works OK. But the secondary one that is incremental and only 180 doesn't. Everything looks OK but the objects don't rotate according to the parameter but 90 degrees from what I think it should.
View 2 Replies View RelatedI have been trying unsuccessfully for several days to achieve a stable setup for the attached. This is the closest I have been able to get so far but as you can see if you change the width then the rotation parameter, the stability of the block very quickly breaks down.
The problem seems to be associated with the move action which determines the center point of the angle parameter. It seems to only work properly when you change the width parameter and the rotate handle is in the 180deg. Any other position of the angle parameter results in incorrect alignment of the geometry.
So I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
Is it possible to mirror a rotation within a dynamic block?
See the attached drawing. I am trying to have two rotations within a dynamic block, but only one grip. When the grip is rotated one half of the block rotates while the other half rotates in reverse. The resulting action would be much like the wings of a butterfly.
I have tried many different combinations of parameters, actions and constraints with no luck. The block in the attached file was as close as I could get. Have I reached the end of what AutoCAD is capable of?
Just exactly what does "Angle" represent when placing a "Rotation Parameter" in a DBlock?
I've tried a bunch of diff angles and haven't noticed a difference. I'm trying to figure out just what effect diff values would have. I thought that maybe when rotating the block instance, I'd only be able rotate it "so far" (270 degrees in the example I've shown). But it still went well beyond that.
My drawing- block is a little bit complicated, it contains few actions and parameters and everytime i open block editor to add, or to modify some action I can't see my drawing because actions grips and parameters grips obscure my drawing. I tried to refresh layout but it doesn't work.
please take a look on attached jpg.
I'm just trying my hand at learning to create some dynamic blocks, but need a solution to keep the text unrotated. I have attached a file of my troublesome file for you experts to look at, if possible.
PileTest.dwg
The file is basically a plan view of 4x foundation columns for overhead line towers (pylons). These towers can be different sizes and at different orientations, hence the dynamic options I have applied. However, when I rotate the block I want the text to rotate with it (to keep aligned with each column A, B, C, D), but I don't want rotation to be applied to the text, if that makes sense?
I have a feeling that constraints might work, although I know nothing about them, but these usually lag my PC. At present I am having to explode the block and apply a 0 rotation to all the text.
We have a dynamic section marker block. You can flip it, rotate it and stretch it. Some of our drawings have a lot of them. For some instances of the block that are rotated, opening the drawing or inserting another copy of the block causes the fill in the arrow to move back to its original orientation (see images). The darn things even plot incorrectly.
Flipping the broken ones back and forth fixes them, but it is silly that a drafter would have to do that with each one.
I have a section symbol that I want to rotate and keep the text at 0degress relative to UCS. The text is not in the middle so I can't rotate about the cetner of the text. I'll attach the block so it's more clear.
Right now the only fix is to assign a seperate rotation grip to both attribute text items.
I can not for the life of me get my attributes to rotate with my block. I've attached the block to better understand what I'm talking about. I'd like the attributed text to rotate with the brown line. I don't care if the text ends up upside-down, I just want it to rotate with the block.
View 1 Replies View Relatedwhen trying to create dynamic rotation for a block with attributes. If I constrain the attribute to a line in the block it damaged the behavior of the block when using the dynamic rotation.
I tried both multiline and non- multiline attributes. I tried to fiddle with the "constraint settings" and leave only the Parallel constraint running with no effect.
When I open a new clean acad drawing and paste the block there, no problem.
We use this light switch block for work. For the life of me, I can't figure out how to make the attribute to stay (LOCKED) at rotation 0 when inserting no matter which angle the swtich is inserted. The only way the text stays at rotation 0 is if I insert the block as is (pointing right), then align the switch to a wall. The block is created with alignment grip. So if I add the switch to a wall at an angle (eg:45 degrees), the text will be rotated and stay rotated. If I insert the switch on the left side of the wall, the attributes will be upside down. I can manually rotate the attributes back to 0 degrees and it will stay locked to 0 degrees. But what I want it to do is to be inserted at 0 degrees to begin with.
View 9 Replies View RelatedI need to know where to look to find if a point parameter is visible the the current visibility state of the dynamic block reference.
View 2 Replies View RelatedGetting into Dynamic Blocks in a big way. As the blocks we use are variants of each other, if the parameters that are created in one block can be copied into another block to save having to re-do the entire parameter sets again.
View 1 Replies View RelatedIs there a way to use more then one visibility parameter in a dynamic block in autocad 2013
View 1 Replies View RelatedWe have some dnyamic block share set of parameters, if we change a parameter's value, all block that reference this parameter should be change.we can do it by program.
but create user parameters for a dynamic block must be by hand, can we create a user parameter by code? another way is user global parameter. does AutoCAD Parametric function's user value can be share with dynamic block?
I am attaching a rotate parameter and action to a dynamic block.
I get the "Specify base point" bit okay but I can't figure out what "Specify radius of parameter" does.
Do I have to include or exclude other parameters like Flip or Stretch? I get some weird results when I rotate an object with other parameters.
Is it possible to place the Grip in a specific place? It always seems to like to sit on top of another parameter name.
I would like to add a new (user) parameter to a dynamic block within my code. I have noticed that this is possible manually. But couldn't find how to do this in .Net. When this parameter has been created it would be necessary to fill in a value. So the parameter can either be a general parameter, that can be adjusted later or a (user/dynamic) parameter specific for the block.
View 1 Replies View RelatedI was wondering if there is a way to link one parameter to another. What i'm doing is creating a theater flat block that has adjustable length and width. There are support members that are needed when it gets big enough. Right now i have them set to a Visability parameter and have to select to turn them on and off in model space. Is there a way to link the Visability so that it changes based on the Linear Distance parameter's lenth?
View 1 Replies View RelatedThe "Main Stretch" parameter does not correspond with the Block Properties Table. What does this parameter need to be attached to?The paramter will adjust with the pull down options of the Block Properties Table.
View 5 Replies View RelatedI am wondering if you can set a parameter in a dynamic block in to a visibility layer. Is this possible?
View 1 Replies View RelatedIs it possible to make a dynamical block where the attribute is horizontal in combination of the alignment parameter (not rotate)? If I align to an arc the attribute need to stay at an horizontal position.
View 4 Replies View RelatedI'm struggling to hide a piece of such a block (using Visibility Parameter).
View 2 Replies View RelatedI have a block of a circle and a line coming from the left and right side quadrant of the circle to a common point (see pic). I want to create a dynamic block using a Stretch and Rotate parameter. You select the block, the Rotate point (grip) shows at the end of the two lines. I can grab that grip and rotate both lines and circle by moving this point around the screen, but cannot Stretch this point to a new location at the same time. How can I have the Rotation end point follow the Stretch parameter?
View 2 Replies View Relatedhow (if) I can set up my dynamic blocks so that I can set the parameter values as I insert the block, rather than with the grips afterwards?
To take a simple example; I have a block consisting of a rectangle, with 2 linear stretch parameters - length, width. Can I set it up so that when I insert the block, it asks for the length and breadth,just as it would for attributes.
using AutoCAD 2009 (vanilla)
I got too smart for myself today in bringing an old drawing up to current standards...Everyone seems to want their block attributes to be zero - I have blocks where the attributes are best when they match the rotations of each blocks.
I have an old drawing that was rotated (as it should be) at approx 2deg.
I used a lisp routine to global edit all the blocks that needed to be at zero. BUT for some reason (and after hundreds of blocks were corrected), I noticed I now have two blocks that should NOT have been in the set have had their attributes rotated to zero....and the attributes should be at the same rotation as their block's rotation.
Because those two blocks have a fixed tic mark, I can click on the mark to see what the block rotation is, then rotate its attribute to that rotation, but I have hundreds of blocks! One-at-a-time sucks....
Any chance there is a GLOBAL way to edit an attribute rotation to match its own block's rotation?
I'm trying to create a dynamic block that uses a parameter and an attribute definition to determine the diameter of a circle in that block. I plan to export GIS points with diameter in the attribute table into a CAD file with the block definition. I'm having trouble figuring out how to set up the parameters to read to attribute definition and adjust the circle diameter. Using AutoCAD 2013
View 5 Replies View Related
