If I zoom to page in an IDW the paper space does not fill the screen. On my screen I have 15mm of space between the paper and edge of workspace.
Is there a way to make this fill the workspace by whichever is the greater size (height or width) of paper? I just want the page to fill the screen more.
I am having problems with zoom, pan and rotate at high zoom level. The movements becoming jerky and delayed. But for whatever reason the problem exists in some assembly files and not in the others.
View 9 Replies View Related if theres a way to zoom in on a page and print only what you see
in your zoom(on the Screen). Something like Acrobat
I haven't been able to find any zoom levels between full-page view and the Ctrl-U zoom that seems to be 1:1. At full page, 12 point text is very difficult to read and edit and anything smaller is impossible. At the Ctrl-U zoom level, I get about 40 characters of 12 point text across the screen & proofreading & editing a text box is very time consuming.
View 10 Replies View RelatedI am building a highlight video for my son who is a wrestler. I had the idea at the beginning to zoom in on one of his sr pics towards his eye. I want a the video to start in his eye but as zooming is complete it will end up full page video.
View 12 Replies View RelatedThe AutoCAD doesn’t show the “intersect osnap” at certain zoom!
The “intersection osnap” between a “hatched rectangle” and a “DASHDOT2” line appears and disappears depending on the amount of zoom!
As I zoom out the “intersection osnap” appears but when I zoom in, it disappears
Why the "intersection Osnap" should disappear as I zoom in?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am working on getting some settings done, moving from 2008 to 2012. How do you set the Middle Mouse Button (wheel) to either Zoom All or Zoom Extents when you double click it? I thought it was set in the Main CUI file.
View 9 Replies View RelatedMy keyboard has a zoom key with + and - selections. I use to use this key in drawings to zoom in and out when in the AutoCAD application when we had Windows XP. Now that I have Windows 7 I can't do this. I can't find out how to assign this key on the Microsoft Keyboard interactive software either. I have the other keys assigned as desired.
Can I still use my keyboard zoom key to zoom in and out in drawings? If so, how do I set this up in AutoCAD, or do I need to do this through a Microsoft keyboard application?
I highlighted some drawing curves in a drawing by the API and now I would like to "zoom fit" the highlighted set for a better visual effect.
View 5 Replies View RelatedWhen I open my assemblys, It opens with a big Zoom in, and i cant see any thing!
I have to Zoom out every time... How can I repair this.
My company is using inventor 2010. I have 64 bit edition. When I zoom in on a dwg or ipt it zooms for like 1mm then my screen goes gray. If i click the restore down button then restore back to max drawing comes back but as soon as i try to scroll zoom again with my bamboo pen the screen grays out again. I've already updated my video driver to latest version and i've updated my bamboo pen driver to latest version. I also booted windows 7 64 bit into safe mode and check device manager to make sure no broken drivers or anything like that. Some times it will work for a few min then start graying out my screen again.
View 7 Replies View RelatedWhen I use AutoCAD Inventor:
* Rolling the mouse wheel toward me, the object zooms larger, and
* Rolling the mouse wheel away from my body, the object zooms smaller.
Just the opposite, when I use good ole' 2D AutoCAD and AutoCAD Electrical:
* Rolling the mouse wheel toward me, the object zooms smaller, and
* Rolling the mouse wheel away from my body, the object zooms larger.
Is it possible to change the zoom function in 2D AutoCAD and AutoCAD Electrical to operate in the same fashion as in Inventor . . .
If there is a way to setup in Autodesk Design Review so the line and text can look the same when it zoom in.
View 4 Replies View RelatedI'm using inventor 2010, In studio mode, I adjust the zoom or view that I want my camera to end with, when I click "Add camera action" bottom, that zoom change in or out,
View 1 Replies View RelatedIs there a setting to control the speed of the mouse wheel zoom?On the model I'm working on, it takes about 8 scrolls to go from "forestview" to "tree view", and I would like to do it in 2-3 if possible.
View 6 Replies View RelatedAfter setting up a scene with a JBL lighting environment, I changed from orthogonal to perspective view for rendering.
Funnily I was not able to zoom in with perspective view activated. Zooming slows down and finally comes completely to halt. Switching back to orthogonal the camera jumps right into the object. Changing back I see everithing from a distance.
Is this normal or is this an error. I can´t remember if this happened before.
- 2500K @ 4.2Ghz- 8GB - Radeon7970 -
- Xeon 1230V2 @ stock Ghz- 32GB - Quadro 2000 -
- Factory Design Suite Premium Subscription-
Having an issue where in a part model with the view set to "wireframe with hidden edges" the edges and hidden edges disappear when you try to zoom in on the part. Actually not working with "wireframe and visible edges only" at any zoom level either.
The edges are there and I know that there are features that should be showing up as hidden.
Running Quadro FX 3800 with the most current drivers, and I only noticed this when switching to IV 2014.
Also running IV Build 222 SP 1
This is making designing very hard as I can't tell anymore where there are instances of features interfering with each other.
Inventor Pro 2014 SP1
Vault Pro 2014
Windows 7 x64
2.53 Xeon
Quadro FX 3800
24GB RAM
Is there a way to change the color on the Zoom Window Crosshair? I would like to make it darker to be more visable against my background..
View 4 Replies View RelatedI just re-installed Inventor 2014 on my computer.
Goto your Tools menu.
Select Application Options.
Click on the Display tab.
Under 3d Navigation section (very bottom), click the checkbox for Reverse Direction.
Windows 8.1 Pro 64-bit
Intel i7 870 @ 2.93 GHz
Nvidia GeForce 580 GTX 1536MB GDDR5
8 GB Ram
250GB HDD
How to zoom in and out via the API.
I can access the camera and eye etc. but cannot find the property related to zoom. I initially thought it was to do with the position of the eye but when I use the "Zoom" by dragging the mouse button I see that the eye position doesn't change.
I would like to connect the zoom to a slide bar and zoom in and out using that.
I am making an animation in Inventor Studio. I have created all my sequences for fading and constraint animations, and now I only need to move the camera around my assembly while zooming in and out with focus on the animations.
The way I have done it so far, is as following: Created a camera (Camera1).Set my view where I wanted the camera to start.Rightclick on Camera1 and set camera to view.Then go in a few seconds on my timeline, move my view to a new area and finally "Add camera action". I've done this a couple of times with success, but now I can't do it again.
As soon as I move my view to another area, and press "Add camera action", it does as intended, but now it zooms out, making the animated area small and hard to see. I want it to be zoomed in on a detailed area, but it's changing the view to the whole assembly.
I've been trying my best to get familiar with the Autodesk Inventor COM API for the purpose of integrating a new 3D input device (the Keyglove) for intuitive control. I have worked through the "My first plugin" example, and I have basic COM integration working using VB.NET in Visual Studio 2010. I've been able to rotate the camera's view around a single axis by applying a rotation matrix transform to the camera's UpVector property:
Dim Pi As Double = 3.14159265358979
Dim appInventor As Inventor.Application
Dim oCamera As Inventor.Camera
Dim oRotAxis As Inventor.Vector
Dim oRotMatrix As Inventor.Matrix
Dim oUpVector As Inventor.UnitVector
[code]....
But I cannot for the life of me figure out how to achieve what I'm really after: a programmatic equivalent to the "Orbit" action that is done on all three rotational axes at once. I would ultimately like to reproduce all aspects of the Full Navigation Wheel through the COM API, but right now I'll settle for 3D orbiting. The pan and zoom operations seem to be doable through the ComputeWithMouseInput() method, though I'd imagine there's a better, more direct way to do that with raw camera eye/target transformation as well.
When using the Orbit tool on the Full Navigation Wheel, the mouse X/Y axes control orientation about the Y and X axes respectively, centered around the pivot point. If you hold down shift to enable "roll" mode, the mouse Y axis is ignored, and the mouse X axis controls orientation about the Z axis. The Keyglove provides angular rotation data on all three axes at once, so there is no need to toggle between X/Y control and Z control; it should be easily possible to do them all at the same time. I can't figure out how though.
lacking in familiarity with the COM API and/or the ability to visualize and code the correct spatial geometry calculations.
I use Photoshop CS2 to create Designs for webpages. These designs have pixel-exact elements, e.g. a 1-pixel-line from top to bottom.
Now when I zoom in (>100, then I have sort of anti-alias, so that the 1-pixel-line isn't only one blue anymore, but it has different blue tones. I guess for photo manipulations etc. this anti-aliasing zoom is great, but for webdesign it sucks because I don't know if only the zoom make the line "corrupt" or if it really is corrupt.
Is there a way to change this zoom?
How do I go about customizing the Inventor 'Welcome Page'?It looks like a simple enough HTML page in disguise, so I'm assuming it can be customized.
View 4 Replies View RelatedUsing Acad 2010
Is there a way to remove the *Model* page setup entry from the list of Page Setups in the Page Setup Manager? This is the first time I am seeing *Model* in the list, and I suspect that it the reason I am not able to generate a PDF for this particular drawing. When I try, I get the following error:
=========================
Job: - Error(s) Did Not Plot
Job ID: 5
Sheet set name:
Date and time started: 2/1/2012 10:34:53 AM
Date and time completed: 2/1/2012 10:34:54 AM
UserID: AchrisK
Profile ID:
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: 123456-Model - Error(s) Did Not Plot
File: C:Drawings123456.dwg
Category name:
Page setup:
Device name:
Plot file path:
Paper size:
ERROR: Internal Error: Failed to get Plot Settings Dictionary.
==================================================
I have this idea that removing *Model* from the list will do it. In addition to causing PDF creation failure, I believe it is also responsible for forcing the Model to always be in the Publish list, even though I have unchecked the "Include model when adding sheets" option. I can remove it from that list manually, but it comes back every time.
I am guessing this will be a no but is there a way to change page setup for more than 1 page at a time? I have multiple pages in a drawing that I want to change to all the same page setup.
View 3 Replies View Relatedi would like to have a page number in idw automatically ad when i added a page it will indicate "page 2", is it possible?
at the moment , i manually type a text annotation for page # for each page.
inventor 2011
vault 2012
When I do a detailed set of drawings I first start with the overall and ballon the part showing the BOM. The following pages will reflect the detailed parts balloned on the first page. Is there a way, without haveing to manually type in the BOM, to reference which page this detail is on in the BOM?
View 9 Replies View RelatedIs it possible to setup inventor to print (for example) to BY DEFAULT print A size in letter format, B size in 11x17 ect?
----------------------
Inventor 2014 PDS
Is there some way in an Inventor idw drawing to 'hide' a page. I have created an extra page with information for future changes but do not want it to printed or be counted in the total number of sheets.
View 1 Replies View Relatedrecently my zoom tool changed from default zoom in + to zoom out -
View 1 Replies View Related