When I turn on shadow or realistic mode in 3ds max my model disappears, but it will show in wireframe. How can I fix this? to see it in realistic I have to render it and it comes out fine.
Using max 2013.
I like the way the Realistic shading in viewport looks, BUT I don't like the performance hit.
It keeps turning itself on, and I keep changing it back to regular Shading.
How do I turn prevent max from using Realistic as the default shaded mode?
I have a little problem that caused my project to be stoped ,
I need to make a realistic shadow for a strip (for adresse in a business card) just like this one pointed in this image below : so the white strip looks like it pass underneath the green one
retouching of product photos.I have some furnitures photos and I need white background and realistic shadow, but I dont know how to create it in photoshop. Real shadow is no good and I need to replace it.
View 6 Replies View Relatedi have my characters merged in location with camera but i need to render character and locations separately and merge them together in some composing software. so how to get the realistic shadow of the character in a separate sequence?? so that i can merge all three of them(character, location and shadow).
View 1 Replies View RelatedI'm working on an illustration of headphones and I need to make it look as thought the wire coming out of the headphones is sitting on a table and the light source is above and casting the shadow slightly to the left.I did the below test but it looks more like you are looking at the wire from an x/y axis.
View 2 Replies View RelatedI created the text with a drop shadow.
But as soon as I flatten the image or merge visable the drop shadows disappear.I had to actually take a screen shot in order to show what I'm talking about.
Is possible that everytime I start 3ds max,the perspective viewport will be in shaded mode instead of realistic?
View 2 Replies View RelatedIs there a way NOT to improve the transparency in nitrous in realistic mode ? I really dislike the "noisy" display when moving around objects.
I know i can unselect the progressive refinement, but then the image stays noisy. I would like the transparency just to be as clean and fast as in the "shaded" mode.
while currently working with autocad architecture 2014, i found dark shadows while zooming in and also the zooming isn't smooth, however there was not such problem while i worked with much heavier file. Also the model becomes dark sometimes while zooming (not invisible, but as if the lights are switched off) ..cadtutor.PNG
View 7 Replies View RelatedI'm using Premiere Pro CC. I have created a title in title tool and I have added a drop shadow. I can see the drop shadow when I still have the title tool open. Once I close the title tool window the drop shadow disappears? I have tried different fonts nothing seems to work. Don't know what else to try?
View 3 Replies View Related“annotation scale” on the lay out mode,
I’m not sure about the current “annotation scale” in case of lay out mode.
Annotation scale option is displayed only in the model and viewport mode but not in the lay out mode (attached)!
Based on what annotative objects living on the lay out but neither in the model (or viewport) are re-sized? At this mode, there is no option to choose the annotation scale?
On other words, how to choose the annotation scale in the lay out mode?
X4. When I add a drop shadow to anything the variable attributes do not appear on the property bar, ie "flat bottom right" at top left and then the choice of colours etc. I know by now where they are so click on where I think they are, but it's annoying. I have deleted, run a reg cleaner and re-installed + added the SP2 updates.
View 3 Replies View RelatedI'm using the Ditch subassembly in my corridor and am running into a problem when using realistic mode to view.
I've applied a render material to L3, L2 and L4 which is fine but when I assign a material to L1-L5 (i.e Top) it overdraws (or otherwise fails to display) the previously assigned materials for L2, L3 and L4.
If I set the Links L1-L5 (i.e. Top) to no display then L2, L3 and L4 display as expected but when IMX'd to Infraworks the existing terrain shows through at Links L1 and L5.
Is it possible to stop this from happening and have a seperate material for L1 and L5 whilst retaining L2,L3 & L5 materials?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
The standard black color in Inventor appears as if it has a subtle texture when I use Realistic shading mode (see image). But when I edit the style there is no Use texture Image or Bump / file associated with it. I tried Realistic Appearance checked on & off in edit dialog & it makes no difference.
I want to represent a flat anodized black color for some marketing images. We have a lot of parts that use the standard black color & I really don't want to spend the time to change them all to a new custom black color (without a texture).
How can I make the standard black not have a texture in realistic & rendered modes?
I'm modeling something and when I go to wireframe the background image disappears.
"Two hours of loose philosophizing will never tilt the scales against a sound belch."
When i use panning in 2D mode the drawing disappears from my viewport. Autocad and all tools are still visible but there is nothing in drawing screen. When i zoom extent(z+e) it comes back again but in a couple minutes it disappears again while i am panning.
View 9 Replies View RelatedBelow is the image of my ribbon after I begin the edit boundary command for a floor slab. For some reason the ability to finish or cancel the edit mode disappears and I'm unable to close out of the command without undoing everything I've done.
View 9 Replies View Relatedi inserted an areas image with geomap but as i zoom cloce the image disapears and i get a tile with a white image of a camera. can i disable it? it is very annoying.i dont care if i loose ressolution if i get closer .why autodesk did that?
View 3 Replies View RelatedAs I was cropping this image from a black background (not layered), I forgot to crop a single column of black pixels. However, I almost missed it, because the canvas always has a small shadow, for the simple purpose of looks. Is there any way to turn this off?
View 3 Replies View Relatedyou have to primitives, that you've modified. These objects are one on top of the other.When you click on the one that's on top, the screen momentarily goes dark, then all you see is the object on the bottom, not the one you are say, moving.
What you should be seeing, of course is the top element, and bottom element, so, (as in this example) you can see how far you have moved it in relation to the bottom one.
My question is: is this happening because my video card is under performing?
System stats:
Windows 7 Ultimate 65bit
i7 Quad Core at 3.4Ghz (it's the 2600 chip)
8 GIGS of Ram
NVidia GT440 with 3 Gigs onboard ram (DDR3) Links to a comparison chart.
PSU 350 watts.
I just installed CS6 but when I move the clone tool around there is a shadow which is distracting to me.How can I turn that off?
View 10 Replies View RelatedI often have the need to remove the drop shadow effect. Currently what I do is to "Break Drop Shadow Group Apart" then delete it from object manager. However with other effects such as Transparency, I can simply set the Effect to None. Can this be done with Drop Shadow?
View 4 Replies View RelatedSo I have successfully used the drop shadow effect in PSE 6.
But I can't figure out how to disengage this effect. I started using the clone stamp tool after I was done with drop shadow, and now all of my clone stamps have drop shadows!
I don't want no more drop shadow. How do I get it to stop? I've looked and looked and don't see anything obvious.
We received a surface model from a vendor that I have patched up as best I can, it still has one hole that I can find that I haven't been able to fill. Ideally we would like to have a solid model, but I'm running out of time to get this done and the surface model we have would be good enough for our purposes IF I can get the yellow surface tangent lines to turn off or change their color to black.
I've attached a jpg of the surface model with the yellow lines and uploaded the model here: [URL].....
I am trying to turn an icon into a transparent icon. The icon has a shadow layer in gray scale.
I can set the shadow layer to multiply and put a colored layer under it and have the shadow appear properly, but when I try to put it over a transparent background, Photoshop turns the white pixels in the shadow visible. How can I get it to treat the layer as a black layer with different degrees of transparency?
When I turn on shadow I just get a square under the part that I modeled. If I turn on ray tracing I get a detailed shadow but then I have to wait a minute or two every time i move the model. In the video tutorial it seems that the guy has a good shadow with no raytracing.
View 2 Replies View RelatedI have this issue in rendering my model: the shadow is noisy. I tried to modify the image sampler, the type of shadow, the GI engine, shadows parameter but nothing happens.
Render is 8000pixel wide, standard direct light, vray shadow, irradiance map - brute force.
After I go through the Highlighting motions -- and fill -- then punch OK, why does the shadow not disappear?(PhotoShop 6.0)
View 2 Replies View RelatedShadow not working properly inside out model?
Buggy shadows makes engine and wings dark Without shadows
I want to wrap a logo around a baseball. All I need is the logo to be rendered in 3D, and I will use the Multiply blending mode to use the shading that's already on the baseball. How do I turn off all shading effects in the 3D interface so no additional shading is applied to the sphere the logo is being wrapped around?
View 3 Replies View Related