I have this issue in rendering my model: the shadow is noisy. I tried to modify the image sampler, the type of shadow, the GI engine, shadows parameter but nothing happens.
Render is 8000pixel wide, standard direct light, vray shadow, irradiance map - brute force.
I have a little problem during rendering interior of apartment. I am using Auto Cad 2009 and I have trouble with shadow and light. In realistic view, when I turn on the sunlight, inside of apartment iz visible only the part of the room on which the sunlight is falling through the windows, and I can't make the rest of the room visible as it should be during the day. Here are the pictures. First is without shadow and light, second is with shadow and light, and on the third is additionally turned on background sky.
1.jpeg2.jpeg3.jpeg
After I go through the Highlighting motions -- and fill -- then punch OK, why does the shadow not disappear?(PhotoShop 6.0)
View 2 Replies View RelatedShadow not working properly inside out model?
Buggy shadows makes engine and wings dark Without shadows
When I turn on shadow or realistic mode in 3ds max my model disappears, but it will show in wireframe. How can I fix this? to see it in realistic I have to render it and it comes out fine.
Using max 2013.
I have a complex building which has floors that 'shift' meaning the floors are at different angles.
I have used sheets to create elevation pages using the elevations revit creates but as there is no shading it is impossible to tell that there are different layers to the building at different points (I have added photos to show this) It looks ok if I use the 3D model instead as that uses shadowing but I can only put one view of it in the sheet.
I either need to find out how to add shadow or how to add more views f the 3D model to show the buildings shape.
I've been using AutoCAD for about eight years now for architectural support in 2D. Lately drawing models for my smaller parts and rendering to get the message across. Problem is rendering. I can never remove the segmenting of arcs and circles even in the highest of setting. Does AutoCAD have fundamental problems with rendering solids? I've used 3rd party programs for rendering also with the same results.
Example of my setting:
Viewres = 20000
Facetres= 10
Whiparc = 1
segments in a polyline curve = 30000
I have a model i created in 3ds max 2013 but need to render it out as 9 foot wide by 11 foot high .in the rendering engine i can only find 800 by 600.
View 9 Replies View RelatedAs I'm in the final days of my master project the combination of boredom and stress has struck, resulting in me moving to 3d for the first serious time.
What I'm trying to model is a train station based on a 2d design drawing I have already made. Creating small models for objects is not too hard, but for some reason AutoCAD only seems to render a limited area of my drawing, as shown on the attached JPEG.
Restarting AutoCAD solves the problem for a single render, but after that the same issue appears again.
The dwg file can be downloaded from my dropbox
I'm new to AutoCAD 3D and Rendering. In a model I'm currently working on, the colors I have in the 3D model become different colors when I create a rendering. For instance, in the model I'm working on, in the model, the object is blue, when I render it, it's grey. Is there a setting I need to change?
View 2 Replies View RelatedI am currently working on a drawing. I modeled up 6 cable QCDC's and have to position them in front of an imported Tiff file in model space so that it appears they are installed in the scene depicted in the image. I applied a gray plastic material to my models and when I go to render the scene, the Tiff file and my models are all faded drastically.
View 2 Replies View RelatedI'm using Autodesk Inventor Pro 2013.
I have a middle complexity model, with several decals (,jpg, Using Mask), projected to different parts. When I start Studio, and start rendering, Inventor hangs. The render window opens, but it freezes on Translating and soon both of the windows are not answering. I've checked th CPU. Inventor uses around 1G of ram, during regular use. When I start rendering, slowly it goes up around 5,5G, and eventually the Windows freezes. Rendering the same model without a decal works fine.
I've installed all the Windows updates, and the Inv2013 1.1 Service Pack. Nothing worked.
Windows 7 Ultimate 64bit
Intel Core i7 @ 220Ghz
6GB Dual Channel DDR3 1600MHz
nVidia GeForce GT 630M DDR3 1GB
I always convert my Nikon .NEF files to .DNG to work with them in Lightroom, but this week I opened some of the .NEF files in Nikon View NX2 and noticed they looked less grainy than their own .DNG counterparts. The .NEF file had some grain, which is to be expected, but the .DNG had noticeably more.
I was told that .DNG conversion was a lossless process, so I was surprised to find ANY difference between the two files. I also noticed some (relatively small, but non-zero) differences between their histograms.
Why would there be ANY differences at all in the NEF-->DNG conversion process? Is it not really lossless? Is there something wrong with my settings?
I'm using a Mac OSX 10.8.4 (Mountain Lion), Nikon D5100 camera, Nikon View NX2 ver.2.7.6, , and Lightroom 4.4 with Camera raw 7.4.
Sample Images: [URL] .........
I uploaded the Camera Raw update for a new Nikon P7100 to Lightroom 3 on Mac 10,7,4, but when the pics come up they're extremely noisy. When converted from RAW to jpg the noise remains.
No problem with JPGs. Same pics from the camera in RAW are fine on the Nikon viewer, so it seems to be a Lightroom mismatch.
When I export my images, the results are not nearly as good quality as on my screen. In fact, I have to throw out perfectly acceptable photos after I have completed editing because they are way too noisy after export!
View 1 Replies View RelatedI have Googled and quite aware of the noisy jpeg output for v5 onwards.
But I'm still using 4.4 and all I found on Google is threads for v5.
Here's a screengrab comparing the two.
My workflow is as follows:
raw file, retouched in LR4
chose "edit in PSE10"
PSD file, 8 bit, srgb, 300 res
my images looking quite harsh when opening the raw files, this didn't happen on the trial version, i've only just got the cs6 from adobe so is there a setting i need to change?
View 4 Replies View RelatedMaybe I'm doing this totally wrong, but why can't I output just the man and a transparent background? The key is clean in Premiere. The output file (shown) is 32 bit, so there is an alpha channel, but when played in VLC player you see the noisy background instead of black or transparent. I want to send a client a cleanly keyed video for for further editing.
Quicktime DNxHD export codec from AME
I don't know if this problem was already there in earlier 3ds max versions, but i cant find anywhere on the internet how to create a shadow on a invisible plane like matte shadow could :
View 2 Replies View Relatedwhy i cannot change the color of the background when rendering? It is always black, and i cannot attached or make new material, if need to attach jpeg or new texture on my drawing, cannot create new material. what should i do? im currently using autocad for mac 2012.
View 1 Replies View RelatedI've created a 3D product model in an application that does not have any text capabilities (Autodesk Inventor Fusion 2013). I'm trying to get that model into AfterEffects (AE) via the Photoshop live object technique.
But before I open it in AfterEffects, in Photoshop CS 5.5 Extended, I'm trying to add the product text graphics to the "Diffuse" layer of the model so, when animated in AE, all the text moves with the appropriate perspective, etc.
For the life of me I can't figure out how to format the text to fit the model.
Fusion saves files natively to .DWG format, but they appear non-standard and without some key data.
I was able save the file as a "STEP" file .stp, then translate to .3DS format. That file results in a model that opens just fine in Photoshop and when saved in .psd format, and opened in AE as a Photoshop Live object, works fine. I can't image getting the text on the surface in AE would be easier/better than Photoshop.
Each time I double click on Layer 1's Diffuse (texture) sub-layer (is that the correct term?), I can put some text in the new window, but the scale is always way wrong, the orientaion is 90 degrees off (counter clockwise), and the text is clearly trying to wrap and repeat all around the model. I'm just trying to get a set of text (several pieces in different locations - company name, product name, some small additional text) on one side of the surface bound as if it were part of the model.
As an aside, I did try to add the 3D model, converted to a .DAE file, to presets > meshes as suggested in the help files, so I could treat it like one of the 3D object presets, and add the text that way.
No matter what I do I can't get the mesh to appear in the pre-set list. I don't see any way to "activate" the mesh other than place the file in .DAE format in that folder. Yes, I've exited and re-started Photoshop many times.
Am trying to convert this pump into solid ?
View 6 Replies View RelatedWhen I zoom in or zoom out the model, normally the dimension will follow the model too.But now in Autocad 2013, even the model size change, the dimension still remain unchange. why? Is there any setting I miss out? URL....
View 2 Replies View RelatedI just got back from maternity leave and I left work at Autocad 2011 and came back on Autocad 2013. I work thru my viewports in my model space, and I've noticed that when I pan and zoom in or out or move to quickly from one point to another (didn't notice which) my model space swaps to paper even if I'm in a command. Is this something I can deactivate?
View 3 Replies View RelatedMy problem today is that I made a Model of a Part of a ship using surfaces rather than solids because the engineer thought it would be easier to bring into ANSYS program for analysis but he is now having a problem with it and I am looking into converting my current model to solid. I can do it but the method I thought of using is quite long winded and we are working to a tight deadline.
1.open up the surface part
2.use "Offset/Thicken"
3.any clashes between parts make a sketch and cut away.
the problem is the amount of plates I have and the time it takes to sort them out.
I then change to my A0 template on a different tab in the same drawing, size up the model in model space within the viewport (everything still fine), then as soon as I scale the model to 1:200 the icons I've added to the drawing (I say icon it's one particular group of icons - CCTV camera icons I've made and added) suddenly become massive and three times the size.
If I add them when already at 1:200 they're fine but it only seems to do this when I actually scale the drawing.
I have a .dxf model and I need the file in .ipt format as a 3d model. (I got the file from a website)
View 3 Replies View RelatedBasically I've got a detail specific to my design, I've extruded all of the layers up to their desired levels etc, but now I want to be able to rotate it all so that instead of these layers being orientated vertically, they are orientated horizontally, if that makes sense. I understand that there is something involved with the UCS but I'm not sure how to get this to work. This may be an issue with my computer as I know my laptop graphics card is pretty rubbish and impacts a lot of 3d programs such as Rhino and SketchUp so this could be the issue here
View 2 Replies View RelatedI need to import a pump model from a vendor into a model I've created in MEP 2011. I tried to open the .IAM file in AutoCAD 2013 using the Import function however I keep getting an error which says "The specified file is invalid or unsupported".
View 2 Replies View RelatedI am currently using AutoCAD Civil 3D 2010 for surveying work and have been trying to figure out how to use part of an existing survey of land model. I have it in a layout (paper space) and used a viewport to get the section I am after but there are some changes in labeling and minor model modifications needed to make it a stand alone model and I do not want to modify the original model to make these changes. How can I take a section like I have in view port and make it into its own model with a different scale so the changes can be made and the original model is left in tact?
View 7 Replies View Related