AutoCAD Civil 3D :: Section Of A Model As Its Own Model
Sep 11, 2013
I am currently using AutoCAD Civil 3D 2010 for surveying work and have been trying to figure out how to use part of an existing survey of land model. I have it in a layout (paper space) and used a viewport to get the section I am after but there are some changes in labeling and minor model modifications needed to make it a stand alone model and I do not want to modify the original model to make these changes. How can I take a section like I have in view port and make it into its own model with a different scale so the changes can be made and the original model is left in tact?
View 7 Replies
ADVERTISEMENT
Jun 14, 2012
CIvil 3D 2013 / My drawing opens in layout view and all model objects are appropriately coloured by layer. If I hit plot at this point, my colour dependent .ctb file works fine. However, once I swtich to model view, all my linework turns white and if I switch back to Layout view it remains white and plots each line with the weight assigned to the colour white.
View 2 Replies
View Related
Mar 15, 2013
I have a 3d model of a bridge and I would like to cut transverse sections at every pier but would like to get linework just at the spot to create plans and would like for it to be linked so if you update pier it will update section? Is this possible or something very close? Let me know what are the best ways to do this.
View 1 Replies
View Related
Jan 8, 2013
I need to model up a length of rod with a cylindrical end with a hole in it. The cylindrical end needs to be flattened slightly where the rod meets it. How to do this ? See attached picture.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 2 Replies
View Related
Apr 28, 2011
I was wondering in inventor 2010 how to create a 3d model section view of a 3d model assembly or if its even possible.
View 5 Replies
View Related
Apr 9, 2013
imagine a model of a room. if i try to look at a parallel projection view, i will see opposite walls one on top of the other. is there an easy way (meaning, in the model tab) to view just one wall?
View 3 Replies
View Related
Jun 19, 2013
Wnitake a cross section of an assebly n Invetor 3D moel t the cross section of each componet look ey similar like cement, Is there any way to change the cross section texture.
View 5 Replies
View Related
Oct 4, 2011
Am trying to convert this pump into solid ?
View 6 Replies
View Related
Sep 20, 2012
When I zoom in or zoom out the model, normally the dimension will follow the model too.But now in Autocad 2013, even the model size change, the dimension still remain unchange. why? Is there any setting I miss out? URL....
View 2 Replies
View Related
Nov 20, 2012
I just got back from maternity leave and I left work at Autocad 2011 and came back on Autocad 2013. I work thru my viewports in my model space, and I've noticed that when I pan and zoom in or out or move to quickly from one point to another (didn't notice which) my model space swaps to paper even if I'm in a command. Is this something I can deactivate?
View 3 Replies
View Related
Jan 15, 2013
My problem today is that I made a Model of a Part of a ship using surfaces rather than solids because the engineer thought it would be easier to bring into ANSYS program for analysis but he is now having a problem with it and I am looking into converting my current model to solid. I can do it but the method I thought of using is quite long winded and we are working to a tight deadline.
1.open up the surface part
2.use "Offset/Thicken"
3.any clashes between parts make a sketch and cut away.
the problem is the amount of plates I have and the time it takes to sort them out.
View 1 Replies
View Related
Feb 21, 2011
I then change to my A0 template on a different tab in the same drawing, size up the model in model space within the viewport (everything still fine), then as soon as I scale the model to 1:200 the icons I've added to the drawing (I say icon it's one particular group of icons - CCTV camera icons I've made and added) suddenly become massive and three times the size.
If I add them when already at 1:200 they're fine but it only seems to do this when I actually scale the drawing.
View 6 Replies
View Related
Apr 12, 2012
I have a .dxf model and I need the file in .ipt format as a 3d model. (I got the file from a website)
View 3 Replies
View Related
Apr 13, 2012
Basically I've got a detail specific to my design, I've extruded all of the layers up to their desired levels etc, but now I want to be able to rotate it all so that instead of these layers being orientated vertically, they are orientated horizontally, if that makes sense. I understand that there is something involved with the UCS but I'm not sure how to get this to work. This may be an issue with my computer as I know my laptop graphics card is pretty rubbish and impacts a lot of 3d programs such as Rhino and SketchUp so this could be the issue here
View 2 Replies
View Related
Jan 10, 2014
I need to import a pump model from a vendor into a model I've created in MEP 2011. I tried to open the .IAM file in AutoCAD 2013 using the Import function however I keep getting an error which says "The specified file is invalid or unsupported".
View 2 Replies
View Related
Feb 25, 2013
I'm modelling a complex curve for a fashion garment. I've always modelled in polygons in the past but have had more success on this project using nurbs, however I've got to a certain position and I'm wondering which way is the best way to model / create the next section of the garment(see image attached). Is it just the case of creating lots of section lines as lofting?
View 2 Replies
View Related
Jan 20, 2014
What I am trying to do is to model a roof using Revit Lt so that the roof tiling and battens carry on over the gable wall. Is it possible to add a void profile to the roof slab in order to achieve this or do I need to model a small section of roof to just cover the wall portion?
View 3 Replies
View Related
Oct 23, 2012
I've created a 3D product model in an application that does not have any text capabilities (Autodesk Inventor Fusion 2013). I'm trying to get that model into AfterEffects (AE) via the Photoshop live object technique.
But before I open it in AfterEffects, in Photoshop CS 5.5 Extended, I'm trying to add the product text graphics to the "Diffuse" layer of the model so, when animated in AE, all the text moves with the appropriate perspective, etc.
For the life of me I can't figure out how to format the text to fit the model.
Fusion saves files natively to .DWG format, but they appear non-standard and without some key data.
I was able save the file as a "STEP" file .stp, then translate to .3DS format. That file results in a model that opens just fine in Photoshop and when saved in .psd format, and opened in AE as a Photoshop Live object, works fine. I can't image getting the text on the surface in AE would be easier/better than Photoshop.
Each time I double click on Layer 1's Diffuse (texture) sub-layer (is that the correct term?), I can put some text in the new window, but the scale is always way wrong, the orientaion is 90 degrees off (counter clockwise), and the text is clearly trying to wrap and repeat all around the model. I'm just trying to get a set of text (several pieces in different locations - company name, product name, some small additional text) on one side of the surface bound as if it were part of the model.
As an aside, I did try to add the 3D model, converted to a .DAE file, to presets > meshes as suggested in the help files, so I could treat it like one of the 3D object presets, and add the text that way.
No matter what I do I can't get the mesh to appear in the pre-set list. I don't see any way to "activate" the mesh other than place the file in .DAE format in that folder. Yes, I've exited and re-started Photoshop many times.
View 3 Replies
View Related
Mar 4, 2008
We received a surface model from a vendor that I have patched up as best I can, it still has one hole that I can find that I haven't been able to fill. Ideally we would like to have a solid model, but I'm running out of time to get this done and the surface model we have would be good enough for our purposes IF I can get the yellow surface tangent lines to turn off or change their color to black.
I've attached a jpg of the surface model with the yellow lines and uploaded the model here: [URL].....
View 9 Replies
View Related
Apr 16, 2012
I am trying to work on a previous file in my office, and when it opens on mycomputer, it does not display as it should.
In general, the purpose of the project is to reinstate the side slopes of a road abutting a river. Cut & fill sections have been generated on 20m station increments along the road corridor/surfaces in order to calulate cut and fill as well as to reference the design to flood levels.
When I open the file, all of these sections (and there are alot) have relocated themselves to various locations in model space, none of which are aligned with the viewports that are being used for printing.
Could it be software and/or hardware incompatibility with the computer they were originally created on? (I believe it was created with C3D 2010, or C3D 2011 - I am currently running 2012)
View 2 Replies
View Related
Mar 21, 2012
I am using civil 2012 with windows 7 64 bit
I can navigate between layouts but when I try to go to the model it locks up and I have to reboot
View 3 Replies
View Related
Nov 3, 2013
So I have a topographic map on Civil 3D, is there a way to generate a 3D model of it?
View 3 Replies
View Related
Jul 8, 2013
I am trying to create a 3d model of a stockpile, i have the are at the bottom of the pile, and I have the height and area at the top, but there is a road going up to the top of the stockpile. how can I cut that road into my model? It twists around to the top its not a straight line.
View 1 Replies
View Related
Mar 27, 2013
Apparently in 2012 and confirmed in 2013, the drawings listed in the Model Views tab are seemingly unsorted. It's certainly not sorted by date or by name, which makes it difficult at best to find a file by name.
Does any copy of 2008 or earlier that could check this out, since this post says it sorted alphabetically prior to 2009 (and as I recall, it did).Other references to this bug: URLs....
View 9 Replies
View Related
Jul 9, 2012
how to import a 3d model into Revit ?
View 3 Replies
View Related
Oct 31, 2013
I am attempting to x-ref a building model that was drawn in 2013 MEP in a Civil3D drawing that contains the site surface. When I x-ref my building model into the site drawing and attempt to align and scale the building some of my walls become broken and missing. I have a feeling this is a scaling issue because on my site my north wall should be 24' long. The wall is 24' long in MEP, but that same 24' from Civil3D is only a 2' line segment in MEP. How to remedy this? I have tried scale the building model down in MEP first and it causes all kinds of problems with the door and window objects. I tried adjusting the x-ref scale prior to adding the x-ref and it does the same thing.
View 9 Replies
View Related
Nov 29, 2013
I have made a 3D model of a frame for my work; when I try to add in the dimensions I cannot find the dimension between for example one horizontal line (in front view) and one vertical line. And sometimes when I manage to click on the two lines, it says "the lines are parallel".
View 1 Replies
View Related
Apr 18, 2012
I need to create a carriageway overlay corridor on and existing carriageway that has a curved surface and not a typical crossfall. I've tried the LaneParabolic assembly but it doesn't give me the control I need to target an alignment and profile.
View 8 Replies
View Related
Jun 4, 2012
conver a 2D picture into a 3D model in .CAD format? This model is used for lasering.
View 1 Replies
View Related
Nov 12, 2013
I clicked "Hide Model and Layout Tabs" to see what it would do, and now I can't get them back. Not only did I lose them in that drawing, I lost the tabs in EVERY drawing and EVERY version of C3D. I googled the problem and every forum says the same things, and I've tried them without success:
Options >> Display >> Layout elements >> Display Layout and Model Tabs
CUI >> Workspace Properties >> Model/Layout Tabs >> On
I'm lacking a couple of icons on the lower tray to the right of the Model/Paper button.
The baffling thing is that I've lost the tabs on ALL versions of C3D. Is there a magical command line entry that will bring back my beloved tabs?
HP DV7 Laptop
Intel Core i7-3820QM 3rd Generation Quad Core 2.7 GHZ CPU
16 GB DDR3 RAM ( 2 DIMM ) / 180 GB SSD
Nvidia GeForce 650M Graphics w/2 GB Memory
Windows 7 Professional 64 bit / AutoCAD Civil 3D 2014
View 9 Replies
View Related
May 2, 2012
you have to primitives, that you've modified. These objects are one on top of the other.When you click on the one that's on top, the screen momentarily goes dark, then all you see is the object on the bottom, not the one you are say, moving.
What you should be seeing, of course is the top element, and bottom element, so, (as in this example) you can see how far you have moved it in relation to the bottom one.
My question is: is this happening because my video card is under performing?
System stats:
Windows 7 Ultimate 65bit
i7 Quad Core at 3.4Ghz (it's the 2600 chip)
8 GIGS of Ram
NVidia GT440 with 3 Gigs onboard ram (DDR3) Links to a comparison chart.
PSU 350 watts.
View 9 Replies
View Related
