Apparently in 2012 and confirmed in 2013, the drawings listed in the Model Views tab are seemingly unsorted. It's certainly not sorted by date or by name, which makes it difficult at best to find a file by name.
Does any copy of 2008 or earlier that could check this out, since this post says it sorted alphabetically prior to 2009 (and as I recall, it did).Other references to this bug: URLs....
on a couple of my lager project i have recently had issues with Autodesk Civil 3D 2012 Freezing in Model Space switching between Isometric views. the number of view changes varies each time but seams to freeze during regen of the model.
I have checked the performace tuner and updated my driver, see Attached Log.
We are in the process of changing our CAD Stations over to Windows 7 64 bit, but im not scheduled for a couple more months.
System:
Dell Precision T3400
Windows XP SP3 32 bit
Intel Core2 Quad (Q9550 @ 2.53GHz)
4GB RAM
I'm pretty new to AutoCAD,.Now I've managed to "design" a bridge and add textures etc.. Nothing as fancy as what most of you might be able to create but still learning.
Now, what i was looking to do, was print off 2D elevation and plan views of the bridge, but unfortunately the result is awful.
I have modeled object from top and from profile. How can I merge these two views into one 3d model? I tried sweep and extrude but that didn't give any results . These are the top and profile view.
View 9 Replies View RelatedI have a 2D drawing in model space that is set on the front orthographic view. If you change it, using the viewcube, to "top", the drawing appears as a straight line because it is now looking at a top view of the 2D drawing. How can I change it so that the top view will display the whole drawing?
View 2 Replies View RelatedHow to get orthographic views from a 3d model?
View 9 Replies View RelatedI need to put my 3d model on a piece of paper, so I need to have annotate and different views (FRONT and/or TOP and/or Right) of the model.
I tried to use FLATSPOT command, but all annotations (dimensions) are gone. Also, is there any easy way to do annotations?
Our customers insist that we provide our drawings in AutoCAD format and that the drawings have the views in paper space (layout) as well as the full scale view in model space. We are using an Inventor dwg to satisfy the requirement for AutoCAD format but I am not sure if we can get all of the views in model space and paper space without saving as an AutoCAD dwg and creating a viewport. I have used the "Insert in Model Space" command when you right click on a view, but this will only insert one view and then the command is no longer available. Is there a way to add all of the view to model space using this command?
View 6 Replies View RelatedI have a sheet drawing with all my background xref'd into it. How do I rotate the view in model space so it will show appropriately in the sheet view in paper space?
View 1 Replies View RelatedI am looking for a way to insert links to views in Autocad in model space.
View 3 Replies View RelatedI'm using project navigator and I want to use the intelligent title marks created by the Mode Space View drawing that is created when I use the Detail Boundary.
I have purchased a 5 hour block of support time on this and after 4 days they have not found a result for me and are looking to developers at this point.
My issue is this. I xref in the floor plan that I want to use to make some enlarged floor plan details out of. I have a custom high detail display configuration set for this view drawing. I use the detial boundary tool that adds the detail boundary and tag and then created my model space view with an intelligent titlemark that will then reflect the number and sheet when inserted into a sheet drawing.
The problem is trying to get this MSV to reflect what I see on the floor plan. As of now it just brings in a enlarged detail of the area but it's all the same color with no hatch detail.
I can change the result of what I get by selecting the “model space view” that I created and then going to properties and changing the “display controlled by” on the display tab of the properties of that object. If I change that to “Drawing default setting” then the result is set to whatever the drawing default settings are. It looks like the “default settings” for a 2D Section/Elevation object are “General” Display Representations.
how to get my custom “Bew_High Detail” display representation to be the default Display Representation of the “2D Section/Elevation” object then I think I would get my desired results.
I've never used batch plot before but I have a file that has multiple views set up in view manage in model space that I need to print. I've found instructions on how to do it from paper space but not model.
View 4 Replies View RelatedIs there a way to set the sort order in Sheet Set Manager for the Model Views tab? Seems like a few releases ago it was alphabetical - now its random and almost impossible to locate a specific drawing in a large project.
Tried changing MAXSORT and it did not have an effect.
Within the drawing title block we have a 'Text' of type 'Custom Properties - Model' which pulls in a custom iprop from a model which is the models finished weight. This is a common way of auto populating title box entries.
The problem is that the sheet populates the text with the info related to the first viewport placed upon the drawing.
Whilst fine when planned for properly, I quite often encounter upon large multisheet detail drawings, that a user when detailing an IAM, will have forgotten to put the IAM view down first, especially later in the drawing series where the IAM is not required and the user is detailing IPT's.
What I am looking for is a way to change which viewport the border properties are related to ideally, so that if a user has forgotten to place the IAM but has placed 20 IPT's down, I could place an IAM outside of the maximum area, as the 21st object but fool Inventor into thinking this was the first viewport placed down, thus populating the border info correctly.
I don't know of a way to do this currently, either with current Inventor functionality, or by programmatic approach - our current fix is to have the user create another drawing sheet, place the IAM outside the maximum area, copy all his IPT viewports across from the first sheet, then delete the first sheet. Is it possible to change the object order of placed viewports with less disruption?
My group and I are getting an infrequent but annoying problem with Model Documentation (MD) generated views in paperspace layout tabs. We all on autocad 2013, with sp1.1 installed on x64 machines.
We are seeing objects/ blocks showing in the MD views (viewbase created) in the layout that are no longer in model space. One common factor in this is that these objects seem to always be externally referenced (xref) files that have been either unloaded or completely detached (both cases purges preformed afterwards to wipe any remaining blocks made no difference). In this latest case the ghost objects show up twice (we needed 2 of the same xref) at what appears to be the correct old coordinates.
We have no work around for this and when this occurs we either have to revert to an older version from vault or create a new dwg, port all information over and recreate all views. The interesting thing about this problem is that if we revert to an older version from vault, the ghosts do not reappear/ reoccur at the same commands they appeared at previously.
Im working with Autocad 2012, havent done much with 3-d modeling. I have a model drawn and I simply want to print it with the top, front, right and an iso view on one piece of paper.
View 2 Replies View RelatedI have two models in Revit 2011 that have items that are not showing in any views. I restored a backup and tried to copy and paste between the two models and it warns me that there are duplicate items in the same area. Once I get this message all remaining components of that type show up.
I made sure the items weren't hidden or turned off in the model and the views.
PSE11 organizer is apparently "unsorting" images imported from disc. Consequently sequences of pics are completely mixed up. Can it be corrected?
View 2 Replies View RelatedI have a complex building which has floors that 'shift' meaning the floors are at different angles.
I have used sheets to create elevation pages using the elevations revit creates but as there is no shading it is impossible to tell that there are different layers to the building at different points (I have added photos to show this) It looks ok if I use the 3D model instead as that uses shadowing but I can only put one view of it in the sheet.
I either need to find out how to add shadow or how to add more views f the 3D model to show the buildings shape.
I am currently using AutoCAD Civil 3D 2010 for surveying work and have been trying to figure out how to use part of an existing survey of land model. I have it in a layout (paper space) and used a viewport to get the section I am after but there are some changes in labeling and minor model modifications needed to make it a stand alone model and I do not want to modify the original model to make these changes. How can I take a section like I have in view port and make it into its own model with a different scale so the changes can be made and the original model is left in tact?
View 7 Replies View RelatedI am trying to create section views to track beach erosion. I have created an alignment and sample lines successfully. The shorter sections look as they should. The longer sections are a mirror of themselves (ex: a section that should be 529' in length is drawn as 1058'). Is this a matter of needing to create a corridor and going the other processes that normally have to be done for a road or is there something else I am missing here?
View 7 Replies View RelatedI'm working with civil 3d 2012,I'm trying to find a solution for the following problem,in Civil I have an alignment of 2kilometer and they want a section view every 5 meters,
automatically I can create over 500 section views, no problem there,but then I want to plot these 500 section views to a png file,and to do that I need to get all of them in separated layouts, for which there also is an automated function but its stops at 255 layouts,I've done 4 km in split up drawings..I've got 40km left no option splitting it up in 1 km sections.
I want to be able to orbit and pan beneath a surface to see the relationship of pipes and structures to the surface. Its as though you were looking up at the ceiling in a room. Using orbit is limited because it flips the surface over (upside down), when trying to view the underside of a surface.
View 3 Replies View RelatedI can get all of the same section views on the same page. I'm using sample line group
View 1 Replies View RelatedI have the task of creating elevation views of a site. These views require that the model be clipped along a section line to crop the forground so it doesn't obstruct the view of the site.
I've experimented with the section plane tools in the 3D modeling workspace but I can't get a section view. I suspect it is because they don't work with C3D surface objects. Any workflow for this task? Ultimately I need to generate hard copies of the views for the architect to use for his landscape plans.
how to get the sections to center or to add a x, y offset distance.The only options I have found for placement are lower left, lower right, upper left, upper right.
View 1 Replies View RelatedWhen I open a Civil 3D drawing, there are two views. One is showing alignment plan and the other one showing profile. Actually they are in same model space. How to turn off one of them and how to make two views like that.
View 2 Replies View RelatedI've got a client requesting a 3d view from an intersection. He wants to see the visibility of his store compared to a view vantage points that passengers would be at.
I don't need to create a drive pattern as of right now. He just wants stills of what a driver or passenger would see from a few requested points. I haven't used anything other than the object viewer to see my models in 3d.
When i bring my section views in, the cross sections display on top of each other, i attached a screen capture.
View 2 Replies View RelatedI am trying to create a second base view (using Layout/Create View/Base from model space). The problem is, I need it to be rotated from the original base view. However, when I rotate the part in model space, ALL of my views change.
So I guess my question is, how do I create multiple views of the same part that are seperate from the other base views?
i have views lets say 3 views on a sheet but in the list of views theres mores that appears maybe i inserted the extra views that are showing but i deleted them to put them on another sheet
the problem is they show up in the list of both sheet and i can't delete them from the list of the sheet that they were before